SBOS293I December   2003  – October 2024 OPA695

PRODUCTION DATA  

  1.   1
  2. 1 Features
  3. 2 Applications
  4. 3 Description
  5. 4 Pin Configuration and Functions
  6. 5 Specifications
    1. 5.1  Absolute Maximum Ratings
    2. 5.2  ESD Ratings
    3. 5.3  Recommended Operating Conditions
    4. 5.4  Thermal Information
    5. 5.5  Electrical Characteristics VS = ±5 V, OPA695ID, OPA695IDBV
    6. 5.6  Electrical Characteristics VS = 5 V, OPA695ID, OPA695IDBV
    7. 5.7  Electrical Characteristics VS = ±5 V, OPA695IDGK
    8. 5.8  Electrical Characteristics VS = 5 V, OPA695IDGK
    9. 5.9  Typical Characteristics: VS = ±5 V, OPA695IDBV, OPA695ID
    10. 5.10 Typical Characteristics: VS = 5 V, OPA695IDBV, OPA695ID
    11. 5.11 Typical Characteristics: VS = ±5 V, OPA695IDGK
    12. 5.12 Typical Characteristics: VS = 5 V, OPA695IDGK
  7. 6 Detailed Description
    1. 6.1 Overview
    2. 6.2 Functional Block Diagram
    3. 6.3 Feature Description
      1. 6.3.1 Wideband Current-Feedback Operation
      2. 6.3.2 Input and ESD Protection
    4. 6.4 Device Functional Modes
  8. 7 Application and Implementation
    1. 7.1 Application Information
      1. 7.1.1 Operating Suggestions
        1. 7.1.1.1 Setting Resistor Values to Optimize Bandwidth
        2. 7.1.1.2 Output Current and Voltage
        3. 7.1.1.3 Driving Capacitive Loads
        4. 7.1.1.4 Distortion Performance
        5. 7.1.1.5 Noise Performance
        6. 7.1.1.6 Thermal Analysis
      2. 7.1.2 LO Buffer Amplifier
      3. 7.1.3 Wideband Cable Driving Applications
        1. 7.1.3.1 Cable Modem Return Path Driver
        2. 7.1.3.2 Arbitrary Waveform Driver
      4. 7.1.4 Differential I/O Applications
    2. 7.2 Typical Application
      1. 7.2.1 Design Requirements
        1. 7.2.1.1 Saw Filter Buffer
      2. 7.2.2 Detailed Design Procedure
      3. 7.2.3 Application Curve
    3. 7.3 Power Supply Recommendations
    4. 7.4 Layout
      1. 7.4.1 Layout Guidelines
      2. 7.4.2 Layout Example
  9. 8 Device and Documentation Support
    1. 8.1 Device Support
      1. 8.1.1 Design-In Tools
        1. 8.1.1.1 Demonstration Fixtures
    2. 8.2 Documentation Support
      1. 8.2.1 Related Documentation
    3. 8.3 Receiving Notification of Documentation Updates
    4. 8.4 Support Resources
    5. 8.5 Trademarks
    6. 8.6 Electrostatic Discharge Caution
    7. 8.7 Glossary
  10. 9 Revision History
  11. 10Mechanical, Packaging, and Orderable Information

Package Options

Refer to the PDF data sheet for device specific package drawings

Mechanical Data (Package|Pins)
  • D|8
  • DBV|6
  • DGK|8
Thermal pad, mechanical data (Package|Pins)
Orderable Information

9 Revision History

Changes from Revision H (April 2015) to Revision I (October 2024)

