SPRSP68B January   2023  – November 2023 TMS320F2800152-Q1 , TMS320F2800153-Q1 , TMS320F2800154-Q1 , TMS320F2800155 , TMS320F2800155-Q1 , TMS320F2800156-Q1 , TMS320F2800157 , TMS320F2800157-Q1

PRODMIX  

  1.   1
  2. Features
  3. Applications
  4. Description
    1. 3.1 Functional Block Diagram
  5. Device Comparison
    1. 4.1 Related Products
  6. Pin Configuration and Functions
    1. 5.1 Pin Diagrams
    2. 5.2 Pin Attributes
    3. 5.3 Signal Descriptions
      1. 5.3.1 Analog Signals
      2. 5.3.2 Digital Signals
      3. 5.3.3 Power and Ground
      4. 5.3.4 Test, JTAG, and Reset
    4. 5.4 Pin Multiplexing
      1. 5.4.1 GPIO Muxed Pins
        1. 5.4.1.1 GPIO Muxed Pins
      2. 5.4.2 Digital Inputs on ADC Pins (AIOs)
      3. 5.4.3 Digital Inputs and Outputs on ADC Pins (AGPIOs)
      4. 5.4.4 GPIO Input X-BAR
      5. 5.4.5 GPIO Output X-BAR and ePWM X-BAR
    5. 5.5 Pins With Internal Pullup and Pulldown
    6. 5.6 Connections for Unused Pins
  7. Specifications
    1. 6.1  Absolute Maximum Ratings
    2. 6.2  ESD Ratings – Commercial
    3. 6.3  ESD Ratings – Automotive
    4. 6.4  Recommended Operating Conditions
    5. 6.5  Power Consumption Summary
      1. 6.5.1 System Current Consumption - VREG Enable - Internal Supply
      2. 6.5.2 System Current Consumption - VREG Disable - External Supply
      3. 6.5.3 Operating Mode Test Description
      4. 6.5.4 Current Consumption Graphs
      5. 6.5.5 Reducing Current Consumption
        1. 6.5.5.1 Typical Current Reduction per Disabled Peripheral
    6. 6.6  Electrical Characteristics
    7. 6.7  Thermal Resistance Characteristics for PN Package
    8. 6.8  Thermal Resistance Characteristics for PM Package
    9. 6.9  Thermal Resistance Characteristics for PHP Package
    10. 6.10 Thermal Resistance Characteristics for RHB Package
    11. 6.11 Thermal Design Considerations
    12. 6.12 Thermal Design Considerations for AEC-Q100 Grade 0
      1. 6.12.1 Simple Frequency Reduction
      2. 6.12.2 Dynamic Frequency Reduction
      3. 6.12.3 Flash Considerations
    13. 6.13 System
      1. 6.13.1  Power Management Module (PMM)
        1. 6.13.1.1 Introduction
        2. 6.13.1.2 Overview
          1. 6.13.1.2.1 Power Rail Monitors
            1. 6.13.1.2.1.1 I/O POR (Power-On Reset) Monitor
            2. 6.13.1.2.1.2 I/O BOR (Brown-Out Reset) Monitor
            3. 6.13.1.2.1.3 VDD POR (Power-On Reset) Monitor
          2. 6.13.1.2.2 External Supervisor Usage
          3. 6.13.1.2.3 Delay Blocks
          4. 6.13.1.2.4 Internal 1.2-V LDO Voltage Regulator (VREG)
          5. 6.13.1.2.5 VREGENZ
        3. 6.13.1.3 External Components
          1. 6.13.1.3.1 Decoupling Capacitors
            1. 6.13.1.3.1.1 VDDIO Decoupling
            2. 6.13.1.3.1.2 VDD Decoupling
        4. 6.13.1.4 Power Sequencing
          1. 6.13.1.4.1 Supply Pins Ganging
          2. 6.13.1.4.2 Signal Pins Power Sequence
          3. 6.13.1.4.3 Supply Pins Power Sequence
            1. 6.13.1.4.3.1 External VREG/VDD Mode Sequence
            2. 6.13.1.4.3.2 Internal VREG/VDD Mode Sequence
            3. 6.13.1.4.3.3 Supply Sequencing Summary and Effects of Violations
            4. 6.13.1.4.3.4 Supply Slew Rate
        5. 6.13.1.5 Recommended Operating Conditions Applicability to the PMM
        6. 6.13.1.6 Power Management Module Electrical Data and Timing
          1. 6.13.1.6.1 Power Management Module Operating Conditions
          2. 6.13.1.6.2 Power Management Module Characteristics
      2. 6.13.2  Reset Timing
        1. 6.13.2.1 Reset Sources
        2. 6.13.2.2 Reset Electrical Data and Timing
          1. 6.13.2.2.1 Reset - XRSn - Timing Requirements
          2. 6.13.2.2.2 Reset - XRSn - Switching Characteristics
