Typical values at TA = +25°C with
nominal supplies. Unless otherwise noted, TX input data rate = 491.52MSPS,
fDAC = 11796.48MSPS, interleave mode, AOUT = –1
dBFS, 1st Nyquist zone output, Internal PLL, fREF =
491.52MSPS, 24x Interpolation, DSA = 0 dB, Sin(x)/x enabled, DSA calibrated.
![AFE7900 TX Full Scale vs RF Frequency and Channel at 11796.48MSPS GUID-20201210-CA0I-GM24-XDKG-J8NK4XDZMRBJ-low.gif](/ods/images/JAJSMP4B/GUID-20201210-CA0I-GM24-XDKG-J8NK4XDZMRBJ-low.gif)
Excluding PCB and cable losses, Aout = -0.5dBFS, DSA = 0, 4.9 GHz matching |
Figure 5-475 TX Full Scale vs RF Frequency and Channel at 11796.48MSPS![AFE7900 TX Full Scale vs RF Frequency and Channel at 8847.36MSPS, Mix Mode, 2nd Nyquist Zone GUID-20201210-CA0I-5PHT-VWHM-JHLJN5RMPFZ8-low.gif](/ods/images/JAJSMP4B/GUID-20201210-CA0I-5PHT-VWHM-JHLJN5RMPFZ8-low.gif)
Excluding PCB and cable losses, Aout = -0.5dBFS, DSA = 0, 4.9 GHz matching |
Figure 5-477 TX Full Scale vs RF Frequency and Channel at 8847.36MSPS, Mix Mode, 2nd Nyquist Zone![AFE7900 TX Full Scale Output Power vs Temperature and Channel at 4.9 GHz GUID-20201210-CA0I-2SQR-H9DP-JMF4CTN0JBT6-low.gif](/ods/images/JAJSMP4B/GUID-20201210-CA0I-2SQR-H9DP-JMF4CTN0JBT6-low.gif)
Aout = -0.5dBFS, 4.9 GHz Matching, PCB and cable losses included. |
|
Figure 5-479 TX Full Scale Output Power vs Temperature and Channel at 4.9 GHz![AFE7900 TX Calibrated Differential Gain Error vs DSA Setting and Channel at 4.9 GHz GUID-20201214-CA0I-BTK8-GPJ5-RQP35PT3R8P0-low.gif](/ods/images/JAJSMP4B/GUID-20201214-CA0I-BTK8-GPJ5-RQP35PT3R8P0-low.gif)
fDAC=11796.48MSPS, interleave mode, matching at 4.9 GHz |
Differential Gain Error = POUT(DSA Setting – 1) – POUT(DSA Setting) + 1 |
Figure 5-481 TX Calibrated Differential Gain Error vs DSA Setting and Channel at 4.9 GHz![AFE7900 TX Calibrated Integrated Gain Error vs DSA Setting and Channel at 4.9 GHz GUID-20201214-CA0I-3H6M-QZ87-XVGR5XDWVXWX-low.gif](/ods/images/JAJSMP4B/GUID-20201214-CA0I-3H6M-QZ87-XVGR5XDWVXWX-low.gif)
fDAC = 11796.48MSPS, interleave mode, matching at 4.9 GHz |
Integrated Gain Error = POUT(DSA Setting) – POUT(DSA Setting = 0) + (DSA Setting) |
Figure 5-483 TX Calibrated Integrated Gain Error vs DSA Setting and Channel at 4.9 GHz![AFE7900 TX Calibrated Differential Gain Error vs DSA Setting and Temperature at 4.9 GHz GUID-20201214-CA0I-MQRT-CJ8M-2VZQKNTL4JD6-low.gif](/ods/images/JAJSMP4B/GUID-20201214-CA0I-MQRT-CJ8M-2VZQKNTL4JD6-low.gif)
fDAC = 11796.48MSPS, interleaved mode, matching at 4.9 GHz |
Differential Gain Error = POUT(DSA Setting – 1) – POUT(DSA Setting) + 1 |
Figure 5-485 TX Calibrated Differential Gain Error vs DSA Setting and Temperature at 4.9 GHz![AFE7900 TX Calibrated Integrated Gain Error vs DSA Setting and Temperature at 4.9 GHz GUID-20201214-CA0I-DL68-DS9M-TRXHLDJQ9D4M-low.gif](/ods/images/JAJSMP4B/GUID-20201214-CA0I-DL68-DS9M-TRXHLDJQ9D4M-low.gif)