  • Updated the numbering format for tables, figures, and cross-references throughout the documentGo
  • Changed the supply voltage specification from ±6.5 V to 13 V in Absolute Maximum Ratings  Go
  • Updated the footnote in Absolute Maximum Ratings to add clarification Go
  • Added continuous input current specification to Absolute Maximum Ratings Go
  • Deleted machine model (MM) specification from ESD Ratings Go
  • Updated thermal specifications for D and DBV package in Thermal Information  Go
  • Deleted TA = 0°C to +70°C specifications from across all Electrical Characteristics TableGo
  • Deleted the minimum, maximum, and over temperature specifications in the Electrical Characteristics: AC Performance sectionsGo
  • Changed SSBW at G = +1 V/V from 1700 MHz to 1900 MHz in Electrical Characteristics: VS = ±5 V, OPA695D, OPA695DBV TableGo
  • Changed SSBW at G = +2 V/V from 1400 MHz to 900 MHz in Electrical Characteristics: VS = ±5 V, OPA695D, OPA695DBV Table Go
  • Changed typical SSBW at G = +8 V/V from 450 MHz to 600 MHz in Electrical Characteristics: VS = ±5 V, OPA695D, OPA695DBV TableGo
  • Changed SSBW at G = +16 V/V from 350 MHz to 500 MHz in Electrical Characteristics: VS = ±5 V, OPA695D, OPA695DBV TableGo
  • Changed Bandwidth for 0.2-dB gain flatness from 320 MHz to 120 MHz in Electrical Characteristics: VS = ±5 V, OPA695D, OPA695DBV TableGo
  • Changed typical Peaking at a gain of +1V/V from 4.6 dB to 3.7 dB in Electrical Characteristics: VS = ±5 V, OPA695D, OPA695DBV TableGo
  • Changed LSBW at G = 8 V/V from 450 MHz to 510 MHz in Electrical Characteristics: VS = ±5 V, OPA695D, OPA695DBV TableGo
  • Changed typical Slew rate at G = –8 V/V from 4300 V/μs to 5000 V/μs in Electrical Characteristics: VS = ±5 V, OPA695D, OPA695DBV TableGo
  • Changed typical Slew rate at G = +8 V/V from 4300 V/μs to 5000 V/μs in Electrical Characteristics: VS = ±5 V, OPA695D, OPA695DBV TableGo
  • Changed Rise and fall time at VO = 0.5-V Step from 0.8 ns to 0.65 ns in Electrical Characteristics: VS = ±5 V, OPA695D, OPA695DBV TableGo
  • Changed Rise and fall time at VO = 4-V Step from 1 ns to 0.7 ns in Electrical Characteristics: VS = ±5 V, OPA695D, OPA695DBV TableGo
  • Changed Settling time to 0.5% of 10 ns from Settling time to 0.1% of 10 ns in Electrical Characteristics: VS = ±5 V, OPA695D, OPA695DBV TableGo
  • Deleted settling time to 0.02% and 0.1% from Electrical Characteristics Table Go
  • Changed typical 2nd-order Harmonic Distortion at RL = 100 Ω  from –65 dBc to –75 dBc in Electrical Characteristics: VS = ±5 V, OPA695D, OPA695DBV TableGo
  • Changed typical 3rd-order Harmonic Distortion at RL = 100 Ω  from –86 dBc to –92 dBc in Electrical Characteristics: VS = ±5 V, OPA695D, OPA695DBV TableGo
  • Changed typical Input voltage noise from 1.8 nV/√Hz to 2 nV/√Hz in Electrical Characteristics: VS = ±5 V, OPA695D, OPA695DBV TableGo
  • Changed typical noninverting input current noise from 18 pA/√Hz to 14 pA/√Hz in Electrical Characteristics: VS = ±5 V, OPA695D, OPA695DBV TableGo
  • Deleted differential gain and differential phase specifications from across all Electrical Characteristics Go
  • Changed typical Open-loop transimpedance gain from 85 kΩ to 300 kΩ in Electrical Characteristics: VS = ±5 V, OPA695D, OPA695DBV TableGo
  • Changed typical Inverting input bias current from ±20 μA to ±5 μA in Electrical Characteristics: VS = ±5 V, OPA695D, OPA695DBV TableGo
  • Added typical specification for Average inverting input bias current drift in Electrical Characteristics: VS = ±5 V, OPA695D, OPA695DBV TableGo