          3. 6.13.2.2.3 Reset Timing Diagrams
      3. 6.13.3  Clock Specifications
        1. 6.13.3.1 Clock Sources
        2. 6.13.3.2 Clock Frequencies, Requirements, and Characteristics
          1. 6.13.3.2.1 Input Clock Frequency and Timing Requirements, PLL Lock Times
            1. 6.13.3.2.1.1 Input Clock Frequency
            2. 6.13.3.2.1.2 XTAL Oscillator Characteristics
            3. 6.13.3.2.1.3 X1 Input Level Characteristics When Using an External Clock Source - Not a Crystal
            4. 6.13.3.2.1.4 X1 Timing Requirements
            5. 6.13.3.2.1.5 AUXCLKIN Timing Requirements
            6. 6.13.3.2.1.6 APLL Characteristics
            7. 6.13.3.2.1.7 XCLKOUT Switching Characteristics - PLL Bypassed or Enabled
            8. 6.13.3.2.1.8 Internal Clock Frequencies
        3. 6.13.3.3 Input Clocks and PLLs
        4. 6.13.3.4 XTAL Oscillator
          1. 6.13.3.4.1 Introduction
          2. 6.13.3.4.2 Overview
            1. 6.13.3.4.2.1 Electrical Oscillator
              1. 6.13.3.4.2.1.1 Modes of Operation
                1. 6.13.3.4.2.1.1.1 Crystal Mode of Operation
                2. 6.13.3.4.2.1.1.2 Single-Ended Mode of Operation
              2. 6.13.3.4.2.1.2 XTAL Output on XCLKOUT
            2. 6.13.3.4.2.2 Quartz Crystal
            3. 6.13.3.4.2.3 GPIO Modes of Operation
          3. 6.13.3.4.3 Functional Operation
            1. 6.13.3.4.3.1 ESR – Effective Series Resistance
            2. 6.13.3.4.3.2 Rneg – Negative Resistance
            3. 6.13.3.4.3.3 Start-up Time
              1. 6.13.3.4.3.3.1 X1/X2 Precondition
            4. 6.13.3.4.3.4 DL – Drive Level
          4. 6.13.3.4.4 How to Choose a Crystal
          5. 6.13.3.4.5 Testing
          6. 6.13.3.4.6 Common Problems and Debug Tips
          7. 6.13.3.4.7 Crystal Oscillator Specifications
            1. 6.13.3.4.7.1 Crystal Oscillator Electrical Characteristics
            2. 6.13.3.4.7.2 Crystal Equivalent Series Resistance (ESR) Requirements
            3. 6.13.3.4.7.3 Crystal Oscillator Parameters
            4. 6.13.3.4.7.4 Crystal Oscillator Electrical Characteristics
        5. 6.13.3.5 Internal Oscillators
          1. 6.13.3.5.1 INTOSC Characteristics
          2. 6.13.3.5.2 INTOSC2 with External Precision Resistor – ExtR
      4. 6.13.4  Flash Parameters
        1. 6.13.4.1 Flash Parameters 
      5. 6.13.5  RAM Specifications
      6. 6.13.6  ROM Specifications
      7. 6.13.7  Emulation/JTAG
        1. 6.13.7.1 JTAG Electrical Data and Timing
          1. 6.13.7.1.1 JTAG Timing Requirements
          2. 6.13.7.1.2 JTAG Switching Characteristics
          3. 6.13.7.1.3 JTAG Timing Diagram
        2. 6.13.7.2 cJTAG Electrical Data and Timing
          1. 6.13.7.2.1 cJTAG Timing Requirements
          2. 6.13.7.2.2 cJTAG Switching Characteristics
          3. 6.13.7.2.3 cJTAG Timing Diagram
      8. 6.13.8  GPIO Electrical Data and Timing
        1. 6.13.8.1 GPIO – Output Timing
          1. 6.13.8.1.1 General-Purpose Output Switching Characteristics
          2. 6.13.8.1.2 General-Purpose Output Timing Diagram
        2. 6.13.8.2 GPIO – Input Timing
          1. 6.13.8.2.1 General-Purpose Input Timing Requirements
          2. 6.13.8.2.2 Sampling Mode
        3. 6.13.8.3 Sampling Window Width for Input Signals
      9. 6.13.9  Interrupts
        1. 6.13.9.1 External Interrupt (XINT) Electrical Data and Timing
          1. 6.13.9.1.1 External Interrupt Timing Requirements
          2. 6.13.9.1.2 External Interrupt Switching Characteristics
          3. 6.13.9.1.3 External Interrupt Timing
      10. 6.13.10 Low-Power Modes
        1. 6.13.10.1 Clock-Gating Low-Power Modes
        2. 6.13.10.2 Low-Power Mode Wake-up Timing
          1. 6.13.10.2.1 IDLE Mode Timing Requirements
