SCDS214 Data sheet

SCDS214F October 2005 – December 2021 TS5A3359

PRODUCTION DATA

Package Options

Mechanical Data (Package|Pins)

YZP|8
- MXBG020L
DCU|8
- MPDS050E

Thermal pad, mechanical data (Package|Pins)

Orderable Information

6.1 Absolute Maximum Ratings

over operating free-air temperature range (unless otherwise noted)⁽¹⁾⁽²⁾

			MIN	MAX	UNIT
V_CC	Supply voltage⁽³⁾		–0.5	6.5	V
V_NO V_COM	Analog voltage⁽³⁾ ⁽⁴⁾ ⁽⁵⁾		–0.5	V_CC + 0.5	V
I_K	Analog port diode current	V_NO, V_COM < 0	–50		mA
I_NO I_COM	On-state switch current	V_NO, V_COM = 0 to V_CC	–200	200	mA
I_NO I_COM	On-state switch current	V_NO, V_COM = 0 to V_CC	–400	400	mA
V_I	Digital input voltage⁽³⁾ ⁽⁴⁾		–0.5	6.5	V
I_IK	Digital input clamp current	V_I < 0	–50		mA
I_CC	Continuous current through V_CC			100	mA
I_GND	Continuous current through GND		–100	100	mA
T_stg	Storage temperature		–65	150	°C
T_J	Junction temperature			150	°C

(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

(2) The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum

(3) All voltages are with respect to ground, unless otherwise specified.

(4) The input and output voltage ratings may be exceeded if the input and output clamp-current ratings are observed.

(5) This value is limited to 5.5-V maximum.