SLASF63 june   2023 DAC539E4W

PRODUCTION DATA  

  1.   1
  2. 1 Features
  3. 2 Applications
  4. 3 Description
  5. 4 Revision History
  6. 5 Pin Configuration and Functions
  7. 6 Specifications
    1. 6.1  Absolute Maximum Ratings
    2. 6.2  ESD Ratings
    3. 6.3  Recommended Operating Conditions
    4. 6.4  Thermal Information
    5. 6.5  Electrical Characteristics: Threshold DAC
    6. 6.6  Electrical Characteristics: Comparator
    7. 6.7  Electrical Characteristics: General
    8. 6.8  Timing Requirements: I2C Standard Mode
    9. 6.9  Timing Requirements: I2C Fast Mode
    10. 6.10 Timing Requirements: I2C Fast Mode Plus
    11. 6.11 Timing Requirements: SPI Write Operation
    12. 6.12 Timing Requirements: SPI Read and Daisy Chain Operation (FSDO = 0)
    13. 6.13 Timing Requirements: SPI Read and Daisy Chain Operation (FSDO = 1)
    14. 6.14 Timing Diagrams
    15. 6.15 Typical Characteristics
  8. 7 Detailed Description
    1. 7.1 Overview
    2. 7.2 Functional Block Diagram
    3. 7.3 Feature Description
      1. 7.3.1 Smart Digital-to-Analog Converter (DAC) Architecture
      2. 7.3.2 Threshold DAC
        1. 7.3.2.1 Voltage Reference and DAC Transfer Function
          1. 7.3.2.1.1 Power-Supply as Reference
          2. 7.3.2.1.2 Internal Reference
          3. 7.3.2.1.3 External Reference
      3. 7.3.3 Look-Up Table (LUT)
      4. 7.3.4 Programming Interface
      5. 7.3.5 Nonvolatile Memory (NVM)
        1. 7.3.5.1 NVM Cyclic Redundancy Check (CRC)
          1. 7.3.5.1.1 NVM-CRC-FAIL-USER Bit
          2. 7.3.5.1.2 NVM-CRC-FAIL-INT Bit
      6. 7.3.6 Power-On Reset (POR)
      7. 7.3.7 External Reset
      8. 7.3.8 Register-Map Lock
    4. 7.4 Device Functional Modes
      1. 7.4.1 Comparator Mode
        1. 7.4.1.1 Programmable Hysteresis Comparator
      2. 7.4.2 Power-Down Mode
    5. 7.5 Programming
      1. 7.5.1 SPI Programming Mode
      2. 7.5.2 I2C Programming Mode
        1. 7.5.2.1 F/S Mode Protocol
        2. 7.5.2.2 I2C Update Sequence
          1. 7.5.2.2.1 Address Byte
          2. 7.5.2.2.2 Command Byte
        3. 7.5.2.3 I2C Read Sequence
    6. 7.6 Register Maps
      1. 7.6.1  NOP Register (address = 00h) [reset = 0000h]
      2. 7.6.2  DAC-x-MARGIN-HIGH Register (address = 01h, 07h, 0Dh, 13h) [reset = 0000h]
      3. 7.6.3  DAC-x-MARGIN-LOW Register (address = 02h, 08h, 0Eh, 14h) [reset = 0000h]
      4. 7.6.4  DAC-x-VOUT-CMP-CONFIG Register (address = 03h, 09h, 0Fh, 15h) [reset = 0401h]
      5. 7.6.5  DAC-x-CMP-MODE-CONFIG Register (address = 05h, 0Bh, 11h, 17h) [reset = 0000h]
      6. 7.6.6  COMMON-CONFIG Register (address = 1Fh) [reset = 1249h]
      7. 7.6.7  COMMON-TRIGGER Register (address = 20h) [reset = 0000h]
      8. 7.6.8  COMMON-DAC-TRIG Register (address = 21h) [reset = 0000h]
      9. 7.6.9  GENERAL-STATUS Register (address = 22h) [reset = 00h, DEVICE-ID, VERSION-ID]
      10. 7.6.10 CMP-STATUS Register (address = 23h) [reset = 0000h]
      11. 7.6.11 DEVICE-MODE-CONFIG Register (address = 25h) [reset = 8040h]
      12. 7.6.12 INTERFACE-CONFIG Register (address = 26h) [reset = 0000h]
      13. 7.6.13 STATE-MACHINE-CONFIG0 Register (address = 27h) [reset = 0003h]
      14. 7.6.14 SRAM-CONFIG Register (address = 2Bh) [reset = 0000h]
      15. 7.6.15 SRAM-DATA Register (address = 2Ch) [reset = 0000h]
      16. 7.6.16 DAC-x-DATA Register (SRAM address = 21h, 22h, 23h, 24h) [reset = 8000h]
      17. 7.6.17 LUT-x-DATA Register (SRAM address = 25h through 34h) [reset = (see register description)]
      18. 7.6.18 LOOP-WAIT Register (SRAM address = 35h) [reset = 0000h]
  9. 8 Application and Implementation
    1. 8.1 Application Information
    2. 8.2 Typical Application
      1. 8.2.1 Design Requirements
      2. 8.2.2 Detailed Design Procedure
      3. 8.2.3 Application Curve
    3. 8.3 Power Supply Recommendations
    4. 8.4 Layout
      1. 8.4.1 Layout Guidelines
      2. 8.4.2 Layout Example
  10. 9 Device and Documentation Support
    1. 9.1 Receiving Notification of Documentation Updates
    2. 9.2 Support Resources
    3. 9.3 Trademarks
    4. 9.4 Electrostatic Discharge Caution
    5. 9.5 Glossary
  11. 10Mechanical, Packaging, and Orderable Information

Package Options

Refer to the PDF data sheet for device specific package drawings

Mechanical Data (Package|Pins)
  • YBH|16
Thermal pad, mechanical data (Package|Pins)
Orderable Information

7.5.2.2 I2C Update Sequence

For a single update, the DAC539E4W requires a start condition, a valid I2C address byte, a command byte, and two data bytes, as listed in Table 7-10.
Table 7-10 Update Sequence
MSB .... LSB ACK MSB ... LSB ACK MSB ... LSB ACK MSB ... LSB ACK
Address (A) byte
Section 7.5.2.2.1		 Command byte
Section 7.5.2.2.2		 Data byte - MSDB Data byte - LSDB
DB [31:24] DB [23:16] DB [15:8] DB [7:0]

After each byte is received, the DAC539E4W acknowledges the byte by pulling the SDA line low during the high period of a single clock pulse, as shown in Figure 7-16. These four bytes and acknowledge cycles make up the 36 clock cycles required for a single update to occur. A valid I2C address byte selects the DAC539E4W.

GUID-20211130-SS0I-CHTQ-XQBS-9370VGTQXRJP-low.svg Figure 7-16 I2C Bus Protocol

The command byte sets the operating mode of the selected DAC539E4W device. For a data update to occur when the operating mode is selected by this byte, the DAC539E4W device must receive two data bytes: the most significant data byte (MSDB) and least significant data byte (LSDB). The DAC539E4W device performs an update on the falling edge of the acknowledge signal that follows the LSDB.

When using fast mode (clock = 400 kHz), the maximum DAC update rate is limited to 10 kSPS. Using fast mode plus (clock = 1 MHz), the maximum DAC update rate is limited to 25 kSPS. When a stop condition is received, the DAC539E4W device releases the I2C bus and awaits a new start condition.