SLLS059 Data sheet

SLLS059E February 1990 – February 2024 SN751177 , SN751178

PRODUCTION DATA

Package Options

Refer to the PDF data sheet for device specific package drawings

Mechanical Data (Package|Pins)

NS|16
N|16

Thermal pad, mechanical data (Package|Pins)

Orderable Information

5.5.1 Electrical Characteristics

over recommended ranges of common-mode input voltage, supply voltage, and operating free-air temperature (unless otherwise noted)

PARAMETER			TEST CONDITIONS		MIN	TYP^⁽¹⁾	MAX	UNIT
V_IT+	Positive-going input threshold voltage		V_O = 2.7V,	I_O = −0.4mA			0.2	V
V_IT−	Negative-going input threshold voltage		V_O = 0.5V,	I_O = 16mA	−0.2^⁽²⁾			V
V_hys	Input hysteresis voltage (V_IT+ − V_IT−)					50		mV
V_IK	Enable clamp voltage	SN751177	I_I = −18mA				−1.5	V
V_OH	High-level output voltage		V_ID = 200mV,	I_OH = −400μA	2.7			V
V_OL	Low-level output voltage		V_ID = −200mV	I_OL = 8mA			0.45	V
V_OL	Low-level output voltage		V_ID = −200mV	I_OL = 16mA			0.5	V
I_OZ	High-impedance-state output current	SN751177	V_O = 0.4V to 2.4V				±20	μA
I_I	Line input current (see ^{Note 7})		Other input at 0V	V_I = 12V			1	mA
I_I	Line input current (see ^{Note 7})		Other input at 0V	V_I = −7V			−0.8	mA
I_IH	High-level enable input current	SN751177	V_IH = 2.7V				20	μA
I_IL	Low-level enable input current	SN751177	V_IL = 0.4V				−100	μA
I_OS	Short-circuit output current (see ^{Note 6})				−15		−85	μA
I_CC	Supply current		No load,	outputs enabled		80	110	mA
r_i	Input resistance				12			kΩ

(1) All typical values are at V_CC = 5V and T_A = 25°C.

(2) The algebraic convention, where the less positive (more negative) limit is designated as minimum, is used in this data sheet for common-mode output and threshold voltage levels only.

(3) Not more than one output should be shorted at a time, and the duration of the short circuit should not exceed one second.

(4) Refer to ANSI Standards TIA/EIA-422-B, TIA/EIA-423-A, and TIA/EIA-485-A for exact conditions.