Typical values at TA =
+25°C with nominal supplies. Unless otherwise noted, TX input data rate = 491.52
MSPS, fDAC = 11796.48 MSPS, interleave mode, AOUT = –1
dBFS, 1st Nyquist zone output, Internal PLL, fREF = 491.52
MSPS, 24x Interpolation, DSA = 0 dB, Sin(x)/x enabled, DSA calibrated
| Aout = -0.5 dFBS, 3.5 GHz Matching,
included PCB and cable losses |
|
Figure 6-444 TX
Output Power vs DSA Setting at 3.5 GHz
| 3.5
GHz Matching, included PCB and cable losses |
| Differential Gain Error = POUT(DSA Setting –
1) – POUT(DSA Setting) + 1 |
Figure 6-446 TX
Uncalibrated Differential Gain Error vs DSA Setting and Channel at 3.5
GHz
| 3.5
GHz Matching, included PCB and cable losses |
| Integrated Gain Error = POUT(DSA Setting) –
POUT(DSA Setting = 0) + (DSA
Setting) |
Figure 6-448 TX
Uncalibrated Integrated Gain Error vs DSA Setting and Channel at 3.5
GHz
| 3.5
GHz Matching, included PCB and cable losses |
| Differential Phase Error = PhaseOUT(DSA
Setting – 1) – PhaseOUT(DSA Setting) |
Figure 6-450 TX
Uncalibrated Differential Phase Error vs DSA Setting and Channel at 3.5
GHz
| 3.5
GHz Matching, included PCB and cable losses |
| Integrated Phase Error = Phase(DSA Setting) – Phase(DSA
Setting = 0) |
Figure 6-452 TX
Uncalibrated Integrated Phase Error vs DSA Setting and Channel at 3.5
GHz
| 3.5
GHz Matching, 1TX |
| Differential Phase Error = PhaseOUT(DSA
Setting – 1) – PhaseOUT(DSA Setting) |
Figure 6-454 TX
Uncalibrated Differential Gain Error vs DSA Setting and Temperature at 3.5
GHz
| 3.5
GHz Matching, 1TX |
| Integrated Phase Error = Phase(DSA Setting) – Phase(DSA
Setting = 0) |
Figure 6-456 TX
Uncalibrated Integrated Gain Error vs DSA Setting and Temperature at 3.5
GHz
| 3.5
GHz Matching, 1TX |
| Differential Phase Error = PhaseOUT(DSA
Setting – 1) – PhaseOUT(DSA Setting) |
Figure 6-458 TX
Uncalibrated Differential Phase Error vs DSA setting and Temperature at 3.5
GHz
| 3.5
GHz Matching, 1TX |
| Integrated Phase Error = Phase(DSA Setting) – Phase(DSA
Setting=0) |
Figure 6-460 TX
Uncalibrated Integrated Phase Error vs DSA Setting and Temperature at 3.5
GHz
A.
| fDAC = 11796.48 MSPS, interleave mode,
matching at 3.5 GHz, Aout = –13 dBFS. |
|
Figure 6-462 TX
NSD vs DSA Setting at 3.5 GHz
A.
