SLASFA1 july   2023 AFE539F1-Q1

PRODUCTION DATA  

  1.   1
  2. 1 Features
  3. 2 Applications
  4. 3 Description
  5. 4 Revision History
  6. 5 Pin Configuration and Functions
  7. 6 Specifications
    1. 6.1  Absolute Maximum Ratings
    2. 6.2  ESD Ratings
    3. 6.3  Recommended Operating Conditions
    4. 6.4  Thermal Information
    5. 6.5  Electrical Characteristics: ADC Input
    6. 6.6  Electrical Characteristics: General
    7. 6.7  Timing Requirements: I2C Standard Mode
    8. 6.8  Timing Requirements: I2C Fast Mode
    9. 6.9  Timing Requirements: I2C Fast Mode Plus
    10. 6.10 Timing Requirements: SPI Write Operation
    11. 6.11 Timing Requirements: SPI Read and Daisy Chain Operation (FSDO = 0)
    12. 6.12 Timing Requirements: SPI Read and Daisy Chain Operation (FSDO = 1)
    13. 6.13 Timing Requirements: PWM Output
    14. 6.14 Timing Diagrams
    15. 6.15 Typical Characteristics
  8. 7 Detailed Description
    1. 7.1 Overview
    2. 7.2 Functional Block Diagram
    3. 7.3 Feature Description
      1. 7.3.1 Smart Analog Front End (AFE) Architecture
      2. 7.3.2 Programming Interface
      3. 7.3.3 Nonvolatile Memory (NVM)
        1. 7.3.3.1 NVM Cyclic Redundancy Check (CRC)
          1. 7.3.3.1.1 NVM-CRC-FAIL-USER Bit
          2. 7.3.3.1.2 NVM-CRC-FAIL-INT Bit
      4. 7.3.4 Power-On Reset (POR)
      5. 7.3.5 External Reset
      6. 7.3.6 Register-Map Lock
    4. 7.4 Device Functional Modes
      1. 7.4.1 Analog-to-Digital Converter (ADC) Mode
        1. 7.4.1.1 Voltage Reference Selection
          1. 7.4.1.1.1 Power-Supply as Reference
          2. 7.4.1.1.2 Internal Reference
          3. 7.4.1.1.3 External Reference
      2. 7.4.2 Pulse-Width Modulation (PWM) Mode
      3. 7.4.3 Constant Power-Dissipation Control
    5. 7.5 Programming
      1. 7.5.1 SPI Programming Mode
      2. 7.5.2 I2C Programming Mode
        1. 7.5.2.1 F/S Mode Protocol
        2. 7.5.2.2 I2C Update Sequence
          1. 7.5.2.2.1 Address Byte
          2. 7.5.2.2.2 Command Byte
        3. 7.5.2.3 I2C Read Sequence
    6. 7.6 Register Maps
      1. 7.6.1  NOP Register (address = 00h) [reset = 0000h]
      2. 7.6.2  REF-GAIN-CONFIG Register (address = 15h) [reset = 0401h]
      3. 7.6.3  COMMON-CONFIG Register (address = 1Fh) [reset = 13FFh]
      4. 7.6.4  COMMON-TRIGGER Register (address = 20h) [reset = 0000h]
      5. 7.6.5  COMMON-PWM-TRIG Register (address = 21h) [reset = 0001h]
      6. 7.6.6  GENERAL-STATUS Register (address = 22h) [reset = 00h, DEVICE-ID, VERSION-ID]
      7. 7.6.7  INTERFACE-CONFIG Register (address = 26h) [reset = 0000h]
      8. 7.6.8  STATE-MACHINE-CONFIG0 Register (address = 27h) [reset = 0003h]
      9. 7.6.9  SRAM-CONFIG Register (address = 2Bh) [reset = 0000h]
      10. 7.6.10 SRAM-DATA Register (address = 2Ch) [reset = 0000h]
      11. 7.6.11 MAX-OUTPUT Register (SRAM address = 20h) [reset = 007Fh]
      12. 7.6.12 MIN-OUTPUT Register (SRAM address = 21h) [reset = 0000h]
      13. 7.6.13 FUNCTION-COEFFICIENT Register (SRAM address = 22h) [reset = 01F4h]
      14. 7.6.14 PWM-FREQUENCY Register (SRAM address = 23h) [reset = 000Bh]
  9. 8 Application and Implementation
    1. 8.1 Application Information
    2. 8.2 Typical Application
      1. 8.2.1 Design Requirements
      2. 8.2.2 Detailed Design Procedure
      3. 8.2.3 Application Curve
    3. 8.3 Power Supply Recommendations
    4. 8.4 Layout
      1. 8.4.1 Layout Guidelines
      2. 8.4.2 Layout Example
  10. 9 Device and Documentation Support
    1. 9.1 Receiving Notification of Documentation Updates
    2. 9.2 Support Resources
    3. 9.3 Trademarks
    4. 9.4 Electrostatic Discharge Caution
    5. 9.5 Glossary
  11. 10Mechanical, Packaging, and Orderable Information

