SLVS577E March   2007  – December 2014 TPS61200 , TPS61201 , TPS61202

PRODUCTION DATA.  

  1. 1 Features
  2. 2 Applications
  3. 3 Description
  4. 4 Typical Application
  5. 5 Revision History
  6. 6 Device Options
  7. 7 Pin Configuration and Functions
  8. 8 Specifications
    1. 8.1 Absolute Maximum Ratings
    2. 8.2 ESD Ratings
    3. 8.3 Recommended Operating Conditions
    4. 8.4 Thermal Information
    5. 8.5 Electrical Characteristics
    6. 8.6 Typical Characteristics
  9. 9 Parameter Measurement Information
  10. 10Detailed Description
    1. 10.1 Overview
    2. 10.2 Functional Block Diagram
    3. 10.3 Feature Description
      1. 10.3.1 Controller Circuit
        1. 10.3.1.1 Synchronous Operation
        2. 10.3.1.2 Down Regulation
        3. 10.3.1.3 Device Enable
        4. 10.3.1.4 Softstart and Short-Circuit Protection
        5. 10.3.1.5 Current Limit
        6. 10.3.1.6 Undervoltage Lockout
        7. 10.3.1.7 Thermal Shutdown
    4. 10.4 Device Functional Modes
      1. 10.4.1 Power Save Mode
      2. 10.4.2 Down Conversion Mode
  11. 11Application and Implementation
    1. 11.1 Application Information
    2. 11.2 Typical Application
      1. 11.2.1 Design Requirements
      2. 11.2.2 Detailed Design Procedure
        1. 11.2.2.1 Programming the Output Voltage
        2. 11.2.2.2 Programming the UVLO Threshold Voltage
        3. 11.2.2.3 Inductor Selection
        4. 11.2.2.4 Capacitor Selection
          1. 11.2.2.4.1 Input Capacitor
          2. 11.2.2.4.2 Output Capacitor
          3. 11.2.2.4.3 Capacitor at VAUX
      3. 11.2.3 Application Curves
    3. 11.3 System Examples
  12. 12Power Supply Recommendations
  13. 13Layout
    1. 13.1 Layout Guidelines
    2. 13.2 Layout Example
    3. 13.3 Thermal Considerations
  14. 14Device and Documentation Support
    1. 14.1 Related Links
    2. 14.2 Trademarks
    3. 14.3 Electrostatic Discharge Caution
    4. 14.4 Glossary
  15. 15Mechanical, Packaging, and Orderable Information

Package Options

Mechanical Data (Package|Pins)
Thermal pad, mechanical data (Package|Pins)
Orderable Information

8 Specifications

8.1 Absolute Maximum Ratings

over operating free-air temperature range (unless otherwise noted)(1)
MIN MAX UNIT
VIN Input voltage range on VIN, L, VAUX, VOUT, PS, EN, FB, UVLO –0.3 7 V
TJ Operating junction temperature –40 150 °C
Tstg Storage temperature –65 150 °C
(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating Conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

8.2 ESD Ratings

VALUE UNIT
V(ESD) Electrostatic discharge Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001(1) ±4000 V
Charged-device model (CDM), per JEDEC specification JESD22-C101(2) ±1500
Machine Model (MM)(3) ±200
(1) JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process. Manufacturing with less than 500-V HBM is possible with the necessary precautions.
(2) JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process. Manufacturing with less than 250-V CDM is possible with the necessary precautions.
(3) ESD testing is performed according to the respective JESD22 JEDEC standard.

8.3 Recommended Operating Conditions

MIN NOM MAX UNIT
VIN Input voltage at VIN 0.3 5.5 V
TA Operating free air temperature range –40 85 °C
TJ Operating junction temperature range –40 125 °C

8.4 Thermal Information

THERMAL METRIC(1) TPS6120x UNIT
DRC DSC
10 PINS 10 PINS
RθJA Junction-to-ambient thermal resistance 41.2 40.4 °C/W
RθJC(top) Junction-to-case (top) thermal resistance 62.8 37.8
RθJB Junction-to-board thermal resistance 16.6 15.4
ψJT Junction-to-top characterization parameter 1.2 0.3
ψJB Junction-to-board characterization parameter 16.8 15.6
RθJC(bot) Junction-to-case (bottom) thermal resistance 4.1 2.8
(1) For more information about traditional and new thermal metrics, see the IC Package Thermal Metrics application report, SPRA953.

