SLVSEO1A August   2021  – May 2022 ADC08DJ5200RF

PRODUCTION DATA  

  1. 1 Features
  2. 2 Applications
  3. 3 Description
  4. 4 Revision History
  5. 5 Pin Configuration and Functions
  6. 6 Specifications
    1. 6.1  Absolute Maximum Ratings
    2. 6.2  ESD Ratings
    3. 6.3  Recommended Operating Conditions
    4. 6.4  Thermal Information
    5. 6.5  Electrical Characteristics: DC Specifications
    6. 6.6  Electrical Characteristics: Power Consumption
    7. 6.7  Electrical Characteristics: AC Specifications (Dual-Channel Mode)
    8. 6.8  Electrical Characteristics: AC Specifications (Single-Channel Mode)
    9. 6.9  Timing Requirements
    10. 6.10 Switching Characteristics
    11. 6.11 Typical Characteristics
  7. 7 Detailed Description
    1. 7.1 Overview
    2. 7.2 Functional Block Diagram
    3. 7.3 Feature Description
      1. 7.3.1 Device Comparison
      2. 7.3.2 Analog Inputs
        1. 7.3.2.1 Analog Input Protection
        2. 7.3.2.2 Full-Scale Voltage (VFS) Adjustment
        3. 7.3.2.3 Analog Input Offset Adjust
      3. 7.3.3 ADC Core
        1. 7.3.3.1 ADC Theory of Operation
        2. 7.3.3.2 ADC Core Calibration
        3. 7.3.3.3 Analog Reference Voltage
        4. 7.3.3.4 ADC Overrange Detection
        5. 7.3.3.5 Code Error Rate (CER)
      4. 7.3.4 Temperature Monitoring Diode
      5. 7.3.5 Timestamp
      6. 7.3.6 Clocking
        1. 7.3.6.1 Noiseless Aperture Delay Adjustment (tAD Adjust)
        2. 7.3.6.2 Aperture Delay Ramp Control (TAD_RAMP)
        3. 7.3.6.3 SYSREF Capture for Multi-Device Synchronization and Deterministic Latency
          1. 7.3.6.3.1 SYSREF Position Detector and Sampling Position Selection (SYSREF Windowing)
          2. 7.3.6.3.2 Automatic SYSREF Calibration
      7. 7.3.7 Programmable FIR Filter (PFIR)
        1. 7.3.7.1 Dual Channel Equalization
        2. 7.3.7.2 Single Channel Equalization
        3. 7.3.7.3 Time Varying Filter
      8. 7.3.8 JESD204C Interface
        1. 7.3.8.1 Transport Layer
        2. 7.3.8.2 Scrambler
        3. 7.3.8.3 Link Layer
        4. 7.3.8.4 8B/10B Link Layer
          1. 7.3.8.4.1 Data Encoding (8B/10B)
          2. 7.3.8.4.2 Multiframes and the Local Multiframe Clock (LMFC)
          3. 7.3.8.4.3 Code Group Synchronization (CGS)
          4. 7.3.8.4.4 Initial Lane Alignment Sequence (ILAS)
          5. 7.3.8.4.5 Frame and Multiframe Monitoring
        5. 7.3.8.5 64B/66B Link Layer
          1. 7.3.8.5.1 64B/66B Encoding
          2. 7.3.8.5.2 Multiblocks, Extended Multiblocks and the Local Extended Multiblock Clock (LEMC)