Package Options

Mechanical Data (Package|Pins)
Thermal pad, mechanical data (Package|Pins)
Orderable Information

7.6 Register Maps

Table 7-10 Register Map
REGISTER MOST SIGNIFICANT DATA BYTE (MSDB) LEAST SIGNIFICANT DATA BYTE (LSDB)
BIT15 BIT14 BIT13 BIT12 BIT11 BIT10 BIT9 BIT8 BIT7 BIT6 BIT5 BIT4 BIT3 BIT2 BIT1 BIT0
NOP NOP
REF-GAIN-CONFIG X REF-GAIN RESERVED
COMMON-CONFIG RESERVED DEV-LOCK RESERVED EN-INT-REF ADC-PDN RESERVED
COMMON-TRIGGER DEV-UNLOCK RESET RESERVED NVM-PROG NVM-RELOAD
COMMON-PWM-TRIG RESERVED START-FUNCTION
GENERAL-STATUS NVM-CRC-FAIL-INT NVM-CRC-FAIL-USER RESERVED NVM-BUSY DEVICE-ID VERSION-ID
INTERFACE-CONFIG X TIMEOUT-EN X FSDO-EN X SDO-EN
STATE-MACHINE-CONFIG0 RESERVED SM-ABORT SM-START SM-EN
SRAM-CONFIG X SRAM-ADDR
SRAM-DATA SRAM-DATA
MAX-OUTPUT RESERVED MAX-OUTPUT
MIN-OUTPUT RESERVED MIN-OUTPUT
FUNCTION-COEFFICIENT FUNCTION-COEFFICIENT
PWM-FREQUENCY RESERVED PWM-FREQ
Note: Shaded cells indicate the register bits or fields that are stored in NVM.
Note: X = Don't care.
Table 7-11 Register Names
I2C/SPI ADDRESS (COMMAND BYTE) SRAM ADDRESS REGISTER NAME SECTION
00h — NOP Section 7.6.1
15h — REF-GAIN-CONFIG Section 7.6.2
1Fh — COMMON-CONFIG Section 7.6.3
20h — COMMON-TRIGGER Section 7.6.4
21h — COMMON-PWM-TRIG Section 7.6.5
22h — GENERAL-STATUS Section 7.6.6
26h — INTERFACE-CONFIG Section 7.6.7
27h — STATE-MACHINE-CONFIG0 Section 7.6.8
2Bh — SRAM-CONFIG Section 7.6.9
2Ch — SRAM-DATA Section 7.6.10
— 20h MAX-OUTPUT Section 7.6.11
— 21h MIN-OUTPUT Section 7.6.12
— 22h FUNCTION-COEFFICIENT Section 7.6.13
— 23h PWM-FREQUENCY Section 7.6.14