          2. 6.13.10.2.2 IDLE Mode Switching Characteristics
          3. 6.13.10.2.3 IDLE Entry and Exit Timing Diagram
          4. 6.13.10.2.4 STANDBY Mode Timing Requirements
          5. 6.13.10.2.5 STANDBY Mode Switching Characteristics
          6. 6.13.10.2.6 STANDBY Entry and Exit Timing Diagram
          7. 6.13.10.2.7 HALT Mode Timing Requirements
          8. 6.13.10.2.8 HALT Mode Switching Characteristics
          9. 6.13.10.2.9 HALT Entry and Exit Timing Diagram
    14. 6.14 Analog Peripherals
      1. 6.14.1 Analog Pins and Internal Connections
      2. 6.14.2 Analog Signal Descriptions
      3. 6.14.3 Analog-to-Digital Converter (ADC)
        1. 6.14.3.1 ADC Configurability
          1. 6.14.3.1.1 Signal Mode
        2. 6.14.3.2 ADC Electrical Data and Timing
          1. 6.14.3.2.1 ADC Operating Conditions
          2. 6.14.3.2.2 ADC Characteristics
          3. 6.14.3.2.3 ADC Performance Per Pin
          4. 6.14.3.2.4 ADC Input Model
          5. 6.14.3.2.5 ADC Timing Diagrams
      4. 6.14.4 Temperature Sensor
        1. 6.14.4.1 Temperature Sensor Electrical Data and Timing
          1. 6.14.4.1.1 Temperature Sensor Characteristics
      5. 6.14.5 Comparator Subsystem (CMPSS)
        1. 6.14.5.1 CMPSS Module Variants
        2. 6.14.5.2 CMPx_DACL
        3. 6.14.5.3 CMPSS Connectivity Diagram
        4. 6.14.5.4 Block Diagrams
        5. 6.14.5.5 CMPSS Electrical Data and Timing
          1. 6.14.5.5.1 CMPSS Comparator Electrical Characteristics
          2. 6.14.5.5.2 CMPSS_LITE Comparator Electrical Characteristics
          3.        CMPSS Comparator Input Referred Offset and Hysteresis
          4. 6.14.5.5.3 CMPSS DAC Static Electrical Characteristics
          5. 6.14.5.5.4 CMPSS_LITE DAC Static Electrical Characteristics
          6. 6.14.5.5.5 CMPSS Illustrative Graphs
          7. 6.14.5.5.6 CMPSS DAC Dynamic Error
          8. 6.14.5.5.7 Buffered Output from CMPx_DACL Operating Conditions
          9. 6.14.5.5.8 Buffered Output from CMPx_DACL Electrical Characteristics
    15. 6.15 Control Peripherals
      1. 6.15.1 Enhanced Pulse Width Modulator (ePWM)
        1. 6.15.1.1 Control Peripherals Synchronization
        2. 6.15.1.2 ePWM Electrical Data and Timing
          1. 6.15.1.2.1 ePWM Timing Requirements
          2. 6.15.1.2.2 ePWM Switching Characteristics
          3. 6.15.1.2.3 Trip-Zone Input Timing
            1. 6.15.1.2.3.1 Trip-Zone Input Timing Requirements
            2. 6.15.1.2.3.2 PWM Hi-Z Characteristics Timing Diagram
      2. 6.15.2 High-Resolution Pulse Width Modulator (HRPWM)
        1. 6.15.2.1 HRPWM Electrical Data and Timing
          1. 6.15.2.1.1 High-Resolution PWM Characteristics
      3. 6.15.3 External ADC Start-of-Conversion Electrical Data and Timing
        1. 6.15.3.1 External ADC Start-of-Conversion Switching Characteristics
        2. 6.15.3.2 ADCSOCAO or ADCSOCBO Timing Diagram
      4. 6.15.4 Enhanced Capture (eCAP)
        1. 6.15.4.1 eCAP Block Diagram
        2. 6.15.4.2 eCAP Synchronization
        3. 6.15.4.3 eCAP Electrical Data and Timing
          1. 6.15.4.3.1 eCAP Timing Requirements
          2. 6.15.4.3.2 eCAP Switching Characteristics
      5. 6.15.5 Enhanced Quadrature Encoder Pulse (eQEP)
        1. 6.15.5.1 eQEP Electrical Data and Timing
          1. 6.15.5.1.1 eQEP Timing Requirements
          2. 6.15.5.1.2 eQEP Switching Characteristics
    16. 6.16 Communications Peripherals
      1. 6.16.1 Controller Area Network (CAN)
      2. 6.16.2 Modular Controller Area Network (MCAN)
      3. 6.16.3 Inter-Integrated Circuit (I2C)
        1. 6.16.3.1 I2C Electrical Data and Timing
          1. 6.16.3.1.1 I2C Timing Requirements
          2. 6.16.3.1.2 I2C Switching Characteristics
          3. 6.16.3.1.3 I2C Timing Diagram