          3. 7.3.8.5.3 Block, Multiblock and Extended Multiblock Alignment using Sync Header
            1. 7.3.8.5.3.1 Cyclic Redundancy Check (CRC) Mode
            2. 7.3.8.5.3.2 Forward Error Correction (FEC) Mode
          4. 7.3.8.5.4 Initial Lane Alignment
          5. 7.3.8.5.5 Block, Multiblock and Extended Multiblock Alignment Monitoring
        6. 7.3.8.6 Physical Layer
          1. 7.3.8.6.1 SerDes Pre-Emphasis
        7. 7.3.8.7 JESD204C Enable
        8. 7.3.8.8 Multi-Device Synchronization and Deterministic Latency
        9. 7.3.8.9 Operation in Subclass 0 Systems
      9. 7.3.9 Alarm Monitoring
        1. 7.3.9.1 Clock Upset Detection
        2. 7.3.9.2 FIFO Upset Detection
    4. 7.4 Device Functional Modes
      1. 7.4.1 Dual-Channel Mode
      2. 7.4.2 Single-Channel Mode (DES Mode)
      3. 7.4.3 Dual-Input Single-Channel Mode (DUAL DES Mode)
      4. 7.4.4 JESD204C Modes
        1. 7.4.4.1 JESD204C Operating Modes Table
        2. 7.4.4.2 JESD204C Modes continued
        3. 7.4.4.3 JESD204C Transport Layer Data Formats
        4. 7.4.4.4 64B/66B Sync Header Stream Configuration
      5. 7.4.5 Power-Down Modes
      6. 7.4.6 Test Modes
        1. 7.4.6.1 Serializer Test-Mode Details
        2. 7.4.6.2 PRBS Test Modes
        3. 7.4.6.3 Clock Pattern Mode
        4. 7.4.6.4 Ramp Test Mode
        5. 7.4.6.5 Short and Long Transport Test Mode
          1. 7.4.6.5.1 Short Transport Test Pattern
        6. 7.4.6.6 D21.5 Test Mode
        7. 7.4.6.7 K28.5 Test Mode
        8. 7.4.6.8 Repeated ILA Test Mode
        9. 7.4.6.9 Modified RPAT Test Mode
      7. 7.4.7 Calibration Modes and Trimming
        1. 7.4.7.1 Foreground Calibration Mode
        2. 7.4.7.2 Background Calibration Mode
        3. 7.4.7.3 Low-Power Background Calibration (LPBG) Mode
      8. 7.4.8 Offset Calibration
      9. 7.4.9 Trimming
    5. 7.5 Programming
      1. 7.5.1 Using the Serial Interface
        1. 7.5.1.1 SCS
        2. 7.5.1.2 SCLK
        3. 7.5.1.3 SDI
        4. 7.5.1.4 SDO
        5. 7.5.1.5 Streaming Mode
    6. 7.6 SPI Register Map
  8. 8 Application Information Disclaimer
    1. 8.1 Application Information
    2. 8.2 Typical Applications
      1. 8.2.1 Reconfigurable Dual-Channel 5-GSPS or Single-Channel 10-Gsps Oscilloscope
        1. 8.2.1.1 Design Requirements
          1. 8.2.1.1.1 Input Signal Path
          2. 8.2.1.1.2 Clocking
          3. 8.2.1.1.3 ADC08DJ5200RF
    3. 8.3 Initialization Set Up
  9. 9 Power Supply Recommendations
    1. 9.1 Power Sequencing
  10. 10Layout
    1. 10.1 Layout Guidelines
    2. 10.2 Layout Example
