TSC2117

現行

具低功耗單聲道 ADC/立體聲 DAC 的 4 線觸摸式螢幕控制器

立即訂購

產品規格表

document-pdfAcrobat Audio Codec with Embedded miniDSP, Stereo Class-D Speaker Amplifier datasheet (Rev. B) (英文)

TSC2117

現行

產品規格表

立即訂購

產品詳細資料

Digital audio interface

DSP, I2S, L, R, TDM

Rating

Catalog

Features

Beep generator, MiniDSP, Phase-locked loop (PLL), Stereo Class-D amplifier

Operating temperature range (°C)

-40 to 85

Digital audio interface

DSP, I2S, L, R, TDM

Rating

Catalog

Features

Beep generator, MiniDSP, Phase-locked loop (PLL), Stereo Class-D amplifier

Operating temperature range (°C)

-40 to 85

VQFN (RGZ)

48

49 mm² 7 x 7

Low-Power 13-mW Stereo 48-kHz Playback
Stereo Audio DAC and Monaural ADC Support 8-kHz to 192-kHz Sample Rates
Instruction-Programmable miniDSP Available for Record and Playback Paths
Bass Boost/Treble/EQ With up to Five Biquads for Record and up to Six Biquads for Playback
Stereo 1.29-W Class-D BTL 8-Ω Speaker Driver With Direct Battery Connection
Smart Four-Wire Touch-Screen Controller With Autonomous Timing
Programmable-Gain Amplifiers
Microphone Bias
Hardware-Implemented AGC Used With Microphone Input for Audio ADC Path
Digital Microphone Interface
Digital Mixing Capability
Pin Control or Register Control for Digital-Playback Volume-Control Settings
Programmable 12-Bit SAR ADC
Built-In Capability for Temperature, Battery, or Auxiliary Measurements
Programmable DRC for Digital Playback
Sine-Wave Generator for Beep Generator for Touch-Pad Press Acknowledgement
Integrated PLL Used for Programmable Digital Audio Processor
SPI, I²C, and I²S Serial Interfaces
SPI , I²C Have Register Auto-Increment
Full Power-Down Control
Power Supplies:
- Analog: 2.7 V–3.6 V
- Digital Core: 1.65 V–1.95 V
- Digital I/O: 1.1 V–3.6 V
- Class-D: 2.7 V–5.5 V (SLVDD and SRVDD ≥ AVDD)
7-mm × 7-mm 48-QFN Package
APPLICATIONS
- Portable Gaming Devices
- Mobile Internet Devices
- Adaptive Filtering Applications

All other trademarks are the property of their respective owners

Low-Power 13-mW Stereo 48-kHz Playback
Stereo Audio DAC and Monaural ADC Support 8-kHz to 192-kHz Sample Rates
Instruction-Programmable miniDSP Available for Record and Playback Paths
Bass Boost/Treble/EQ With up to Five Biquads for Record and up to Six Biquads for Playback
Stereo 1.29-W Class-D BTL 8-Ω Speaker Driver With Direct Battery Connection
Smart Four-Wire Touch-Screen Controller With Autonomous Timing
Programmable-Gain Amplifiers
Microphone Bias
Hardware-Implemented AGC Used With Microphone Input for Audio ADC Path
Digital Microphone Interface
Digital Mixing Capability
Pin Control or Register Control for Digital-Playback Volume-Control Settings
Programmable 12-Bit SAR ADC
Built-In Capability for Temperature, Battery, or Auxiliary Measurements
Programmable DRC for Digital Playback
Sine-Wave Generator for Beep Generator for Touch-Pad Press Acknowledgement
Integrated PLL Used for Programmable Digital Audio Processor
SPI, I²C, and I²S Serial Interfaces
SPI , I²C Have Register Auto-Increment
Full Power-Down Control
Power Supplies:
- Analog: 2.7 V–3.6 V
- Digital Core: 1.65 V–1.95 V
- Digital I/O: 1.1 V–3.6 V
- Class-D: 2.7 V–5.5 V (SLVDD and SRVDD ≥ AVDD)
7-mm × 7-mm 48-QFN Package
APPLICATIONS
- Portable Gaming Devices
- Mobile Internet Devices
- Adaptive Filtering Applications

All other trademarks are the property of their respective owners

The TSC2117 is a low-power, highly integrated, high-performance codec and touch-screen controller which features stereo class-D speaker amplifiers, a stereo audio DAC, mono audio ADC, and a SAR ADC.