      4. 6.16.4 Power Management Bus (PMBus) Interface
        1. 6.16.4.1 PMBus Electrical Data and Timing
          1. 6.16.4.1.1 PMBus Electrical Characteristics
          2. 6.16.4.1.2 PMBus Fast Mode Switching Characteristics
          3. 6.16.4.1.3 PMBus Standard Mode Switching Characteristics
      5. 6.16.5 Serial Communications Interface (SCI)
      6. 6.16.6 Serial Peripheral Interface (SPI)
        1. 6.16.6.1 SPI Master Mode Timings
          1. 6.16.6.1.1 SPI Master Mode Timing Requirements
          2. 6.16.6.1.2 SPI Master Mode Switching Characteristics - Clock Phase 0
          3. 6.16.6.1.3 SPI Master Mode Switching Characteristics - Clock Phase 1
          4. 6.16.6.1.4 SPI Master Mode Timing Diagrams
        2. 6.16.6.2 SPI Slave Mode Timings
          1. 6.16.6.2.1 SPI Slave Mode Timing Requirements
          2. 6.16.6.2.2 SPI Slave Mode Switching Characteristics
          3. 6.16.6.2.3 SPI Slave Mode Timing Diagrams
      7. 6.16.7 Local Interconnect Network (LIN)
  8. Detailed Description
    1. 7.1  Overview
    2. 7.2  Functional Block Diagram
    3. 7.3  Memory
      1. 7.3.1 Memory Map
        1. 7.3.1.1 Dedicated RAM (Mx RAM)
        2. 7.3.1.2 Local Shared RAM (LSx RAM)
      2. 7.3.2 Flash Memory Map
      3. 7.3.3 Peripheral Registers Memory Map
    4. 7.4  Identification
    5. 7.5  C28x Processor
      1. 7.5.1 Floating-Point Unit (FPU)
      2. 7.5.2 Trigonometric Math Unit (TMU)
      3. 7.5.3 VCRC Unit
      4. 7.5.4 Lockstep Compare Module (LCM)
    6. 7.6  Device Boot Modes
      1. 7.6.1 Device Boot Configurations
        1. 7.6.1.1 Configuring Boot Mode Pins
        2. 7.6.1.2 Configuring Boot Mode Table Options
      2. 7.6.2 GPIO Assignments
    7. 7.7  Security
      1. 7.7.1 Securing the Boundary of the Chip
        1. 7.7.1.1 JTAGLOCK
        2. 7.7.1.2 Zero-pin Boot
      2. 7.7.2 Dual-Zone Security
      3. 7.7.3 Disclaimer
    8. 7.8  Watchdog
    9. 7.9  C28x Timers
    10. 7.10 Dual-Clock Comparator (DCC)
      1. 7.10.1 Features
      2. 7.10.2 Mapping of DCCx Clock Source Inputs
    11. 7.11 Functional Safety
  9. Applications, Implementation, and Layout
    1. 8.1 Application and Implementation
    2. 8.2 Key Device Features
    3. 8.3 Application Information
      1. 8.3.1 Typical Application
        1. 8.3.1.1 On-Board Charger (OBC)
          1. 8.3.1.1.1 System Block Diagram
          2. 8.3.1.1.2 OBC Resources
        2. 8.3.1.2 Automotive Pump
          1. 8.3.1.2.1 System Block Diagram
          2. 8.3.1.2.2 Automotive Pump Resources
        3. 8.3.1.3 Positive Temperature Coefficient (PTC) Heater
          1. 8.3.1.3.1 System Block Diagram
          2. 8.3.1.3.2 PTC Resources
        4. 8.3.1.4 Automotive HVAC Compressor
          1. 8.3.1.4.1 System Block Diagram
          2. 8.3.1.4.2 Automotive HVAC Compressor Resources
        5. 8.3.1.5 Single-Phase Line-Interactive Uninterruptable Power Supply (UPS)
          1. 8.3.1.5.1 System Block Diagram
          2. 8.3.1.5.2 Single-Phase Line-Interactive UPS Resources
        6. 8.3.1.6 AC Drive Power Stage Module
          1. 8.3.1.6.1 System Block Diagram
          2. 8.3.1.6.2 AC Drive Power Stage Module Resources
        7. 8.3.1.7 Server or Telecom Power Supply Unit (PSU)
          1. 8.3.1.7.1 System Block Diagram
          2. 8.3.1.7.2 Server or Telecom PSU Resources
  10. Device and Documentation Support
    1. 9.1 Getting Started and Next Steps
    2. 9.2 Device Nomenclature
    3. 9.3 Markings
    4. 9.4 Tools and Software
    5. 9.5 Documentation Support
    6. 9.6 Support Resources
    7. 9.7 Trademarks
    8. 9.8 Electrostatic Discharge Caution
    9. 9.9 Glossary
  11. 10Revision History
  12. 11Mechanical, Packaging, and Orderable Information