  11. 11Device and Documentation Support
    1. 11.1 Device Support
      1. 11.1.1 Development Support
        1. 11.1.1.1 123
    2. 11.2 Documentation Support
      1. 11.2.1 Related Documentation
    3. 11.3 Receiving Notification of Documentation Updates
    4. 11.4 Support Resources
    5. 11.5 Trademarks
    6. 11.6 Electrostatic Discharge Caution
    7. 11.7 Glossary
  12. 12Mechanical, Packaging, and Orderable Information

Package Options

Mechanical Data (Package|Pins)
Thermal pad, mechanical data (Package|Pins)
Orderable Information

6.7 Electrical Characteristics: AC Specifications (Dual-Channel Mode)

typical values at TA = 25°C, VA19 = 1.9 V, VA11 = 1.1 V, VD11 = 1.1 V, default full-scale voltage, fIN = 347 MHz, AIN = –1 dBFS, fCLK = 5.2GHz, filtered 1-VPP sine-wave clock, JMODE = 8, Dither enabled with default settings, VA11, VD11 and VS11 noise suppression ON (EN_VA11_NOISE_SUPPR = EN_VD11_NOISE_SUPPR = EN_VS11_NOISE_SUPPR = 1), and background calibration (unless otherwise noted); minimum and maximum values are at nominal supply voltages and over the operating free-air temperature range provided in the Recommended Operating Conditions table
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
FPBW Full-power input bandwidth (–3 dB)(1) Foreground calibration 8.1 GHz
Background calibration 8.1
XTALK Channel-to-channel crosstalk Aggressor = 1 GHz, –1 dBFS –81 dB
Aggressor = 3 GHz, –1 dBFS –76
Aggressor = 6 GHz, –1 dBFS –69
CER Code error rate Maximum CER, does not include JESD204C interface BER 10–18 Errors/ sample
NOISEDC DC input noise standard deviation No input, foreground calibration, excludes DC offset, includes fixed interleaving spur (fS / 2 spur) 0.26 LSB
NSD Noise spectral density, excludes fixed interleaving spur (fS / 2 spur) Maximum full-scale voltage (VFS = 1.0 VPP), AIN = –20 dBFS –143.4 dBFS/
Hz
Default full-scale voltage (VFS = 0.8 VPP), AIN = –20 dBFS –143.2
NF Noise figure, ZS = 100 Ω Maximum full-scale voltage (VFS = 1.0 VPP), AIN = –20 dBFS 31.6 dB
Default full-scale voltage (VFS = 0.8 VPP), AIN = –20 dBFS 29.9
SNR Signal-to-noise ratio, excluding DC, HD2 to HD9, fS / 2, fS / 2 – fIN, fIN = 347 MHz AIN = –1 dBFS 48.8 dBFS
AIN = –3 dBFS 49
AIN = –12 dBFS 49.0
AIN = –3 dBFS, VFS = 1.0 VPP 49.1
fIN = 997 MHz AIN = –1 dBFS 48.7
AIN = –3 dBFS 48.9
AIN = –12 dBFS 49.0
fIN = 2397 MHz AIN = –1 dBFS 46.5 48.6
AIN = –3 dBFS 48.8
AIN = –12 dBFS 49.0
AIN = –3 dBFS, VFS = 1.0 VPP 49.0
fIN = 4197 MHz AIN = –1 dBFS 48.1
AIN = –3 dBFS 48.5
AIN = –12 dBFS 49.0
fIN = 5997 MHz AIN = –1 dBFS 47.7
AIN = –3 dBFS 48.2
