LM4050-N
- Small Package: SOT-23
- No Output Capacitor Required
- Tolerates Capacitive Loads
- Fixed Reverse Breakdown Voltages of 2.048 V,
2.5 V, 4.096 V, 5 V, 8.192 V, and 10 V - Key Specifications (LM4050-N)
- Output Voltage Tolerance (A Grade, 25°C)
±0.1% (Maximum) - Low Output Noise (10 Hz to 10 kHz) 41 µVrms
(Typical) - Wide Operating Current Range 60 µA to 15
mA - Industrial Temperature Range –40°C to 85°C
- Extended Temperature Range –40°C to 125°C
- Low Temperature Coefficient 50 ppm/°C (max)
- LM4050-N-Q1 is AEC-Q100 Grade 1 Qualified
and are Manufactured on an Automotive
Grade Flow
- Output Voltage Tolerance (A Grade, 25°C)
Ideal for space-critical applications, the LM4050-N precision voltage reference is available in the sub-miniature (3 mm × 1.3 mm) SOT-23 surface-mount package. The LM4050-N design eliminates the need for an external stabilizing capacitor while ensuring stability with any capacitive load, thus making the LM4050-N easy to use. Further reducing design effort is the availability of several fixed reverse breakdown voltages: 2.048 V, 2.5 V, 4.096 V, 5 V, 8.192 V, and 10 V. The minimum operating current increases from 60 µA for the LM4050-N-2.0 to 100 µA for the LM4050-N-10.0. All versions have a maximum operating current of 15 mA.
The LM4050-N utilizes fuse and Zener-zap reverse breakdown voltage trim during wafer sort to ensure that the prime parts have an accuracy of better than ±0.1% (A grade) at 25°C. Bandgap reference temperature drift curvature correction and low dynamic impedance ensure stable reverse breakdown voltage accuracy over a wide range of operating temperatures and currents.
All grades and voltage options of the LM4050-N are available in both an industrial temperature range (40°C and 85°C) and an extended temperature range (40°C and 125°C).
Technical documentation
Type | Title | Date | ||
---|---|---|---|---|
* | Data sheet | LM4050-N/-Q1 Precision Micropower Shunt Voltage Reference datasheet (Rev. G) | PDF | HTML | 30 Sep 2015 |
Application note | Voltage Reference Selection and Design Tips For Data Converters (Rev. B) | PDF | HTML | 09 Jan 2024 | |
E-book | Voltage Supervisor and Reset ICs: Tips, Tricks and Basics | 28 Jun 2019 |
Design & development
For additional terms or required resources, click any title below to view the detail page where available.
LM4050-NA2P048 Unencrypted PSpice Transient Model
LM4050-NA2P5 Unencrypted PSpice Transient Model (Rev. A)
LM4050-NA4P096 Unencrypted PSpice Transient Model
LM4050-NA8P192 Unencrypted PSpice Transient Model
LM4050-NB2P048 Unencrypted PSpice Transient Model
LM4050-NB4P096 Unencrypted PSpice Transient Model Package (Rev. A)
LM4050-NB8P192 Unencrypted PSpice Transient Model
LM4050-NC2P048 Unencrypted PSpice Transient Model
LM4050-NC4P096 Unencrypted PSpice Transient Model
LM4050-NC8P192 Unencrypted PSpice Transient Model
LM4050_NA10P0 TINA-TI Reference Design
LM4050_NA10P0 TINA-TI Transient Spice Model
LM4050_NA2P048 TINA-TI Transient Reference Design
LM4050_NA2P048 TINA-TI Transient Spice Model
LM4050_NA2P5 TINA-TI Reference Design
LM4050_NA2P5 TINA-TI Transient Spice Model
LM4050_NA4P096 TINA-TI Transient Reference Design
LM4050_NA4P096 TINA-TI Transient Spice Model
LM4050_NA5P0 TINA-TI Reference Design
LM4050_NA5P0 TINA-TI Transient Spice Model
LM4050_NA8P192 TINA-TI Transient Reference Design
LM4050_NA8P192 TINA-TI Transient Spice Model
LM4050_NB4P096 Unencrypted PSpice Transient Model
SHUNT_VOLTAGE_REFERENCE_RESISTOR_CALCULATOR — Shunt Voltage Reference External Resistor Quick Start Calculator
This external resistor quick-start calculator tool lets you easily calculate valid external resistor values relative to voltage reference, supply and load-current bounds. With these inputs, you can instantly view the resulting calculations and use the color-coded indications to understand (...)
Supported products & hardware
Products
Die & wafer services
Shunt voltage references
Current references
PSPICE-FOR-TI — PSpice® for TI design and simulation tool
Package | Pins | CAD symbols, footprints & 3D models |
---|---|---|
SOT-23 (DBZ) | 3 | Ultra Librarian |
Ordering & quality
- RoHS
- REACH
- Device marking
- Lead finish/Ball material
- MSL rating/Peak reflow
- MTBF/FIT estimates
- Material content
- Qualification summary
- Ongoing reliability monitoring
- Fab location
- Assembly location
Support & training
TI E2E™ forums with technical support from TI engineers
Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.
If you have questions about quality, packaging or ordering TI products, see TI support.