TPS65176
- 9.5V to 14V Input Voltage Range
- Up to 18.5V Boost Converter with 3.5-A Switch Current
- 500kHz to 2 MHz Adjustable Switching Frequency for Boost Converter
- 2.5-A Buck Converter Switch Current Limit
- Fixed 750kHz Switching Frequency for Buck Converter
- Two Charge Pump Controllers for VGON and VGOFF
- Adjustable Power-on Sequence
- Gate Driver Signal for Isolation Switch
- Internal Soft-Start
- Undervoltage Lockout
- Over Voltage Protection
- Short Circuit Protection
- Thermal Shutdown
The TPS65176 provides a simple and economic power supply solution for a wide variety of LCD bias applications. A buck converter generates a logic supply for the timing controller (T-CON) while a boost converter generates the AVDD voltage to power the Source Driver ICs. Two regulated charge pump controllers generate VGON and VGOFF with very few external components to turn on and off the display transistors. The sequencing of the supplies at power on is fully controllable by the user. The TPS65176 also includes various protection mechanisms to ensure the safe operation of the LCD panels.
技術文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 6 類型 | 標題 | 日期 | ||
---|---|---|---|---|
* | Data sheet | LCD Bias Integrated Circuit for TV datasheet | 2012年 10月 16日 | |
Application note | Basic Calculation of a Boost Converter's Power Stage (Rev. D) | PDF | HTML | 2022年 10月 28日 | |
Application note | Understanding Undervoltage Lockout in Power Devices (Rev. A) | 2018年 9月 19日 | ||
Selection guide | Power Management Guide 2018 (Rev. R) | 2018年 6月 25日 | ||
Application note | Generation of a VCOM buffer input using PWM signal | 2015年 12月 21日 | ||
Application note | Minimizing Ringing at the Switch Node of a Boost Converter | 2006年 9月 15日 |
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
模擬工具
PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具
PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
---|---|---|
VQFN (RHD) | 28 | Ultra Librarian |
訂購與品質
內含資訊:
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
內含資訊:
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。