AIN = –12 dBFS 48.9
fIN = 7597 MHz AIN = –1 dBFS 47.1
AIN = –3 dBFS 47.8
AIN = –12 dBFS 48.9
SINAD Signal-to-noise and distortion ratio, excluding DC and fS / 2 fixed spurs fIN = 347 MHz AIN = –1 dBFS 48.5 dBFS
AIN = –3 dBFS 48.8
AIN = –12 dBFS 48.9
AIN = –3 dBFS, VFS = 1.0 VPP 48.9
fIN = 997 MHz AIN = –1 dBFS 48.4
AIN = –3 dBFS 48.8
AIN = –12 dBFS 48.9
fIN = 2397 MHz AIN = –1 dBFS 45.5 48.4
AIN = –3 dBFS 48.7
AIN = –12 dBFS 48.9
AIN = –3 dBFS, VFS = 1.0 VPP 48.9
fIN = 4197 MHz AIN = –1 dBFS 47.6
AIN = –3 dBFS 48.2
AIN = –12 dBFS 48.8
fIN = 5997 MHz AIN = –1 dBFS 45.5
AIN = –3 dBFS 47.4
AIN = –12 dBFS 48.8
fIN = 7597 MHz AIN = –1 dBFS 45.8
AIN = –3 dBFS 47.4
AIN = –12 dBFS 48.7
ENOB Effective number of bits, excluding DC and fS / 2 fixed spurs fIN = 347 MHz AIN = –1 dBFS 7.8 bits
AIN = –3 dBFS 7.8
AIN = –12 dBFS 7.8
AIN = –3 dBFS, VFS = 1.0 VPP 7.8
fIN = 997 MHz AIN = –1 dBFS 7.7
AIN = –3 dBFS 7.8
AIN = -12 dBFS 7.9
fIN = 2397 MHz AIN = –1 dBFS 7.27 7.8
AIN = –3 dBFS 7.8
AIN = –12 dBFS 7.8
AIN = –3 dBFS, VFS = 1.0 VPP 7.8
fIN = 4197 MHz AIN = –1 dBFS 7.6
AIN = –3 dBFS 7.7
AIN = –12 dBFS 7.8
fIN = 5997 MHz AIN = –1 dBFS 7.3
AIN = –3 dBFS 7.6
AIN = –12 dBFS 7.8
fIN = 7597 MHz AIN = –1 dBFS 7.3
AIN = –3 dBFS 7.6
AIN = –12 dBFS 7.8
SFDR Spurious-free dynamic range, excluding DC and fS / 2 fixed spurs fIN = 347 MHz AIN = –1 dBFS 65 dBFS
AIN = –3 dBFS 68
AIN = –12 dBFS 68
AIN = –3 dBFS, VFS = 1.0 VPP 67
fIN = 997 MHz AIN = –1 dBFS 63
AIN = –3 dBFS 69
AIN = –12 dBFS 68
fIN = 2397 MHz AIN = –1 dBFS 52 67
AIN = –3 dBFS 69
AIN = –12 dBFS 69
AIN = –3 dBFS, VFS = 1.0 VPP 69
fIN = 4197 MHz AIN = –1 dBFS 59
AIN = –3 dBFS 63
AIN = –12 dBFS 68
fIN = 5997 MHz AIN = –1 dBFS 52
AIN = –3 dBFS 58
AIN = –12 dBFS 68
fIN = 7597 MHz AIN = –1 dBFS 53
AIN = –3 dBFS 61
AIN = –12 dBFS 69
HD2 2nd-order harmonic distortion fIN = 347 MHz AIN = –1 dBFS –74 dBFS
AIN = –3 dBFS –76
AIN = –12 dBFS –78
AIN = –3 dBFS, VFS = 1.0 VPP –75
fIN = 997 MHz AIN = –1 dBFS –74
AIN = –3 dBFS –76
AIN = –12 dBFS –75
fIN = 2397 MHz AIN = –1 dBFS –74 -55
AIN = –3 dBFS –74
AIN = –12 dBFS –78
AIN = –3 dBFS, VFS = 1.0 VPP –75
fIN = 4197 MHz AIN = –1 dBFS –61
AIN = –3 dBFS –65
AIN = –12 dBFS –77
fIN = 5997 MHz AIN = –1 dBFS –55
AIN = –3 dBFS –60
AIN = –12 dBFS –73
fIN = 7597 MHz AIN = –1 dBFS –64
AIN = –3 dBFS –69
AIN = –12 dBFS –75
HD3 3rd-order harmonic distortion fIN = 347 MHz AIN = –1 dBFS –66 dBFS
AIN = –3 dBFS –72
AIN = –12 dBFS –73
AIN = –3 dBFS, VFS = 1.0 VPP –70
fIN = 997 MHz AIN = –1 dBFS –63
AIN = –3 dBFS –79
AIN = –12 dBFS –75
fIN = 2397 MHz AIN = –1 dBFS –71 -55
