SBASB81 December   2024 AFE5401-EP

PRODUCTION DATA  

  1.   1
  2. 1 Features
  3. 2 Applications
  4. 3 Description
  5. 4 Pin Configuration and Functions
    1.     Pin Functions
  6. 5 Specifications
    1. 5.1  Absolute Maximum Ratings
    2. 5.2  ESD Ratings
    3. 5.3  Recommended Operating Conditions
    4. 5.4  Thermal Information
    5. 5.5  Electrical Characteristics
    6. 5.6  Digital Characteristics
    7. 5.7  Timing Requirements: Output Interface
    8. 5.8  Timing Requirements: RESET
    9. 5.9  Timing Requirements: Serial Interface Operation
    10. 5.10 Typical Characteristics
  7. 6 Parameter Measurement Information
    1. 6.1 Timing Requirements: Across Output Serialization Modes
  8. 7 Detailed Description
    1. 7.1 Overview
    2. 7.2 Functional Block Diagram
    3. 7.3 Feature Description
      1. 7.3.1 Low-Noise Amplifier (LNA)
      2. 7.3.2 Programmable Gain Amplifier (PGA)
      3. 7.3.3 Antialiasing Filter
      4. 7.3.4 Analog-to-Digital Converter (ADC)
      5. 7.3.5 Digital Gain
      6. 7.3.6 Input Clock Divider
      7. 7.3.7 Data Output Serialization
      8. 7.3.8 Setting the Input Common-Mode Voltage for the Analog Inputs
        1. 7.3.8.1 Main Channels
        2. 7.3.8.2 Auxiliary Channel
    4. 7.4 Device Functional Modes
      1. 7.4.1 Equalizer Mode
      2. 7.4.2 Data Output Mode
        1. 7.4.2.1 Header
        2. 7.4.2.2 Test Pattern Mode
      3. 7.4.3 Parity
      4. 7.4.4 Standby, Power-Down Mode
      5. 7.4.5 Digital Filtering to Improve Stop-Band Attenuation
        1. 7.4.5.1 Decimate-by-2 Mode
        2. 7.4.5.2 Decimate-by-4 Mode
      6. 7.4.6 Diagnostic Mode
      7. 7.4.7 Signal Chain Probe
    5. 7.5 Programming
      1. 7.5.1 Serial Interface
      2. 7.5.2 Register Initialization
        1. 7.5.2.1 Register Write Mode
        2. 7.5.2.2 Register Read Mode
      3. 7.5.3 CMOS Output Interface
        1. 7.5.3.1 Synchronization and Triggering
    6. 7.6 Register Maps
      1. 7.6.1 Functional Register Map
      2. 7.6.2 Register Descriptions
  9. 8 Application and Implementation
    1. 8.1 Application Information
    2. 8.2 Typical Application
      1. 8.2.1 Design Requirements
      2. 8.2.2 Detailed Design Procedure
      3. 8.2.3 Application Curves
    3. 8.3 Power Supply Recommendations
      1. 8.3.1 Power Supply Sequencing
      2. 8.3.2 Power Supply Decoupling
    4. 8.4 Layout
      1. 8.4.1 Layout Guidelines
      2. 8.4.2 Layout Example
  10. 9 Revision History
  11. 10Device and Documentation Support
    1. 10.1 Documentation Support
      1. 10.1.1 Related Documentation
    2. 10.2 Receiving Notification of Documentation Updates
    3. 10.3 Community Resources
    4. 10.4 Trademarks
  12. 11Mechanical, Packaging, and Orderable Information

パッケージ・オプション

メカニカル・データ（パッケージ｜ピン）
サーマルパッド・メカニカル・データ
発注情報

5.3 Recommended Operating Conditions

MINNOMMAXUNIT
TEMPERATURE
TAAmbient temperature range–40+105°C

TJ

Operating junction temperature

+125

°C
SUPPLIES
DRVDDOutput driver supply1.73.6V
AVDD33-V analog supply voltage33.33.6V
AVDD181.8-V analog supply voltage1.71.81.9V
DVDD181.8-V digital supply voltage1.71.81.9V
CLOCK INPUT
CLKINInput clock frequencyDefault mode (DIV_EN disabled)12.525MHz
With DIV_EN, DIV_FRC enabled and DIV_REG = 12550
With DIV_EN, DIV_FRC enabled and DIV_REG = 237.575
With DIV_EN, DIV_FRC enabled and DIV_REG = 350100
With decimate-by-2 or decimate-by-4 modes enabled (DIV_EN disabled)(1)12.550
VCLKINP – VCLKINMInput clock amplitude differentialSine wave, ac-coupled0.21.5VPP
LVPECL, ac-coupled0.21.6
LVDS, ac-coupled0.20.7
Single-ended CMOS clock on CLKINP with CLKINM connected to AVSS1.8V
Input clock duty cycle40%60%
DIGITAL OUTPUT
CLOADTolerable external load capacitance from each output pin to DRVSS5pF
(1) In decimation mode, input clock frequency (CLKIN) can be scaled up to maximum of 200 MHz with the input divider.