fDAC = 11796.48MSPS, interleaved mode, matching at 4.9 GHz |
Integrated Gain Error = POUT(DSA Setting) – POUT(DSA Setting = 0) + (DSA Setting) |
Figure 5-487 TX Calibrated Integrated Gain Error vs DSA Setting and Temperature at 4.9 GHz![AFE7900 TX Calibrated Differential Phase Error vs DSA Setting and Channel at 4.9 GHz GUID-20201214-CA0I-8ZFC-JDJD-S15T6PTRWLXV-low.gif](/ods/images/JAJSMP4B/GUID-20201214-CA0I-8ZFC-JDJD-S15T6PTRWLXV-low.gif)
fDAC = 11796.48MSPS, interleaved mode, matching at 4.9 GHz |
Differential Phase Error = PhaseOUT(DSA Setting – 1) – PhaseOUT(DSA Setting) |
Phase DNL spike may occur at any DSA setting. |
Figure 5-489 TX Calibrated Differential Phase Error vs DSA Setting and Channel at 4.9 GHz![AFE7900 TX Calibrated Integrated Phase Error vs DSA Setting and Channel at 4.9 GHz GUID-20201214-CA0I-68L3-CGPR-B4SF3KLCP2PV-low.gif](/ods/images/JAJSMP4B/GUID-20201214-CA0I-68L3-CGPR-B4SF3KLCP2PV-low.gif)
fDAC = 11796.48MSPS, interleaved mode, matching at 4.9 GHz |
Integrated Phase Error = Phase(DSA Setting) – Phase(DSA Setting = 0) |
Figure 5-491 TX Calibrated Integrated Phase Error vs DSA Setting and Channel at 4.9 GHz![AFE7900 TX Calibrated Differential Phase Error vs DSA Setting and Temperature at 4.9 GHz GUID-20201214-CA0I-SVKS-ZQNV-ZQ4L5CHHCM7B-low.gif](/ods/images/JAJSMP4B/GUID-20201214-CA0I-SVKS-ZQNV-ZQ4L5CHHCM7B-low.gif)
fDAC = 11796.48MSPS, interleaved mode, matching at 4.9 GHz |
Differential Phase Error = PhaseOUT(DSA Setting – 1) – PhaseOUT(DSA Setting) |
Figure 5-493 TX Calibrated Differential Phase Error vs DSA Setting and Temperature at 4.9 GHz![AFE7900 TX Calibrated Integrated Phase Error vs DSA Setting and Temperature at 4.9 GHz GUID-20201214-CA0I-NRJS-6QXR-M9HRL6TKGZ2G-low.gif](/ods/images/JAJSMP4B/GUID-20201214-CA0I-NRJS-6QXR-M9HRL6TKGZ2G-low.gif)
fDAC = 11796.48MSPS, interleaved mode, matching at 4.9 GHz |
Integrated Phase Error = Phase(DSA Setting) – Phase(DSA Setting = 0) |
Figure 5-495 TX Calibrated Integrated Phase Error vs DSA Setting and Temperature at 4.9 GHz![AFE7900 TX NSD vs Output Frequency and Digital Amplitude at 4.9 GHz (DSA=0dB) GUID-20201210-CA0I-5KCG-CJ38-XDMTG2HRKV1W-low.gif](/ods/images/JAJSMP4B/GUID-20201210-CA0I-5KCG-CJ38-XDMTG2HRKV1W-low.gif)
fDAC=11796.48MSPS, interleave mode, matching at 4.9GHz, Aout = –13 dBFS. |
|
Figure 5-497 TX NSD vs Output Frequency and Digital Amplitude at 4.9 GHz (DSA=0dB)![AFE7900 TX IMD3 vs DSA Setting at 4.9 GHz GUID-20201210-CA0I-XPWB-G57J-1RM82GHD07ZS-low.gif](/ods/images/JAJSMP4B/GUID-20201210-CA0I-XPWB-G57J-1RM82GHD07ZS-low.gif)
fDAC = 11796.48MSPS, interleaved mode, matching at 4.9 GHz, fCENTER = 4.9GHz, -13 dBFS each tone |
Figure 5-499 TX IMD3 vs DSA Setting at 4.9 GHz![AFE7900 TX IMD3 vs Tone Spacing and Temperature at 4.9 GHz GUID-20201210-CA0I-K9CG-TTV4-VLGL0NMV4KSJ-low.gif](/ods/images/JAJSMP4B/GUID-20201210-CA0I-K9CG-TTV4-VLGL0NMV4KSJ-low.gif)
