Typical values at TA = +25°C, ADC
Sampling Rate = 2949.12 GHz. Default conditions:
output sample rate = 491.52 MSPS (decimate by 6),
PLL clock mode with fREF = 491.52 MHz,
AIN = –3 dBFS, DSA setting = 4 dB.
With 0.8 GHz matching, normalized to 830 MHz |
|
Figure 6-50 RX In-Band Gain Flatness for Channel 1RX, fIN = 830 MHz
With 0.8 GHz matching, normalized to
phase at 25°C |
|
Figure 6-52 RX
Input Phase vs Temperature and DSA at
fOUT = 0.8 GHz
With 0.8 GHz matching |
Differential Amplitude Error =
PIN(DSA Setting – 1) –
PIN(DSA Setting) + 1 |
Figure 6-54 RX
Calibrated Differential Amplitude Error vs DSA
Setting at 0.8 GHz
With 0.8 GHz matching |
Integrated Amplitude Error =
PIN(DSA Setting) – PIN(DSA
Setting = 0) + (DSA Setting) |
Figure 6-56 RX
Calibrated Integrated Amplitude Error vs DSA
Setting at 2.6 GHz
With 0.8 GHz matching |
Differential Phase Error =
PhaseIN(DSA Setting – 1) –
PhaseIN(DSA Setting) |
Figure 6-58 RX
Calibrated Differential Phase Error vs DSA Setting
at 0.8 GHz
With 0.8 GHz matching |
Integrated Phase Error = Phase(DSA
Setting) – Phase(DSA Setting = 0) |
Figure 6-60 RX
Calibrated Integrated Phase Error vs DSA Setting
at 0.8 GHzWith 0.8 GHz matching, 12.5-MHz offset from tone |
Figure 6-62 RX Noise Spectral Density vs Temperature at 0.8 GHz
With 0.8 GHz matching, 12.5-MHz offset
from tone |
|
Figure 6-64 RX
Noise Spectral Density vs Input Amplitude and
Channel at 0.8 GHzWith 0.8 GHz matching, each tone –7 dBFS, tone spacing = 20 MHz |
Figure 6-66 RX IMD5 vs DSA Setting and Temperature at 0.8 GHzWith 0.8 GHz matching, tone spacing = 20 MHz, DSA = 12 dB |
Figure 6-68 RX IMD3 vs Input Level and Temperature at 0.8 GHz
With 0.8 GHz matching, measured after
HD2 trim, DDC bypass mode (TI only mode for
characterization) |
Figure 6-70 RX
HD2 vs DSA Setting and Channel at 0.8 GHzWith 0.8 GHz matching, measured after HD2 trim, DDC bypass mode (TI only mode for characterization) |
Figure 6-72 RX HD2 vs Input Level and Temperature at 0.8 GHzWith 0.8 GHz matching, DDC bypass mode (TI only mode for characterization) |
Figure 6-74 RX HD3 vs DSA Setting and Temperature at 0.8 GHzWith 0.8 GHz matching, DDC bypass mode (TI only mode for characterization) |
Figure 6-76 RX HD3 vs Input Level and Temperature at 0.8 GHz
With 0.8 GHz matching, –7 dBFS each
tone, 20-MHz tone spacing, all supplies at MIN,
TYP, or MAX recommended operating voltages |
Figure 6-78 RX
IMD3 vs Supply and Channel at 0.8 GHz
With 0.8 GHz matching, 12.5-MHz offset,
all supplies at MIN, TYP, or MAX recommended
operating voltages |
Figure 6-80 RX
Noise Spectral Density vs Supply and Channel at
0.8 GHz
With 0.8 GHz matching, normalized to
fullscale at 25°C for each channel |
Figure 6-51 RX
Input Fullscale vs Temperature and Channel at 800
MHz
With 0.8 GHz matching |
Differential Amplitude Error =
PIN(DSA Setting – 1) –
PIN(DSA Setting) + 1 |
Figure 6-53 RX
Uncalibrated Differential Amplitude Error vs DSA
Setting at 0.8 GHz
With 0.8 GHz matching |
Integrated Amplitude Error =
PIN(DSA Setting) – PIN(DSA
Setting = 0) + (DSA Setting) |
Figure 6-55 RX
Uncalibrated Integrated Amplitude Error vs DSA
Setting at 0.8 GHz
With 0.8 GHz matching |
Differential Phase Error =
PhaseIN(DSA Setting – 1) –
PhaseIN(DSA Setting) |
Figure 6-57 RX
Uncalibrated Differential Phase Error vs DSA
Setting at 0.8 GHz
With 0.8 GHz matching |
Integrated Phase Error = Phase(DSA
Setting) – Phase(DSA Setting = 0) |
Figure 6-59 RX
Uncalibrated Integrated Phase Error vs DSA Setting
at 0.8 GHzWith 0.8 GHz matching, fIN = 840 MHz, AIN= –3 dBFS |
Figure 6-61 RX Output FFT at 0.8 GHzWith 0.8 GHz matching, DSA Setting = 12 dB, 12.5-MHz offset from tone |
Figure 6-63 RX Noise Spectral Density vs Input Amplitude and Temperature at 0.8 GHzA. With 0.8 GHz matching, each tone –7 dBFS, tone spacing = 20 MHz |
Figure 6-65 RX IMD3 vs DSA Setting and Temperature at 0.8 GHzWith 0.8 GHz matching, tone spacing = 20 MHz, DSA = 4 dB |
Figure 6-67 RX IMD3 vs Input Level and Temperature at 0.8 GHzWith 0.8 GHz matching, tone spacing = 20 MHz, DSA = 12 dB |
Figure 6-69 RX IMD5 vs Input Level and Temperature at 0.8 GHzWith 0.8 GHz matching, measured after HD2 trim, DDC bypass mode (TI only mode for characterization) |
Figure 6-71 RX HD2 vs DSA Setting and Temperature at 0.8 GHz
With 0.8 GHz matching, DDC bypass mode
(TI only mode for characterization) |
Figure 6-73 RX
HD3 vs DSA Setting and Channel at 0.8 GHz
With 0.8 GHz matching, DDC bypass mode
(TI only mode for characterization) |
Figure 6-75 RX
HD3 vs Input Level and Channel at 0.8 GHzFigure 6-77 RX
Non-HD2/3 vs DSA Setting at 0.8 GHz
With 0.8 GHz matching, –7 dBFS each
tone, 20-MHz tone spacing, all supplies at MIN,
TYP, or MAX recommended operating voltages |
Figure 6-79 RX
IMD5 vs Supply and Channel at 0.8 GHz