Package Options

Refer to the PDF data sheet for device specific package drawings

Mechanical Data (Package|Pins)
  • RHB|32
  • PHP|48
Thermal pad, mechanical data (Package|Pins)
Orderable Information

Flash Memory Map

On the F280015x devices, one flash bank (256KB [128KW]) is available. Code to program the flash should be executed out of RAM, there should not be any kind of access to the flash bank when an erase or program operation is in progress.

Table 7-2 Flash Memory Map
PART NUMBER SECTOR ADDRESS ECC ADDRESS
SIZE START END SIZE START END
OTP Sectors
ALL TI OTP Bank 0 (Unsecure) 1520 x 16 0x0007 1000 0x0007 15EF 128 x 16 0x0107 0200 0x0107 02BD
TI OTP Bank 0 (Secure) 16 x 16 0x0007 15F0 0x0007 15FF 128 x 16 0x0107 02BE 0x0107 02BF
User configurable DCSM OTP Bank 0 1K x 16 0x0007 8000 0x0007 83FF 128 x 16 0x0107 1000 0x0107 107F
Bank 0 Sectors
ALL Sector 0 1K x 16 0x0008 0000 0x0008 03FF 128 x 16 0x0108 0000 0x0108 007F
Sector 1 1K x 16 0x0008 0400 0x0008 07FF 128 x 16 0x0108 0080 0x0108 00FF
Sector 2 1K x 16 0x0008 0800 0x0008 0BFF 128 x 16 0x0108 0100 0x0108 017F
Sector 3 1K x 16 0x0008 0C00 0x0008 0FFF 128 x 16 0x0108 0180 0x0108 01FF
Sector 4 1K x 16 0x0008 1000 0x0008 13FF 128 x 16 0x0108 0200 0x0108 027F
Sector 5 1K x 16 0x0008 1400 0x0008 17FF 128 x 16 0x0108 0280 0x0108 02FF
Sector 6 1K x 16 0x0008 1800 0x0008 1BFF 128 x 16 0x0108 0300 0x0108 037F
Sector 7 1K x 16 0x0008 1C00 0x0008 1FFF 128 x 16 0x0108 0380 0x0108 03FF
Sector 8 1K x 16 0x0008 2000 0x0008 23FF 128 x 16 0x0108 0400 0x0108 047F
Sector 9 1K x 16 0x0008 2400 0x0008 27FF 128 x 16 0x0108 0480 0x0108 04FF
Sector 10 1K x 16 0x0008 2800 0x0008 2BFF 128 x 16 0x0108 0500 0x0108 057F
Sector 11 1K x 16 0x0008 2C00 0x0008 2FFF 128 x 16 0x0108 0580 0x0108 05FF
Sector 12 1K x 16 0x0008 3000 0x0008 33FF 128 x 16 0x0108 0600 0x0108 067F
Sector 13 1K x 16 0x0008 3400 0x0008 37FF 128 x 16 0x0108 0680 0x0108 06FF
Sector 14 1K x 16 0x0008 3800 0x0008 3BFF 128 x 16 0x0108 0700 0x0108 077F
Sector 15 1K x 16 0x0008 3C00 0x0008 3FFF 128 x 16 0x0108 0780 0x0108 07FF
Sector 16 1K x 16 0x0008 4000 0x0008 43FF 128 x 16 0x0108 0800 0x0108 087F
Sector 17 1K x 16 0x0008 4400 0x0008 47FF 128 x 16 0x0108 0880 0x0108 08FF
Sector 18 1K x 16 0x0008 4800 0x0008 4BFF 128 x 16 0x0108 0900 0x0108 097F
Sector 19 1K x 16 0x0008 4C00 0x0008 4FFF 128 x 16 0x0108 0980 0x0108 09FF
Sector 20 1K x 16 0x0008 5000 0x0008 53FF 128 x 16 0x0108 0A00 0x0108 0A7F
Sector 21 1K x 16 0x0008 5400 0x0008 57FF 128 x 16 0x0108 0A80 0x0108 0AFF
Sector 22 1K x 16 0x0008 5800 0x0008 5BFF 128 x 16 0x0108 0B00 0x0108 0B7F
Sector 23 1K x 16 0x0008 5C00 0x0008 5FFF 128 x 16 0x0108 0B80 0x0108 0BFF
Sector 24 1K x 16 0x0008 6000 0x0008 63FF 128 x 16 0x0108 0C00 0x0108 0C7F
Sector 25 1K x 16 0x0008 6400 0x0008 67FF 128 x 16 0x0108 0C80 0x0108 0CFF
Sector 26 1K x 16 0x0008 6800 0x0008 6BFF 128 x 16 0x0108 0D00 0x0108 0D7F
Sector 27 1K x 16 0x0008 6C00 0x0008 6FFF 128 x 16 0x0108 0D80 0x0108 0DFF
Sector 28 1K x 16 0x0008 7000 0x0008 73FF 128 x 16 0x0108 0E00 0x0108 0E7F
Sector 29 1K x 16 0x0008 7400 0x0008 77FF 128 x 16 0x0108 0E80 0x0108 0EFF
Sector 30 1K x 16 0x0008 7800 0x0008 7BFF 128 x 16 0x0108 0F00 0x0108 0F7F
Sector 31 1K x 16 0x0008 7C00 0x0008 7FFF 128 x 16 0x0108 0F80 0x0108 0FFF
F2800157-Q1,

