SNVSCD0B November   2023  – September 2024 LP5810

PRODUCTION DATA  

  1.   1
  2. 1 Features
  3. 2 Applications
  4. 3 Description
  5. 4 Device Comparison
  6. 5 Specifications
    1. 5.1 Absolute Maximum Ratings
    2. 5.2 ESD Ratings
    3. 5.3 Recommended Operating Conditions
    4. 5.4 Thermal Information
    5. 5.5 Electrical Characteristics
    6. 5.6 Timing Requirements
    7. 5.7 Typical Characteristics
  7. 6 Detailed Description
    1. 6.1 Overview
    2. 6.2 Functional Block Diagram
    3. 6.3 Feature Description
      1. 6.3.1 Analog Dimming
      2. 6.3.2 PWM Dimming
      3. 6.3.3 Autonomous Animation Engine Control
        1. 6.3.3.1 Animation Engine Pattern
        2. 6.3.3.2 Sloper
        3. 6.3.3.3 Animation Engine Unit (AEU)
        4. 6.3.3.4 Animation Pause Unit (APU)
      4. 6.3.4 Protections and Diagnostics
        1. 6.3.4.1 LED Open Detections
        2. 6.3.4.2 LED Short Detections
        3. 6.3.4.3 Thermal Shutdown
    4. 6.4 Device Functional Modes
    5. 6.5 Programming
      1. 6.5.1 I2C Data Transactions
      2. 6.5.2 I2C Data Format
  8. 7 Register Maps
  9. 8 Application and Implementation
    1. 8.1 Application Information
    2. 8.2 Typical Application
      1. 8.2.1 Application
      2. 8.2.2 Design Parameters
      3. 8.2.3 Detailed Design Procedure
        1. 8.2.3.1 Input Capacitor Selection
        2. 8.2.3.2 Program Procedure
        3. 8.2.3.3 Programming Example
      4. 8.2.4 Application Performance Plots
    3. 8.3 Power Supply Recommendations
    4. 8.4 Layout
      1. 8.4.1 Layout Guidelines
      2. 8.4.2 Layout Example
  10. 9 Device and Documentation Support
    1. 9.1 Documentation Support
    2. 9.2 Receiving Notification of Documentation Updates
    3. 9.3 Support Resources
    4. 9.4 Trademarks
    5. 9.5 Electrostatic Discharge Caution
    6. 9.6 Glossary
  11. 10Revision History
  12. 11Mechanical, Packaging, and Orderable Information

Package Options

Mechanical Data (Package|Pins)
Thermal pad, mechanical data (Package|Pins)
Orderable Information