  • Changed typical Common-mode input range from ±3.3 V to ±3.4 V in Electrical Characteristics: VS = ±5 V, OPA695D, OPA695DBV TableGo
  • Changed typical Common-mode rejection ratio from 56 dB to 65 dB in Electrical Characteristics: VS = ±5 V, OPA695D, OPA695DBV TableGo
  • Changed Noninverting input impedance from 280 || 1.2 (kΩ || pF) to 450 || 2 (kΩ || pF) in Electrical Characteristics: VS = ±5 V, OPA695D, OPA695DBV TableGo
  • Changed Inverting input resistance from 29 Ω to 20 Ω in Electrical Characteristics: VS = ±5 V, OPA695D, OPA695DBV TableGo
  • Changed minimum Output voltage swing at no load from ±4 V to ±3.95 V in Electrical Characteristics: VS = ±5 V, OPA695D, OPA695DBV TableGo
  • Changed typical Output voltage swing at no load from ±4.2 V to ±4.05 V in Electrical Characteristics: VS = ±5 V, OPA695D, OPA695DBV TableGo
  • Changed minimum Output voltage swing at no load, TA = –40°C to +85°C from ±3.9 V to ±3.85 V in Electrical Characteristics: VS = ±5 V, OPA695D, OPA695DBV TableGo
  • Changed minimum Output voltage swing at RL = 100 Ω from ±3.7 V to ±3.65 V in Electrical Characteristics: VS = ±5 V, OPA695D, OPA695DBV TableGo
  • Changed typical Output voltage swing at RL = 100 Ω from ±3.9 V to ±3.75 V in Electrical Characteristics: VS = ±5 V, OPA695D, OPA695DBV TableGo
  • Changed minimum Output voltage swing at RL = 100 Ω, TA = –40°C to +85°C from ±3.6 V to ±3.55 V in Electrical Characteristics: VS = ±5 V, OPA695D, OPA695DBV TableGo
  • Changed typical Output current sourcing from 120 mA to 140 mA in Electrical Characteristics: VS = ±5 V, OPA695D, OPA695DBV TableGo
  • Changed typical Output current sourcing from –120 mA to –140 mA in Electrical Characteristics: VS = ±5 V, OPA695D, OPA695DBV TableGo
  • Changed Closed-Loop output impedance from 0.04 Ω to 0.02 Ω in Electrical Characteristics: VS = ±5 V, OPA695D, OPA695DBV TableGo
  • Changed typical Quiescent current from 12.9 mA to 14 mA in Electrical Characteristics: VS = ±5 V, OPA695D, OPA695DBV TableGo
  • Changed minimum and maximum Quiescent current from 12.6 mA and 13.3 mA to 11.7 mA and 15.6 mA in Electrical Characteristics: VS = ±5 V, OPA695D, OPA695DBV TableGo
  • Changed minimum and maximum Quiescent current, TA = –40°C to +85°C from 11 mA and 14.1 mA to 10 mA and 18 mA in Electrical Characteristics: VS = ±5 V, OPA695D, OPA695DBV TableGo
  • Changed typical negative power-supply rejection ratio from 55 dB to 72 dB in Electrical Characteristics: VS = ±5 V, OPA695D, OPA695DBV TableGo
  • Changed minimum Power-down quiescent current from –170 μA to 200 μA in Electrical Characteristics: VS = ±5 V, OPA695D, OPA695DBV TableGo
  • Changed typical Power-down quiescent current from –100 μA to 160 μA in Electrical Characteristics: VS = ±5 V, OPA695D, OPA695DBV TableGo
  • Changed minimum Power-down quiescent current, TA = –40°C to +85°C from –192 μA to 210 μA in Electrical Characteristics: VS = ±5 V, OPA695D, OPA695DBV TableGo
  • Changed Disable time from 1 μs to 4 μs in Electrical Characteristics: VS = ±5 V, OPA695D, OPA695DBV TableGo
  • Changed Enable time from 25 ns to 80 ns in Electrical Characteristics: VS = ±5 V, OPA695D, OPA695DBV TableGo
  • Changed Output capacitance in disable from 4 pF to 2.5 pF in Electrical Characteristics: VS = ±5 V, OPA695D, OPA695DBV TableGo
  • Changed typical Enable voltage threshold from 3.3 V to 3 V in Electrical Characteristics: VS = ±5 V, OPA695D, OPA695DBV TableGo
  • Changed typical Disable voltage threshold from 1.8 V to 2.3 V in Electrical Characteristics: VS = ±5 V, OPA695D, OPA695DBV TableGo