8.5 Electrical Characteristics

over recommended junction temperature range and over recommended input voltage range (typical at an ambient temperature range of 25°C) (unless otherwise noted)
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
DC-DC STAGE
VIN Input voltage range 0.3 5.5 V
VIN Minimum input voltage at startup 0.5 V
VOUT TPS61200 output voltage range 1.8 5.5 V
VFB TPS61200 feedback voltage 495 500 505 mV
VOUT TPS61201 output voltage VIN < VOUT, PS = High 3.27 3.3 3.33 V
VOUT TPS61202 output voltage VIN < VOUT, PS = High 4.95 5.0 5.05 V
f Oscillator frequency 1250 1650 kHz
ILIM average inductor current limit VOUT = 3.3 V 1200 1350 1500 mA
RDS(on) Rectifying switch on resistance VOUT = 3.3 V 180 mΩ
RDS(on) Main switch on resistance VOUT = 3.3 V 150 mΩ
Line regulation VIN < VOUT, PS = High 0.1% 0.5%
Load regulation VIN < VOUT, PS = High 0.1% 0.5%
IQ Quiescent current VIN IO = 0 mA, VEN = VIN = 1.2 V,
VOUT = 3.3 V, VAUX = 3.3 V
PS = Low		 1 2 μA
VOUT 50 70 μA
VAUX 4 6 μA
ISD Shutdown current VIN VEN = 0 V, VIN = 1.2 V 0.5 1.5 μA
VAUX 1 2 μA
ILKG Input leakage current ( L) VEN = 0 V, VIN = 1.2 V, VL = 1.2 V 0.01 1 μA
CONTROL STAGE
VAUX Auxiliary Output Voltage 2.4 5.5 V
VIL Low level input threshold voltage (EN) VIN < 0.8 V 0.1 × VIN V
VIH High level input threshold voltage (EN) VIN < 0.8 V 0.9 × VIN V
VIL Low level input threshold voltage (EN) 0.8 V ≤ VIN ≤ 1.5 V 0.2 × VIN V
VIH High level input threshold voltage (EN) 0.8 V ≤ VIN ≤ 1.5 V 0.8 × VIN V
VIL Low level input threshold voltage (EN) VIN > 1.5 V 0.4 V
VIH High level input threshold voltage (EN) VIN > 1.5 V 1.2 V
VIL Low level input threshold voltage (PS) 0.4 V
VIH High level input threshold voltage (PS) 1.2 V
ILKG Input leakage current (EN, PS) EN, PS = GND or VIN 0.01 0.1 μA
VUVLO Undervoltage lockout threshold Falling UVLO voltage 235 250 265 mV
VUVLO Undervoltage lockout threshold Rising UVLO voltage 330 350 370 mV
ILKG Input leakage current (UVLO) VUVLO = 0.5 V 0.3 μA
VOVP Overvoltage protection threshold 5.5 7 V
Thermal shutdown temperature Rising temperature 140 °C
Thermal shutdown temperature hysteresis 20 °C

8.6 Typical Characteristics

Table 1. Table of Graphs

FIGURE
Maximum output current vs Input voltage Figure 1
Efficiency vs Output current (TPS61200), Power Save Enabled Figure 2
vs Output current (TPS61200), Power Save Disabled Figure 3
vs Output current (TPS61201), Power Save Enabled Figure 4
vs Output current (TPS61201), Power Save Disabled Figure 5
vs Output current (TPS61202), Power Save Enabled Figure 6
vs Output current (TPS61202), Power Save Disabled Figure 7
vs Input voltage (TPS61201), Power Save Enabled Figure 8
vs Input voltage (TPS61201), Power Save Disabled Figure 9
vs Input voltage (TPS61202), Power Save Enabled Figure 10
vs Input voltage (TPS61202), Power Save Disabled Figure 11
Output voltage vs Output current (TPS61201) Figure 12
vs Output current (TPS61202) Figure 13
tc1_lvs577.gif
Figure 1. Maximum Output Current vs Input Voltage
tc3_lvs577.gif
Figure 3. Efficiency vs Output Current
tc5_lvs577.gif
Figure 5. Efficiency vs Output Current
tc7_lvs577.gif
Figure 7. Efficiency vs Output Current
tc9_lvs577.gif
Figure 9. Efficiency vs Input Voltage
tc11_lvs577.gif
Figure 11. Efficiency vs Input Voltage
vo2_io_lvs577.gif
Figure 13. Output Voltage vs Output Current
tc2_lvs577.gif
Figure 2. Efficiency vs Output Current
tc4_lvs577.gif
Figure 4. Efficiency vs Output Current
tc6_lvs577.gif
Figure 6. Efficiency vs Output Current
tc8_lvs577.gif
Figure 8. Efficiency vs Input Voltage
tc10_lvs577.gif
Figure 10. Efficiency vs Input Voltage
vo_io_lvs577.gif
Figure 12. Output Voltage vs Output Current