Typical values at TA = +25°C with
nominal supplies. Default conditions: TX input data rate = 1474.56MSPS,
fDAC = 11796.48MSPS (8x interpolation), Mixed mode, 1st
Nyquist zone output, PLL clock mode with fREF = 491.52MHz,
AOUT = –1dBFS, DSA = 0dB, Sin(x)/x enabled, DSA calibrated, 9.6GHz
matching
| Includes PCB and cable losses. |
Figure 4-233 TX
Output Power vs Frequency at 9.61GHz
| Includes PCB and cable losses. |
Figure 4-235 TX
Output Power vs DSA Setting at 9.61GHz
Figure 4-237 TX
DSA Calibrated Amplitude Differential Nonlinearity
Figure 4-239 TX
DSA Calibrated Amplitude Differential Nonlinearity
Figure 4-241 TX
DSA Calibrated Amplitude Integrated Nonlinearity
Figure 4-243 TX
DSA Calibrated Amplitude Integrated Nonlinearity
Figure 4-245 TX
DSA Calibrated Phase Differential Nonlinearity
Figure 4-247 TX
DSA Calibrated Phase Differential NonlinearityFigure 4-249 TX
DSA Calibrated Phase Integrated Nonlinearity 
Figure 4-251 TX
DSA Calibrated Amplitude Integrated Nonlinearity
Figure 4-253 TX
IMD3 vs Digital Amplitude at 9.61GHz
Figure 4-255 TX
IMD3 vs DSA Setting at 9.61GHz
Figure 4-257 TX
IMD3 vs Tone Spacing at 9.61GHz
Figure 4-259 TX
IMD3 vs Tone Spacing at 9.61GHz
Figure 4-261 TX
NSD vs Digital Amplitude at 9.61GHz
Figure 4-263 TX
NSD vs DSA Setting at 9.61GHz
Figure 4-265 TX
2-tone SFDR vs Digital Amplitude at 9.61GHz
| Includes PCB and cable losses. |
Figure 4-267 TX
Single Tone Spectrum at 9.61GHz and -1dBFS (1.2GHz BW)
| Includes PCB and cable losses. |
Figure 4-269 TX
Single Tone Spectrum at 9.61GHz and -6dBFS (1.2GHz BW)
| Includes PCB and cable losses. |
Figure 4-271 TX
Single Tone Spectrum at 9.61GHz and -12dBFS (1.2GHz BW)
| Includes PCB and cable losses, 50MHz tone
spacing. |
Figure 4-273 TX
2-Tone Spectrum at 9.61GHz and -7dBFS (1.2GHz BW)
| Includes PCB and cable losses, 50MHz tone
spacing. |
Figure 4-275 TX
2-Tone Spectrum at 9.61GHz and -13dBFS (1.2GHz BW)
| Includes PCB and cable losses, 50MHz tone
spacing. |
Figure 4-277 TX
2-Tone Spectrum at 9.61GHz and -30dBFS Each (1.2GHz BW)
| Includes PCB and cable losses, 50MHz tone
spacing. |
Figure 4-279 TX
2-Tone Spectrum at 9.61GHz and -60dBFS Each (1.2GHz BW)
Figure 4-281 TX
NR100MHz ACPR vs DSA Setting at 9.61GHzTX NR100MHz alt-ACPR vs DSA Setting
at 9.61GHz
| Includes PCB and cable losses. |
Figure 4-234 TX
Output Power vs Frequency at 9.61GHz
Figure 4-236 TX
DSA Uncalibrated Amplitude Differential Nonlinearity
Figure 4-238 TX
DSA Uncalibrated Amplitude Differential Nonlinearity
Figure 4-240 TX
DSA Uncalibrated Amplitude Integrated Nonlinearity
Figure 4-242 TX
DSA Uncalibrated Amplitude Integrated Nonlinearity
Figure 4-244 TX
DSA Uncalibrated Phase Differential Nonlinearity
Figure 4-246 TX
DSA Uncalibrated Phase Differential Nonlinearity
Figure 4-248 TX
DSA Uncalibrated Phase Integrated Nonlinearity
Figure 4-250 TX
DSA Uncalibrated Phase Integrated Nonlinearity
Figure 4-252 TX
IMD3 vs Digital Amplitude at 9.61GHzFigure 4-254 TX
IMD3 vs DSA Setting at 9.61GHz 
Figure 4-256 TX
IMD3 vs DSA Setting at 9.61GHz
Figure 4-258 TX
IMD3 vs Tone Spacing at 9.61GHz
Figure 4-260 TX
NSD vs Digital Amplitude at 9.61GHz
Figure 4-262 TX
NSD vs DSA Setting at 9.61GHz
Figure 4-264 TX
NSD vs DSA Setting at 9.61GHz
| Includes PCB and cable losses. |
Figure 4-266 TX
Single Tone Spectrum at 9.61GHz and -1dBFS (wideband)
| Includes PCB and cable losses. |
Figure 4-268 TX
Single Tone Spectrum at 9.61GHz and -6dBFS (wideband)
| Includes PCB and cable losses. |
Figure 4-270 TX
Single Tone Spectrum at 9.61GHz and -12dBFS (wideband)
| Includes PCB and cable losses, 50MHz tone
spacing. |
Figure 4-272 TX
2-Tone Spectrum at 9.61GHz and -7dBFS (wideband)
| Includes PCB and cable losses, 50MHz tone
spacing. |
Figure 4-274 TX
2-Tone Spectrum at 9.61GHz and -13dBFS (wideband)
| Includes PCB and cable losses, 50MHz tone
spacing. |
Figure 4-276 TX
2-Tone Spectrum at 9.61GHz and -30dBFS Each (wideband)
| Includes PCB and cable losses, 50MHz tone
spacing. |
Figure 4-278 TX
2-Tone Spectrum at 9.61GHz and -60dBFS Each (wideband)
| Single
sideband, external clock mode, input clock phase noise
removed |
Figure 4-280 TX
Additive Phase Noise vs Offset Frequency at 9.61GHz
Figure 4-282 TX
NR100MHz EVM vs DSA Setting at 9.61GHz
