7 |
RESERVED |
R/W |
0 |
This bit is reserved
|
6 |
DIS_DET_PLL |
R/W |
0 |
Ignore PLL overate Detection
This bit controls whether to ignore the PLL overrate detection. The PLL must be slow than 150MHz or an error will be reported. When ignored, a PLL overrate error will not cause a clock error.
0: Regard PLL overrate detection
1: Ignore PLL overrate detection |
5 |
DIS_DET_BCLK_RANGE |
R/W |
0 |
Ignore BCK Range Detection
This bit controls whether to ignore the BCK range detection. The BCK must be stable between 256KHz and 50MHz or an error will be reported. When ignored, a BCK range error will not cause a clock error.
0: Regard BCK Range detection
1: Ignore BCK Range detection |
4 |
DIS_DET_FS |
R/W |
0 |
Ignore FS Error Detection
This bit controls whether to ignore the FS Error detection. When ignored, FS error will not cause a clock error.But CLKDET_STATUS will report fs error.
0: Regard FS detection
1: Ignore FS detection |
3 |
DIS_DET_BCLK |
R/W |
0 |
Ignore BCK Detection
This bit controls whether to ignore the BCK detection against LRCK. The BCK must be stable between 32FS and 512FS inclusive or an error will be reported. When ignored, a BCK error will not cause a clock error.
0: Regard BCK detection
1: Ignore BCK detection |
2 |
DIS_DET_MISS |
R/W |
0 |
Ignore BCK Missing Detection
This bit controls whether to ignore the BCK missing detection. When ignored an BCK missing will not cause a clock error.
0: Regard BCK missing detection
1: Ignore BCK missing detection |
1 |
RESERVED |
R/W |
0 |
This bit is reserved
|
0 |
RESERVED |
R/W |
0 |
This bit is reserved
|