F2800157,

F2800156-Q1,

F2800155-Q1,

F2800155,

F2800154-Q1

Sector 32 1K x 16 0x0008 8000 0x0008 83FF 128 x 16 0x0108 1000 0x0108 107F
Sector 33 1K x 16 0x0008 8400 0x0008 87FF 128 x 16 0x0108 1080 0x0108 10FF
Sector 34 1K x 16 0x0008 8800 0x0008 8BFF 128 x 16 0x0108 1100 0x0108 117F
Sector 35 1K x 16 0x0008 8C00 0x0008 8FFF 128 x 16 0x0108 1180 0x0108 11FF
Sector 36 1K x 16 0x0008 9000 0x0008 93FF 128 x 16 0x0108 1200 0x0108 127F
Sector 37 1K x 16 0x0008 9400 0x0008 97FF 128 x 16 0x0108 1280 0x0108 12FF
Sector 38 1K x 16 0x0008 9800 0x0008 9BFF 128 x 16 0x0108 1300 0x0108 137F
Sector 39 1K x 16 0x0008 9C00 0x0008 9FFF 128 x 16 0x0108 1380 0x0108 13FF
Sector 40 1K x 16 0x0008 A000 0x0008 A3FF 128 x 16 0x0108 1400 0x0108 147F
Sector 41 1K x 16 0x0008 A400 0x0008 A7FF 128 x 16 0x0108 1480 0x0108 14FF
Sector 42 1K x 16 0x0008 A800 0x0008 ABFF 128 x 16 0x0108 1500 0x0108 157F
Sector 43 1K x 16 0x0008 AC00 0x0008 AFFF 128 x 16 0x0108 1580 0x0108 15FF
Sector 44 1K x 16 0x0008 B000 0x0008 B3FF 128 x 16 0x0108 1600 0x0108 167F
Sector 45 1K x 16 0x0008 B400 0x0008 B7FF 128 x 16 0x0108 1680 0x0108 16FF
Sector 46 1K x 16 0x0008 B800 0x0008 BBFF 128 x 16 0x0108 1700 0x0108 177F
Sector 47 1K x 16 0x0008 BC00 0x0008 BFFF 128 x 16 0x0108 1780 0x0108 17FF
Sector 48 1K x 16 0x0008 C000 0x0008 C3FF 128 x 16 0x0108 1800 0x0108 187F
Sector 49 1K x 16 0x0008 C400 0x0008 C7FF 128 x 16 0x0108 1880 0x0108 18FF
Sector 50 1K x 16 0x0008 C800 0x0008 CBFF 128 x 16 0x0108 1900 0x0108 197F
Sector 51 1K x 16 0x0008 CC00 0x0008 CFFF 128 x 16 0x0108 1980 0x0108 19FF
Sector 52 1K x 16 0x0008 D000 0x0008 D3FF 128 x 16 0x0108 1A00 0x0108 1A7F
Sector 53 1K x 16 0x0008 D400 0x0008 D7FF 128 x 16 0x0108 1A80 0x0108 1AFF
Sector 54 1K x 16 0x0008 D800 0x0008 DBFF 128 x 16 0x0108 1B00 0x0108 1B7F
Sector 55 1K x 16 0x0008 DC00 0x0008 DFFF 128 x 16 0x0108 1B80 0x0108 1BFF
Sector 56 1K x 16 0x0008 E000 0x0008 E3FF 128 x 16 0x0108 1C00 0x0108 1C7F
Sector 57 1K x 16 0x0008 E400 0x0008 E7FF 128 x 16 0x0108 1C80 0x0108 1CFF
Sector 58 1K x 16 0x0008 E800 0x0008 EBFF 128 x 16 0x0108 1D00 0x0108 1D7F
Sector 59 1K x 16 0x0008 EC00 0x0008 EFFF 128 x 16 0x0108 1D80 0x0108 1DFF
Sector 60 1K x 16 0x0008 F000 0x0008 F3FF 128 x 16 0x0108 1E00 0x0108 1E7F
Sector 61 1K x 16 0x0008 F400 0x0008 F7FF 128 x 16 0x0108 1E80 0x0108 1EFF
Sector 62 1K x 16 0x0008 F800 0x0008 FBFF 128 x 16 0x0108 1F00 0x0108 1F7F
Sector 63 1K x 16 0x0008 FC00 0x0008 FFFF 128 x 16 0x0108 1F80 0x0108 1FFF
F2800157-Q1,