  • Changed typical Disable Control pin input bias current from 75 μA to 95 μA in Electrical Characteristics: VS = ±5 V, OPA695D, OPA695DBV TableGo
  • Updated test level related and current polarity footnote across the Electrical Characteristics Go
  • Changed SSBW at G = 1 V/V from 1400 MHz to 1200 MHz in Electrical Characteristics: VS = 5 V, OPA695D, OPA695DBV Go
  • Changed SSBW at G = 2 V/V from 960 MHz to 700 MHz in Electrical Characteristics: VS = 5 V, OPA695D, OPA695DBV Go
  • Changed typical SSBW at G = 8 V/V from 395 MHz to 500 MHz in Electrical Characteristics: VS = 5 V, OPA695D, OPA695DBV Go
  • Changed typical SSBW at G = 16 V/V from 235 MHz to 410 MHz in Electrical Characteristics: VS = 5 V, OPA695D, OPA695DBV Go
  • Changed Bandwidth for 0.2-dB gain flatness from 230 MHz to 110 MHz in Electrical Characteristics: VS = 5 V, OPA695D, OPA695DBV Go
  • Changed typical Peaking at a gain of +1V/V from 1 dB to 2.2 dB in Electrical Characteristics: VS = 5 V, OPA695D, OPA695DBV Go
  • Changed LSBW at G = 8 V/V from 310 MHz to 430 MHz in Electrical Characteristics: VS = 5 V, OPA695D, OPA695DBV Go
  • Changed typical Slew rate at G = +8 V/V from 1700 V/μs to 2500 V/μs in Electrical Characteristics: VS = 5 V, OPA695D, OPA695DBV Go
  • Changed Rise and fall time at VO = 0.5-V step from 1 ns to 0.7 ns in Electrical Characteristics: VS = 5 V, OPA695D, OPA695DBV Go
  • Changed Rise and fall time at VO = 2-V step from 1 ns to 0.8 ns in Electrical Characteristics: VS = 5 V, OPA695D, OPA695DBV Go
  • Changed Settling time to 0.5% of 10 ns from Settling time to 0.1% of 10 ns in Electrical Characteristics: VS = 5 V, OPA695D, OPA695DBV Go
  • Changed typical 2nd-order harmonic distortion at RL = 100 Ω to –69 dBc from –62 dBc in Electrical Characteristics: VS = 5 V, OPA695D, OPA695DBV Go
  • Changed typical 2nd-order harmonic distortion at RL = 500 Ω to –68 dBc from –70 dBc in Electrical Characteristics: VS = 5 V, OPA695D, OPA695DBV Go
  • Changed typical 3rd-order harmonic distortion at RL = 100 Ω to –62 dBc from –66 dBc in Electrical Characteristics: VS = 5 V, OPA695D, OPA695DBV Go
  • Changed typical 3rd -order harmonic distortion at RL = 500 Ω to –63 dBc from –65 dBc in Electrical Characteristics: VS = 5 V, OPA695D, OPA695DBV Go
  • Changed typical Input voltage noise from 1.8 nV/√Hz to 1.9 nV/√Hz in Electrical Characteristics: VS = 5 V, OPA695D, OPA695DBV Go
  • Changed typical Noninverting input current noise from 18 pA/√Hz to 14 pA/√Hz in Electrical Characteristics: VS = 5 V, OPA695D, OPA695DBV Go
  • Changed typical Open-loop transimpedance gain from 70 kΩ to 250 kΩ in Electrical Characteristics: VS = 5 V, OPA695D, OPA695DBV Go
  • Changed typical Noninverting input bias current from ±5 μA to +15 μA in Electrical Characteristics: VS = 5 V, OPA695D, OPA695DBV Go
  • Changed typical Common-mode input range (positive) from 3.3 V to 3.4 V in Electrical Characteristics: VS = 5 V, OPA695D, OPA695DBV Go
  • Changed typical Common-mode input range (negative) from 1.7 V to 1.6 V in Electrical Characteristics: VS = 5 V, OPA695D, OPA695DBV Go
  • Changed typical Common-mode rejection ratio from 54 dB to 65 dB in Electrical Characteristics: VS = 5 V, OPA695D, OPA695DBV Go
  • Changed Noninverting input impedance from 280 || 1.2 (kΩ || pF) to 250 || 2 (kΩ || pF) in Electrical Characteristics: VS = 5 V, OPA695D, OPA695DBV Go
  • Changed Inverting input resistance from 32 Ω to 21 Ω in Electrical Characteristics: VS = 5 V, OPA695D, OPA695DBV Go
  • Changed typical Output voltage (positive) at no load from 4.2 V to 4.05 V in Electrical Characteristics: VS = 5 V, OPA695D, OPA695DBV Go