The TSC2117 supports 16-bit stereo playback and monaural record functionality. The device integrates several analog features, such as a microphone interface, headphone drivers, and speaker drivers. The TSC2117 has two fully programmable miniDSPs for digital audio processing. The digital audio data format is programmable to work with popular audio standard protocols (I²S, left/right-justified) in master, slave, DSP, and TDM modes. Bass boost, treble, or EQ are supported by the preprogrammed modes of the programmable digital signal-processing block. An on-chip PLL provides the high-speed clock needed by the digital signal-processing block. The volume level can be controlled by either a pin control or by register control.

The TSC2117 has a 12-bit SAR ADC converter that supports a four-wire resistive touch-screen complete with drivers. All functions can be controlled by an I²C or SPI interface. A programmable beep generator is included. An on-chip processor is used in the touch-screen mode and provides extensive features specifically designed to reduce the host-processor and interface-bus overhead. The TSC2117 has three dedicated analog inputs for system voltage measurements, with an on-chip temperature sensor that can be read by the SAR ADC, and is available in a 7-mm × 7-mm 48-pin QFN package.

This data manual is designed using PDF document-viewing features that allow quick access to information. For example, performing a global search on, e.g., "page 0/register 15" produces all references to this page and register in a list. This makes is easy to traverse the list and find all information related to a page and register. Note that the search string must be of the indicated format. Also, this document includes document hyperlinks to allow the user to quickly find a document reference. To come back to the original page, click the green left arrow near the PDF page number at the bottom of the file. The hot-key for this function is alt-left arrow on the keyboard. Another way to find information quickly is to use the PDF bookmarks.

The TSC2117 is a low-power, highly integrated, high-performance codec and touch-screen controller which features stereo class-D speaker amplifiers, a stereo audio DAC, mono audio ADC, and a SAR ADC.

The TSC2117 supports 16-bit stereo playback and monaural record functionality. The device integrates several analog features, such as a microphone interface, headphone drivers, and speaker drivers. The TSC2117 has two fully programmable miniDSPs for digital audio processing. The digital audio data format is programmable to work with popular audio standard protocols (I²S, left/right-justified) in master, slave, DSP, and TDM modes. Bass boost, treble, or EQ are supported by the preprogrammed modes of the programmable digital signal-processing block. An on-chip PLL provides the high-speed clock needed by the digital signal-processing block. The volume level can be controlled by either a pin control or by register control.

The TSC2117 has a 12-bit SAR ADC converter that supports a four-wire resistive touch-screen complete with drivers. All functions can be controlled by an I²C or SPI interface. A programmable beep generator is included. An on-chip processor is used in the touch-screen mode and provides extensive features specifically designed to reduce the host-processor and interface-bus overhead. The TSC2117 has three dedicated analog inputs for system voltage measurements, with an on-chip temperature sensor that can be read by the SAR ADC, and is available in a 7-mm × 7-mm 48-pin QFN package.

This data manual is designed using PDF document-viewing features that allow quick access to information. For example, performing a global search on, e.g., "page 0/register 15" produces all references to this page and register in a list. This makes is easy to traverse the list and find all information related to a page and register. Note that the search string must be of the indicated format. Also, this document includes document hyperlinks to allow the user to quickly find a document reference. To come back to the original page, click the green left arrow near the PDF page number at the bottom of the file. The hot-key for this function is alt-left arrow on the keyboard. Another way to find information quickly is to use the PDF bookmarks.

filter

尋找其它音訊轉碼器

下載