| fDAC = 12 MSPS, external clock mode,
non-interleave mode |
|
Figure 6-464 TX
NSD vs Digital Amplitude and Channel at 3.75 GHz
| 20-MHz
tone spacing, 3.5 GHz Matching |
|
Figure 6-466 TX
IMD3 vs Digital Amplitude and Channel at 3.5 GHz
| 50-MHz
tone spacing, external clock mode, non-interleave
mode |
|
Figure 6-468 TX
IMD3 vs Tone Spacing and Channel at 3.75 GHz
| 50-MHz
tone spacing, external clock mode, non-interleave
mode |
|
Figure 6-470 TX
IMD3 vs Digital Amplitude and Dither at 3.75 GHz
| 3.5
GHz Matching, single carrier 20-MHz BW TM1.1 LTE |
Figure 6-472 TX
20-MHz LTE Output Spectrum at 3.5 GHz (Band 42)
| 3.5
GHz Matching, single carrier 100-MHz BW NR TM1.1 |
Figure 6-474 TX 2
carrier 100-MHz NR Output Spectrum at 3.45 GHz and 3.75 GHz
| 3.5
GHz Matching, single carrier 20-MHz BW TM1.1 LTE |
Figure 6-476 TX
20-MHz LTE alt-ACPR vs DSA Setting at 3.5 GHz
| 3.5
GHz Matching, single carrier 100-MHz BW NR TM1.1 |
Figure 6-478 TX
100-MHz NR alt-ACPR vs DSA Setting at 3.5 GHz
| 3.5
GHz Matching, single carrier 20-MHz BW TM1.1 LTE |
Figure 6-480 TX
20-MHz LTE alt-ACPR vs Digital Level at 3.5 GHz
| 3.5
GHz Matching, single carrier 100-MHz BW NR TM1.1 |
|
Figure 6-482 TX
100-MHz NR alt-ACPR vs Digital Level at 3.5 GHz
| Matching at 3.5 GHz, fDAC = 11.79648 GSPS,
interleave mode, normalized to output power at harmonic
frequency. Dip is due to HD3 falling near DC. |
Figure 6-484 TX
Single Tone HD3 vs Frequency and Digital Level at 3.5 GHz
| Matching at 3.5 GHz, fDAC = 11.79648 GSPS,
interleave mode. |
Figure 6-486 TX
Single Tone (–1 dBFS) Output Spectrum at 3.5 GHz (±300 MHz)
| Matching at 3.5 GHz, fDAC = 11.79648 GSPS,
interleave mode. |
Figure 6-488 TX
Single Tone (–6 dBFS) Output Spectrum at 3.5 GHz (±300 MHz)
| Matching at 3.5 GHz, fDAC = 11.79648 GSPS,
interleave mode. |
|
Figure 6-490 TX
Single Tone (–12 dBFS) Output Spectrum at 3.5 GHz (±300 MHz)
| Matching at 3.5 GHz, 50 MHz tone spacing,
fDAC = 12 GSPS, non-interleave
mode. |
|
Figure 6-492 TX
Dual Tone Output Spectrum at 3.75 GHz, -7 dBFS each (±600 MHz)
| Matching at 3.5 GHz, 50 MHz tone spacing,
fDAC = 12 GSPS, non-interleave
mode. |
|
Figure 6-494 TX
Dual Tone Output Spectrum at 3.75 GHz, -13 dBFS each (±600 MHz)
| Matching at 3.5 GHz, 50 MHz tone spacing,
fDAC = 12 GSPS, non-interleave
mode. |
|
Figure 6-496 TX
Dual Tone Output Spectrum at 3.75 GHz, -30 dBFS each (±600 MHz)
| Aout = -0.5 dFBS, 3.5 GHz Matching,
included PCB and cable losses |
|
|
Figure 6-445 TX
Output Power vs Frequency
| 3.5
GHz Matching, included PCB and cable losses |
| Differential Gain Error = POUT(DSA Setting –
1) – POUT(DSA Setting) + 1 |
Figure 6-447 TX
Calibrated Differential Gain Error vs DSA Setting and Channel at 3.5
GHz
| 3.5
GHz Matching, included PCB and cable losses |
| Integrated Gain Error = POUT(DSA Setting) –
POUT(DSA Setting = 0) + (DSA
Setting) |
Figure 6-449 TX
Calibrated Integrated Gain Error vs DSA Setting and Channel at 3.5
GHz
| 3.5
GHz Matching, included PCB and cable losses |
| Differential Phase Error = PhaseOUT(DSA
Setting – 1) – PhaseOUT(DSA Setting). Phase
DNL spike may occur at any DSA setting. |
Figure 6-451 TX
Calibrated Differential Phase Error vs DSA Setting and Channel at 3.5
GHz
| 3.5
GHz Matching, included PCB and cable losses |
| Integrated Phase Error = Phase(DSA Setting) – Phase(DSA
Setting = 0) |
Figure 6-453 TX
Calibrated Integrated Phase Error vs DSA Setting and Channel at 3.5
GHz
| 3.5
GHz Matching, 1TX, Calibrated at 25°C |
| Differential Phase Error = PhaseOUT(DSA
Setting – 1) – PhaseOUT(DSA Setting) |
Figure 6-455 TX
Calibrated Differential Gain Error vs DSA Setting and Temperature at 3.5
GHz
| 3.5
GHz Matching, 1TX, Calibrated at 25°C |
| Integrated Phase Error = Phase(DSA Setting) – Phase(DSA
Setting = 0) |
Figure 6-457 TX
Calibrated Integrated Gain Error vs DSA Setting and Temperature at 3.5
GHz
| 3.5
GHz Matching, 1TX, Calibrated at 25°C |
| Differential Phase Error = PhaseOUT(DSA
Setting – 1) – PhaseOUT(DSA Setting) |
Figure 6-459 TX
Calibrated Differential Phase Error vs DSA Setting and Temperature at 3.5
GHz
| 3.5
GHz Matching, 1TX, Calibrated at 25°C |
| Integrated Phase Error = Phase(DSA Setting) – Phase(DSA
Setting = 0) |
Figure 6-461 TX
Calibrated Integrated Phase Error vs DSA Setting and Temperature at 3.5
GHzA.