5.5 Electrical Characteristics

Unless specified otherwise, typical characteristics apply over the full ambient temperature range (–40°C < TA < +85°C ), VIN = 3.6 V, VOUT = 5 V, CIN = 1 μF, COUT = 1 μF.
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
Power Supply
VCC Input voltage range 2.5 5.5 V
VCC_UVLO Under-voltage lockout threshold VCC rising 2.4 2.5 V
Under-voltage lockout threshold VCC falling 2.1 2.2 V
ISTB Standby current into VCC pin CHIP_EN = 0 (bit), VCC = 3.6 V 25 28 μA
INOR Normal operation current into VCC pin CHIP_EN = 1 (bit), VCC = 5V, IOUT0 = IOUT1 = IOUT2 = IOUT3 = 25.5 mA (MC = 0, DC = 255, PWM = 255) 0.4 0.6 mA
LED Driver Output
ICS Constant current sink output range VCC = 3.6 V, MC = 0, manual_pwm_x = FFh (100% ON) 0.1 25.5 mA
VCC = 3.6 V, MC = 1, manual_pwm_x = FFh (100% ON) 0.2 51 mA
ICS_LKG Constant current sink leakage current VCC = 3.6 V, OUTx = 1 V, manual_pwm_x = 0 (0%) 0.1 1 μA
IERR_D2D Device to device current error, 
IERR_D2D = (IAVE-ISET)/ISET×100%		 All LEDs turn ON. Current set to 0.1 mA (max_current = 0, manual_dc_x = 01h, manual_pwm_x = FFh) –5 5 %
All LEDs turn ON. Current set to 0.2 mA (max_current = 1, manual_dc_x = 01h, manual_pwm_x = FFh) –3 3 %
All LEDs turn ON. Current set to 1 mA (max_current = 0, manual_dc_x = 0Ah, manual_pwm_x = FFh) –5 5 %
All LEDs turn ON. Current set to 1 mA (max_current = 1, manual_dc_x = 05h, manual_pwm_x = FFh) –3 3 %
All LEDs turn ON. Current set to 25.5 mA (max_current = 0, manual_dc_x = FFh, manual_pwm_x = FFh) –5 5 %
All LEDs turn ON. Current set to 51 mA (max_current = 1, manual_dc_x = FFh, manual_pwm_x = FFh) –3 3 %
IERR_C2C Channel to Channel current error
IERR_C2C = (IOUTX-IAVE)/IAVE×100%		 All LEDs turn ON. Current set to 0.1 mA (max_current = 0, manual_dc_x = 01h, manual_pwm_x = FFh) –5 5 %
All LEDs turn ON. Current set to 0.2 mA (max_current = 1, manual_dc_x = 01h, manual_pwm_x = FFh) –3 3 %
All LEDs turn ON. Current set to 1 mA (max_current = 0, manual_dc_x = 0Ah, manual_pwm_x = FFh) –5 5 %
All LEDs turn ON. Current set to 1 mA (max_current = 1, manual_dc_x = 05h, manual_pwm_x = FFh) –3 3 %
All LEDs turn ON. Current set to 25.5 mA (max_current = 0, manual_dc_x = FFh, manual_pwm_x = FFh) –5 5 %
All LEDs turn ON. Current set to 51 mA (max_current = 1, manual_dc_x = FFh, manual_pwm_x = FFh) –3 3 %
VHR LED driver output hearroom voltage All LEDs turn ON. Current set to 25.5 mA (max_current = 0, manual_dc_x = FFh) 0.11 0.15 V
All LEDs turn ON. Current set to 51 mA (max_current = 1, manual_dc_x = FFh) 0.21 0.28 V
fLED_PWM LED PWM frequency pwm_fre = 0 24 kHz
pwm_fre = 1 12 kHz
fOSC Internal oscillator frequency vsync_out_en = 1 6 MHz
Logic Interface
VEN_H EN logic high  VCC > 1.8 V 1.2 V
VEN_L EN logic low  VCC > 1.8 V 0.35 V
VIH_LOGIC High level input voltage of SDA, SCL, SYNC 1.4 V
VIL_LOGIC Low level input voltage of SDA, SCL, SYNC 0.4 V
VOH_LOGIC High level output voltage of SYNC VCC - 0.2 V
VOL_LOGIC Low level output voltage of SDA, SYNC 0.4 V
Protection
TSD Thermal shutdown threshold for LED driver part TJ rising 150 °C
Thermal shutdown threshold for Boost converter part TJ rising 155 °C
TSD_HYS Thermal shutdown hysteresis TJ falling below TSD 15 °C
VLOD_TH LED open detection threshold Current set to 25.5 mA (max_current = 0, manual_dc_x = FFh) 70 90 110 mV
Current set to 51 mA (max_current = 1, manual_dc_x = FFh) 150 180 220 mV
VLSD_TH LED short detection threshold lsd_th = 00h 0.32 × VCC 0.35 × VCC 0.38 × VCC V
lsd_th = 01h 0.42 × VCC 0.45 × VCC 0.48 × VCC V
lsd_th = 10h 0.52 × VCC 0.55 × VCC 0.58 × VCC V
lsd_th = 11h 0.62 × VCC 0.65 × VCC 0.68 × VCC V