SLOS861C March   2015  – January 2023 DRV2700

PRODUCTION DATA  

  1. 1 Features
  2. 2 Applications
  3. 3 Description
  4. 4 Revision History
  5. 5 Pin Configuration and Functions
  6. 6 Specifications
    1. 6.1 Absolute Maximum Ratings
    2. 6.2 ESD Ratings
    3. 6.3 Recommended Operating Conditions
    4. 6.4 Thermal Information
    5. 6.5 Electrical Characteristics
    6. 6.6 Switching Characteristics
    7. 6.7 Typical characteristics
  7. 7 Detailed Description
    1. 7.1 Overview
    2. 7.2 Functional Block Diagram
    3. 7.3 Feature Description
      1. 7.3.1 Boost Converter and Control Loop
      2. 7.3.2 High-Voltage Amplifier
      3. 7.3.3 Fast Start-Up (Enable Pin)
      4. 7.3.4 Gain Control
      5. 7.3.5 Adjustable Boost Voltage
      6. 7.3.6 Adjustable Boost Current-Limit
      7. 7.3.7 Internal Charge Pump
      8. 7.3.8 Thermal Shutdown
    4. 7.4 Device Functional Modes
      1. 7.4.1 Boost + Amplifier Mode
      2. 7.4.2 Flyback Mode
  8. 8 Application and Implementation
    1. 8.1 Application Information
    2. 8.2 Typical Applications
      1. 8.2.1 AC-Coupled DAC Input Application
        1. 8.2.1.1 Design Requirements
        2. 8.2.1.2 Detailed Design Procedure
          1. 8.2.1.2.1  Piezo Load Selection
          2. 8.2.1.2.2  Programming The Boost Voltage
          3. 8.2.1.2.3  Inductor and Transformer Selection
          4. 8.2.1.2.4  Programing the Boost and Flyback Current-Limit
          5. 8.2.1.2.5  Boost Capacitor Selection
          6. 8.2.1.2.6  Pulldown FET and Resistors
          7. 8.2.1.2.7  Low-Voltage Operation
          8. 8.2.1.2.8  Current Consumption Calculation
          9. 8.2.1.2.9  Input Filter Considerations
          10. 8.2.1.2.10 Output Limiting Factors
          11. 8.2.1.2.11 Startup and Shutdown Sequencing
        3. 8.2.1.3 Application Curves
      2. 8.2.2 Filtered AC Coupled Single-Ended PWM Input Application
      3. 8.2.3 DC-Coupled DAC Input Application
      4. 8.2.4 DC-Coupled Reference Input Application
      5. 8.2.5 Flyback Circuit
    3. 8.3 System Example
  9. 9 Power Supply Recommendations
  10. 10Layout
    1. 10.1 Layout Guidelines
      1. 10.1.1 Boost + Amplifier Configuration Layout Considerations
      2. 10.1.2 Flyback Configuration Layout Considerations
    2. 10.2 Layout Example
  11. 11Device and Documentation Support
    1. 11.1 Documentation Support
      1. 11.1.1 Related Documentation
    2. 11.2 Trademarks
  12. 12Mechanical, Packaging, and Orderable Information

Package Options

Refer to the PDF data sheet for device specific package drawings

Mechanical Data (Package|Pins)
  • RGP|20
Thermal pad, mechanical data (Package|Pins)
Orderable Information
8.2.1.2.7 Low-Voltage Operation

The lowest gain setting is optimized for 50 VPP with a boost voltage of 30 V. Some applications may not require 50 VPP, therefore the designer may choose to program the boost converter as low as 15 V to improve efficiency. When using boost voltages lower than 30 V, consider using a boost capacitor and adjusting the full-scale input range First, to reduce boost ripple to an acceptable level, a 50-V rated, 0.22-µF boost capacitor is recommended. Second, the full-scale input range may require adjustment to avoid clipping. Generally, a 1.8-V single-ended PWM signal provides 50 VPP at the lowest gain. For example, if the boost voltage is set to 25 V for a 40 VPP full-scale output signal, the full-scale input range drops to 1.44 V for single-ended PWM inputs. An input voltage divider may be desired in this case if a 1.8-V I/O is used as a PWM source.