AIN = –3 dBFS –72
AIN = –12 dBFS –80
AIN = –3 dBFS, VFS = 1.0 VPP –73
fIN = 4197 MHz AIN = –1 dBFS –65
AIN = –3 dBFS –65
AIN = –12 dBFS –75
fIN = 5997 MHz AIN = –1 dBFS –53
AIN = –3 dBFS –61
AIN = –12 dBFS –71
fIN = 7597 MHz AIN = –1 dBFS –53
AIN = –3 dBFS –62
AIN = –12 dBFS –87
fS / 2 – fIN fS / 2 – fIN input signal dependent interleaving spur fIN = 347 MHz AIN = –1 dBFS –73 dBFS
AIN = –3 dBFS –73
AIN = –12 dBFS –78
AIN = –3 dBFS, VFS = 1.0 VPP –73
fIN = 997 MHz AIN = –1 dBFS –69
AIN = –3 dBFS –71
AIN = –12 dBFS –79
fIN = 2397 MHz AIN = –1 dBFS –70 -52
AIN = –3 dBFS –74
AIN = –12 dBFS –75
AIN = –3 dBFS, VFS = 1.0 VPP –74
fIN = 4197 MHz AIN = –1 dBFS –67
AIN = –3 dBFS –68
AIN = –12 dBFS –74
fIN = 5997 MHz AIN = –1 dBFS –67
AIN = –3 dBFS –69
AIN = –12 dBFS –74
fIN = 7597 MHz AIN = –1 dBFS –62
AIN = –3 dBFS –64
AIN = –12 dBFS –72
fS / 2 fS / 2 fixed interleaving spur, independent of input signal AIN = –20 dBFS –76 -52 dBFS
SPUR Worst spur, excluding DC, HD2, HD3, fS / 2 and fS / 2 - fIN spurs fIN = 347 MHz AIN = –1 dBFS –70 dBFS
AIN = –3 dBFS –70
AIN = –12 dBFS –70
AIN = –3 dBFS, VFS = 1.0 VPP –70
fIN = 997 MHz AIN = –1 dBFS –68
AIN = –3 dBFS –71
AIN = –12 dBFS –68
fIN = 2397 MHz AIN = –1 dBFS –72 -60
AIN = –3 dBFS –72
AIN = –12 dBFS –70
AIN = –3 dBFS, VFS = 1.0 VPP –71
fIN = 4197 MHz AIN = –1 dBFS –69
AIN = –3 dBFS –71
AIN = –12 dBFS –69
fIN = 5997 MHz AIN = –1 dBFS –65
AIN = –3 dBFS –70
AIN = –12 dBFS –70
fIN = 7597 MHz AIN = –1 dBFS –69
AIN = –3 dBFS –71
AIN = –12 dBFS –70
IMD3 3rd-order intermodulation distortion f1 = 343 MHz,
f2 = 353 MHz		 AIN = –7 dBFS per tone –80 dBFS
AIN = –9 dBFS per tone –77
AIN = –18 dBFS per tone –77
AIN = –9 dBFS per tone, VFS = 1.0 VPP –79
f1 = 993 MHz,
f2 = 1003 MHz		 AIN = –7 dBFS per tone –80
AIN = –9 dBFS per tone –82
AIN = –18 dBFS per tone –73
f1 = 2393 MHz,
f2 = 2403 MHz		 AIN = –7 dBFS per tone –69
AIN = –9 dBFS per tone –70
AIN = –18 dBFS per tone –83
AIN = –9 dBFS per tone, VFS = 1.0 VPP –69
f1 = 4193 MHz,
f2 = 4203 MHz		 AIN = –7 dBFS per tone –67
AIN = –9 dBFS per tone –74
AIN = –18 dBFS per tone –73
f1 = 5993 MHz,
f2 = 6003 MHz		 AIN = –7 dBFS per tone –59
AIN = –9 dBFS per tone –66
AIN = –18 dBFS per tone –72
f1 = 7593 MHz,
f2 = 7603 MHz		 AIN = –7 dBFS per tone –46
AIN = –9 dBFS per tone –53
AIN = –18 dBFS per tone –79
(1) Full-power input bandwidth (FPBW) is defined as the input frequency where the reconstructed output of the ADC has dropped 3 dB below the power of a full-scale input signal at a low input frequency. Useable bandwidth may exceed the –3-dB, full-power input bandwidth.