F2800157,

F2800156-Q1

Sector 64 1K x 16 0x0009 0000 0x0009 03FF 128 x 16 0x0108 2000 0x0108 207F
Sector 65 1K x 16 0x0009 0400 0x0009 07FF 128 x 16 0x0108 2080 0x0108 20FF
Sector 66 1K x 16 0x0009 0800 0x0009 0BFF 128 x 16 0x0108 2100 0x0108 217F
Sector 67 1K x 16 0x0009 0C00 0x0009 0FFF 128 x 16 0x0108 2180 0x0108 21FF
Sector 68 1K x 16 0x0009 1000 0x0009 13FF 128 x 16 0x0108 2200 0x0108 227F
Sector 69 1K x 16 0x0009 1400 0x0009 17FF 128 x 16 0x0108 2280 0x0108 22FF
Sector 70 1K x 16 0x0009 1800 0x0009 1BFF 128 x 16 0x0108 2300 0x0108 237F
Sector 71 1K x 16 0x0009 1C00 0x0009 1FFF 128 x 16 0x0108 2380 0x0108 23FF
Sector 72 1K x 16 0x0009 2000 0x0009 23FF 128 x 16 0x0108 2400 0x0108 247F
Sector 73 1K x 16 0x0009 2400 0x0009 27FF 128 x 16 0x0108 2480 0x0108 24FF
Sector 74 1K x 16 0x0009 2800 0x0009 2BFF 128 x 16 0x0108 2500 0x0108 257F
Sector 75 1K x 16 0x0009 2C00 0x0009 2FFF 128 x 16 0x0108 2580 0x0108 25FF
Sector 76 1K x 16 0x0009 3000 0x0009 33FF 128 x 16 0x0108 2600 0x0108 267F
Sector 77 1K x 16 0x0009 3400 0x0009 37FF 128 x 16 0x0108 2680 0x0108 26FF
Sector 78 1K x 16 0x0009 3800 0x0009 3BFF 128 x 16 0x0108 2700 0x0108 277F
Sector 79 1K x 16 0x0009 3C00 0x0009 3FFF 128 x 16 0x0108 2780 0x0108 27FF
Sector 80 1K x 16 0x0009 4000 0x0009 43FF 128 x 16 0x0108 2800 0x0108 287F
Sector 81 1K x 16 0x0009 4400 0x0009 47FF 128 x 16 0x0108 2880 0x0108 28FF
Sector 82 1K x 16 0x0009 4800 0x0009 4BFF 128 x 16 0x0108 2900 0x0108 297F
Sector 83 1K x 16 0x0009 4C00 0x0009 4FFF 128 x 16 0x0108 2980 0x0108 29FF
Sector 84 1K x 16 0x0009 5000 0x0009 53FF 128 x 16 0x0108 2A00 0x0108 2A7F
Sector 85 1K x 16 0x0009 5400 0x0009 57FF 128 x 16 0x0108 2A80 0x0108 2AFF
Sector 86 1K x 16 0x0009 5800 0x0009 5BFF 128 x 16 0x0108 2B00 0x0108 2B7F
Sector 87 1K x 16 0x0009 5C00 0x0009 5FFF 128 x 16 0x0108 2B80 0x0108 2BFF
Sector 88 1K x 16 0x0009 6000 0x0009 63FF 128 x 16 0x0108 2C00 0x0108 2C7F
Sector 89 1K x 16 0x0009 6400 0x0009 67FF 128 x 16 0x0108 2C80 0x0108 2CFF
Sector 90 1K x 16 0x0009 6800 0x0009 6BFF 128 x 16 0x0108 2D00 0x0108 2D7F
Sector 91 1K x 16 0x0009 6C00 0x0009 6FFF 128 x 16 0x0108 2D80 0x0108 2DFF
Sector 92 1K x 16 0x0009 7000 0x0009 73FF 128 x 16 0x0108 2E00 0x0108 2E7F
Sector 93 1K x 16 0x0009 7400 0x0009 77FF 128 x 16 0x0108 2E80 0x0108 2EFF
Sector 94 1K x 16 0x0009 7800 0x0009 7BFF 128 x 16 0x0108 2F00 0x0108 2F7F
Sector 95 1K x 16 0x0009 7C00 0x0009 7FFF 128 x 16 0x0108 2F80 0x0108 2FFF
F2800157-Q1,

