TX7364
- Transmitter supports:
- 64-channel 3-level pulser and active transmit/ receive (T/R) switch
- 3-level pulser:
- Maximum output voltage: ±100V
- Minimum output voltage: ±1V
- Maximum output current: 1A
- True return to zero to discharge output to ground
- Second harmonic of –40dBc at 5MHz
- –3-dB Bandwidth with 400Ω || 125pF load
- 22MHz for a ±100-V supply
- Very low receive power: 0.1 mW/ch
- Active transmit/receive (T/R) switch with:
- Turn on resistance of 26Ω
- Turn on and Turn off time: 100ns
- Transient glitch: 10mVPP
- On-chip beam former with:
- Channel based T/R switch on and off controls
- Delay resolution: half beamformer clock period, minimum 2.5ns
- Maximum delay: 214 beamformer clock period
- Maximum beamformer clockspeed: 200MHz
- On-Chip RAM for pattern and delay profile
- One 512 × 32 memory to store beam-former pattern and delay for a group of 4 channels
- Global repeat feature present, enabling long duration patterns
- High-speed (400 MHz maximum), 2-lane LVDS serial programming interface.
- Low programming time: ≈2.5 us for delay profile update
- 32-bit Checksum to detect wrong SPI writes
- Supports CMOS serial programming interface (50 MHz maximum)
- High reliability features:
- Internal temperature sensor and automatic thermal shutdown
- No specific power sequencing requirement
- Error flag register to detect faulty conditions
- Integrated passives for the floating supplies and bias voltages
- Small package: FC-BGA-196 (12 mm × 12 mm) with 0.8-mm pitch
TX7364 is a highly integrated, high-performance transmitter device for ultrasound imaging system. The device has total 64 pulser circuits, 64 transmit/ receive switches (referred as T/R or TR switches) and supports on-chip beamformer (TxBF). The device also integrates on-chip floating power supplies that reduce the number of required high voltage power supplies.
TX7364 has a pulser circuit that generates three-level high voltage pulses (up to ±100 V) that is used to excite multiple channels of an ultrasound transducer. The device supports total 64 outputs. The maximum output current is 1A.
Device can be used as a transmitter solution for many applications like ultrasound imaging, non-destructive testing, SONAR, LIDAR, marine navigation system, brain imaging systems and so on.

索取更多資訊
提供完整的產品規格表和其他設計資源。立即索取
技術文件
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具
封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
---|---|---|
FCCSP (ACP) | 196 | Ultra Librarian |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。