  • Changed minimum Output voltage swing (positive) at no load from 4 V to 3.95 V in Electrical Characteristics: VS = 5 V, OPA695D, OPA695DBV Go
  • Changed minimum Output voltage swing (positive) at no load, TA = –40°C to +85°C from 3.8 V to 3.75 V in Electrical Characteristics: VS = 5 V, OPA695D, OPA695DBV Go
  • Changed maximum Output voltage swing (negative) at no load from 1 V to 1.05 V in Electrical Characteristics: VS = 5 V, OPA695D, OPA695DBV Go
  • Changed typical Output voltage swing (negative) at no load from 0.8 V to 0.9 V in Electrical Characteristics: VS = 5 V, OPA695D, OPA695DBV Go
  • Changed maximum Output voltage swing (negative) at no load, TA = –40°C to +85°C from 1.2 V to 1.25 V in Electrical Characteristics: VS = 5 V, OPA695D, OPA695DBV Go
  • Changed typical Output current sourcing from 90 mA to 100 mA in Electrical Characteristics: VS = 5 V, OPA695D, OPA695DBV Go
  • Changed minimum Output current sinking, TA = –40°C to +85°C from –66 mA to –60 mA in Electrical Characteristics: VS = 5 V, OPA695D, OPA695DBV Go
  • Changed Closed-loop output impedance from 0.05 Ω to 0.02 Ω in Electrical Characteristics: VS = 5 V, OPA695D, OPA695DBV Go
  • Changed maximum Quiescent current from 12 mA to 14.4 mA in Electrical Characteristics: VS = 5 V, OPA695D, OPA695DBV Go
  • Changed maximum Quiescent current, TA = –40°C to +85°C from 12.9 mA to 17.1 mA in Electrical Characteristics: VS = 5 V, OPA695D, OPA695DBV Go
  • Changed typical Negative power-supply rejection ratio from 51 dB to 69 dB in Electrical Characteristics: VS = 5 V, OPA695D, OPA695DBV TableGo
  • Changed typical Power-down quiescent current from -95 μA to 120 μA in Electrical Characteristics: VS = 5 V, OPA695D, OPA695DBV TableGo
  • Changed Disable time from 1 μs to 5 μs in Electrical Characteristics: VS = 5 V, OPA695D, OPA695DBV Go
  • Changed Enable time from 25 ns to 80 ns in Electrical Characteristics: VS = 5 V, OPA695D, OPA695DBV Go
  • Changed typical Enable voltage threshold from 3.3 V to 3.1 V in Electrical Characteristics: VS = 5 V, OPA695D, OPA695DBV Go
  • Changed typical Disable voltage threshold from 1.8 V to 2.4 V in Electrical Characteristics: VS = 5 V, OPA695D, OPA695DBV Go
  • Changed typical Disable Control pin input bias current from 75 μA to 95 μA in Electrical Characteristics: VS = 5 V, OPA695D, OPA695DBV TableGo
  • Deleted Composite Video dG/dφ plot from Typical Characteristics: VS = ±5 V, OPA695IDGK Go
  • Deleted the differential operation plots from Typical Characteristics: VS = ±5 V, OPA695IDGK and differential small signal parameter measurement information sectionGo
  • Deleted RF Specifications and Applications, Input Return Loss (S11), Output Return Loss (S22), Forward Gain (S21), Reverse Isolation and Limits to Dynamic Range from Feature Description Go
  • Deleted SAW Filter Buffer and RGB Video Line Driver sections from Application Information Go

Changes from Revision G (April 2009) to Revision H (April 2015)

  • Added ESD Ratings table, Feature Description section, Device Functional Modes, Application and Implementation section, Power Supply Recommendations section, Layout section, Device and Documentation Support section, and Mechanical, Packaging, and Orderable Information sectionGo

Changes from Revision F (July 2006) to Revision G (April 2009)

  • Added DGK (MSOP-8) package to Package Ordering Information table and to Thermal Resistance specification in the Electrical Characteristics tablesGo

Changes from Revision E (March 2006) to Revision F (July 2006)

  • Changed Storage Temperature Range from −40°C to +125°C to −65°C to +125°CGo