F2800157,

F2800156-Q1

Sector 96 1K x 16 0x0009 8000 0x0009 83FF 128 x 16 0x0108 3000 0x0108 307F
Sector 97 1K x 16 0x0009 8400 0x0009 87FF 128 x 16 0x0108 3080 0x0108 30FF
Sector 98 1K x 16 0x0009 8800 0x0009 8BFF 128 x 16 0x0108 3100 0x0108 317F
Sector 99 1K x 16 0x0009 8C00 0x0009 8FFF 128 x 16 0x0108 3180 0x0108 31FF
Sector 100 1K x 16 0x0009 9000 0x0009 93FF 128 x 16 0x0108 3200 0x0108 327F
Sector 101 1K x 16 0x0009 9400 0x0009 97FF 128 x 16 0x0108 3280 0x0108 32FF
Sector 102 1K x 16 0x0009 9800 0x0009 9BFF 128 x 16 0x0108 3300 0x0108 337F
Sector 103 1K x 16 0x0009 9C00 0x0009 9FFF 128 x 16 0x0108 3380 0x0108 33FF
Sector 104 1K x 16 0x0009 A000 0x0009 A3FF 128 x 16 0x0108 3400 0x0108 347F
Sector 105 1K x 16 0x0009 A400 0x0009 A7FF 128 x 16 0x0108 3480 0x0108 34FF
Sector 106 1K x 16 0x0009 A800 0x0009 ABFF 128 x 16 0x0108 3500 0x0108 357F
Sector 107 1K x 16 0x0009 AC00 0x0009 AFFF 128 x 16 0x0108 3580 0x0108 35FF
Sector 108 1K x 16 0x0009 B000 0x0009 B3FF 128 x 16 0x0108 3600 0x0108 367F
Sector 109 1K x 16 0x0009 B400 0x0009 B7FF 128 x 16 0x0108 3680 0x0108 36FF
Sector 110 1K x 16 0x0009 B800 0x0009 BBFF 128 x 16 0x0108 3700 0x0108 377F
Sector 111 1K x 16 0x0009 BC00 0x0009 BFFF 128 x 16 0x0108 3780 0x0108 37FF
Sector 112 1K x 16 0x0009 C000 0x0009 C3FF 128 x 16 0x0108 3800 0x0108 387F
Sector 113 1K x 16 0x0009 C400 0x0009 C7FF 128 x 16 0x0108 3880 0x0108 38FF
Sector 114 1K x 16 0x0009 C800 0x0009 CBFF 128 x 16 0x0108 3900 0x0108 397F
Sector 115 1K x 16 0x0009 CC00 0x0009 CFFF 128 x 16 0x0108 3980 0x0108 39FF
Sector 116 1K x 16 0x0009 D000 0x0009 D3FF 128 x 16 0x0108 3A00 0x0108 3A7F
Sector 117 1K x 16 0x0009 D400 0x0009 D7FF 128 x 16 0x0108 3A80 0x0108 3AFF
Sector 118 1K x 16 0x0009 D800 0x0009 DBFF 128 x 16 0x0108 3B00 0x0108 3B7F
Sector 119 1K x 16 0x0009 DC00 0x0009 DFFF 128 x 16 0x0108 3B80 0x0108 3BFF
Sector 120 1K x 16 0x0009 E000 0x0009 E3FF 128 x 16 0x0108 3C00 0x0108 3C7F
Sector 121 1K x 16 0x0009 E400 0x0009 E7FF 128 x 16 0x0108 3C80 0x0108 3CFF
Sector 122 1K x 16 0x0009 E800 0x0009 EBFF 128 x 16 0x0108 3D00 0x0108 3D7F
Sector 123 1K x 16 0x0009 EC00 0x0009 EFFF 128 x 16 0x0108 3D80 0x0108 3DFF
Sector 124 1K x 16 0x0009 F000 0x0009 F3FF 128 x 16 0x0108 3E00 0x0108 3E7F
Sector 125 1K x 16 0x0009 F400 0x0009 F7FF 128 x 16 0x0108 3E80 0x0108 3EFF
Sector 126 1K x 16 0x0009 F800 0x0009 FBFF 128 x 16 0x0108 3F00 0x0108 3F7F
Sector 127 1K x 16 0x0009 FC00 0x0009 FFFF 128 x 16 0x0108 3F80 0x0108 3FFF