| fDAC = 12 MSPS, external clock mode,
non-interleave mode |
|
Figure 6-463 TX
NSD vs Digital Amplitude and Temperature at 3.75 GHz
| 20-MHz
tone spacing, 3.5 GHz Matching, –13 dBFS each tone,
included PCB and cable losses |
|
Figure 6-465 TX
IMD3 vs DSA Setting at 3.5 GHz
| 50-MHz
tone spacing, external clock mode, non-interleave
mode |
|
Figure 6-467 TX
IMD3 vs Tone Spacing and Amplitude at 3.75 GHz
| 50-MHz
tone spacing, external clock mode, non-interleave
mode |
|
Figure 6-469 TX
IMD3 vs Digital Amplitude and Temperature at 3.75 GHz
| Inband
= 3.75 GHz ± 600 MHz, fDAC = 9 GSPS, external
clock mode, non-interleave mode. |
|
Figure 6-471 Two
Tone Inband SFDR vs Digital Amplitude at 3.75 GHz
| 3.5
GHz Matching, single carrier 100-MHz BW NR TM1.1 |
Figure 6-473 TX
100-MHz NR Output Spectrum at 3.5 GHz (Band 42)
| 3.5
GHz Matching, single carrier 20-MHz BW TM1.1 LTE |
|
|
|
|
Figure 6-475 TX
20-MHz LTE ACPR vs DSA Setting at 3.5 GHz
| 3.5
GHz Matching, single carrier 100-MHz BW NR TM1.1 |
Figure 6-477 TX
100-MHz NR ACPR vs DSA Setting at 3.5 GHz
| 3.5
GHz Matching, single carrier 20-MHz BW TM1.1 LTE |
|
Figure 6-479 TX
20-MHz LTE ACPR vs Digital Level at 3.5 GHz
| 3.5
GHz Matching, single carrier 100-MHz BW NR TM1.1 |
Figure 6-481 TX
100-MHz NR ACPR vs Digital Level at 3.5 GHz
| Matching at 3.5 GHz, fDAC = 11.79648GSPS,
interleave mode, normalized to output power at harmonic
frequency |
Figure 6-483 TX
Single Tone HD2 vs Frequency and Digital Level at 3.5 GHz
| Matching at 3.5 GHz, fDAC = 11.79648 GSPS,
interleave mode. |
|
Figure 6-485 TX
Single Tone (–1 dBFS) Output Spectrum at 3.5 GHz (0 -
fDAC)
| Matching at 3.5 GHz, fDAC = 11.79648 GSPS,
interleave mode. |
Figure 6-487 TX
Single Tone (–6 dBFS) Output Spectrum at 3.5 GHz (0-fDAC)
| Matching at 3.5 GHz, fDAC = 11.79648 GSPS,
interleave mode. |
Figure 6-489 TX
Single Tone (–12 dBFS) Output Spectrum at 3.5 GHz
(0-fDAC)
| Matching at 3.5 GHz, 50MHz tone spacing,
fDAC = 12GSPS, non-interleave
mode. |
|
Figure 6-491 TX
Dual Tone Output Spectrum at 3.75 GHz, -7 dBFS each (0 -
fDAC)
| Matching at 3.5 GHz, 50 MHz tone spacing,
fDAC = 12 GSPS, non-interleave
mode. |
|
Figure 6-493 TX
Dual Tone Output Spectrum at 3.75 GHz, -13 dBFS each (0 -
fDAC)
| Matching at 3.5 GHz, 50 MHz tone spacing,
fDAC = 12 GSPS, non-interleave
mode. |
|
Figure 6-495 TX
Dual Tone Output Spectrum at 3.75 GHz, -30 dBFS each (0 -
fDAC)
| fDAC = fCLK = 12 GSPS,
non-interleave mode. |
|
Figure 6-497 External Clock Additive Phase Noise at 3.7 GHz