SBOSA45C february 2022 – may 2023 TMP1826
PRODUCTION DATA
The stacked conversion mode is a programmable feature in bus powered mode that can be enabled by setting CONV_MODE_SEL as '01b' in the device configuration-1 register. As shown in Figure 9-15, the devices can use the address programmed in the short address register to delay the temperature conversion for the devices when the stacked conversion mode is enabled. No more than two devices are actively converting at any given time, therefore the current drain in bus powered configuration is limited. This allows the application to avoid simultaneous temperature conversion by multiple parts and reducing the user system maximal supply current.