JAJSFC6C May 2015 – April 2018 ADS52J90
PRODUCTION DATA.
15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 |
0 | LVDS_RATE_
2X |
0 | 0 | 0 | 0 | 0 | 0 |
R/W-0h | R/W-0h | R/W-0h | R/W-0h | R/W-0h | R/W-0h | R/W-0h | R/W-0h |
7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
SEL_CH[2] | EN_JESD | DIS_LVDS | SEL_CH[1] | 0 | SEL_CH[0] | 0 | GLOBAL_PDN |
R/W-0h | R/W-0h | R/W-0h | R/W-0h | R/W-0h | R/W-0h | R/W-0h | R/W-0h |
LEGEND: R/W = Read/Write; -n = value after reset |
Bit | Field | Type | Reset | Description |
---|---|---|---|---|
15 | 0 | R/W | 0h | Must write 0 |
14 | LVDS_RATE_2X | R/W | 0h | 0 = 1X rate; normal operation (default)
1 = 2X rate. This setting combines the data of two LVDS pairs into a single LVDS pair. This feature can be used when the ADC clock rate is low. |
13-8 | 0 | R/W | 0h | Must write 0 |
7 | SEL_CH[2] | R/W | 0h | Input mode selection bit 3. Table 49 lists bit settings for the three input modes. |
6 | EN_JESD | R/W | 0h | 0 = JESD interface disabled
1 = JESD interface enabled; see Table 49 |
5 | DIS_LVDS | R/W | 0h | 0 = LVDS interface is enabled (default)
1 = LVDS interface is disabled |
4 | SEL_CH[1] | R/W | 0h | Input mode selection bit 2. Table 49 lists bit settings for the three input modes. |
3 | 0 | R/W | 0h | Must write 0 |
2 | SEL_CH[0] | R/W | 0h | Input mode selection bit 1. Table 49 lists bit settings for the three input modes. |
1 | 0 | R/W | 0h | Must write 0 |
0 | GLOBAL_PDN | R/W | 0h | 0 = The device operates in normal mode (default)
1 = ADC enters complete power-down mode |
INPUT MODE | SEL_CH[2] | SEL_CH[1] | SEL_CH[0] |
---|---|---|---|
8-channel input | 1 | 1 | 1 |
16-channel input | 0 | 1 | 1 |
32-channel input | 0 | 0 | 0 |