fDAC = 11796.48MSPS, interleaved mode, matching at 4.9 GHz, fCENTER = 4.9GHz, –13 dBFS each tone, worst channel |
Figure 5-501 TX IMD3 vs Tone Spacing and Temperature at 4.9 GHz![AFE7900 TX 20-MHz LTE Output Spectrum at 4.9 GHz GUID-20201215-CA0I-CKVH-69WF-HGWNHX1HS75L-low.png](/ods/images/JAJSMP4B/GUID-20201215-CA0I-CKVH-69WF-HGWNHX1HS75L-low.png)
TM1.1, POUT_RMS = –13 dBFS |
Figure 5-503 TX 20-MHz LTE Output Spectrum at 4.9 GHz![AFE7900 TX 20-MHz LTE ACPR vs Digital Level at 4.9 GHz GUID-20201210-CA0I-HJ8M-JHQG-90N6VX0T4XZX-low.gif](/ods/images/JAJSMP4B/GUID-20201210-CA0I-HJ8M-JHQG-90N6VX0T4XZX-low.gif)
Matching at 4.9 GHz, single carrier 20-MHz BW TM1.1 LTE |
Figure 5-505 TX 20-MHz LTE ACPR vs Digital Level at 4.9 GHz![AFE7900 TX 100-MHz NR ACPR vs Digital Level at 4.9 GHz GUID-20201210-CA0I-DKPL-PKJV-7KS2RJ3WL3RL-low.gif](/ods/images/JAJSMP4B/GUID-20201210-CA0I-DKPL-PKJV-7KS2RJ3WL3RL-low.gif)
Matching at 4.9 GHz, single carrier 100-MHz BW TM1.1 NR |
Figure 5-507 TX 100-MHz NR ACPR vs Digital Level at 4.9 GHz![AFE7900 TX 20-MHz LTE ACPR vs DSA at 4.9 GHz GUID-20201210-CA0I-MZ6K-SL3T-0MTCQP5KS9QC-low.gif](/ods/images/JAJSMP4B/GUID-20201210-CA0I-MZ6K-SL3T-0MTCQP5KS9QC-low.gif)
Matching at 4.9 GHz, single carrier 20-MHz BW TM1.1 LTE |
Figure 5-509 TX 20-MHz LTE ACPR vs DSA at 4.9 GHz![AFE7900 TX 100-MHz NR ACPR vs DSA at 4.9 GHz GUID-20201210-CA0I-142R-CRSP-JMDX5ZV0VT5V-low.gif](/ods/images/JAJSMP4B/GUID-20201210-CA0I-142R-CRSP-JMDX5ZV0VT5V-low.gif)
Matching at 4.9 GHz, single carrier 100-MHz BW TM1.1 NR |
Figure 5-511 TX 100-MHz NR ACPR vs DSA at 4.9 GHz![AFE7900 TX HD2 vs Digital Amplitude and Output Frequency at 4.9 GHz GUID-20201210-CA0I-DSBF-CCQM-NVNXQD7Z4DLX-low.gif](/ods/images/JAJSMP4B/GUID-20201210-CA0I-DSBF-CCQM-NVNXQD7Z4DLX-low.gif)
Matching at 4.9 GHz, fDAC = 11.79648GSPS, interleave mode, normalized to output power at harmonic frequency |
Figure 5-513 TX HD2 vs Digital Amplitude and Output Frequency at 4.9 GHz![AFE7900 TX Single Tone (–1 dBFS) Output Spectrum at 4.9 GHz (0-fDAC) GUID-20210414-CA0I-MD8M-VQRP-DMNJDJQLP08Q-low.png](/ods/images/JAJSMP4B/GUID-20210414-CA0I-MD8M-VQRP-DMNJDJQLP08Q-low.png)
fDAC = 11796.48MSPS, interleave mode, 4.9 GHz matching, includes PCB and cable losses. ILn = fS/n ± fOUT. |
Figure 5-515 TX Single Tone (–1 dBFS) Output Spectrum at 4.9 GHz (0-fDAC)![AFE7900 TX Single Tone (–6 dBFS) Output Spectrum at 4.9 GHz (0-fDAC) GUID-20210414-CA0I-HG2M-SZBM-SP7NMFBTHKQB-low.png](/ods/images/JAJSMP4B/GUID-20210414-CA0I-HG2M-SZBM-SP7NMFBTHKQB-low.png)
fDAC = 11796.48MSPS, interleave mode, 4.9 GHz matching, includes PCB and cable losses. ILn = fS/n ± fOUT. |
Figure 5-517 TX Single Tone (–6 dBFS) Output Spectrum at 4.9 GHz (0-fDAC)![AFE7900 TX Single Tone (–12 dBFS) Output Spectrum at 4.9 GHz (0-fDAC) GUID-20210414-CA0I-TNC7-KSVD-4GTPJR21JNLP-low.png](/ods/images/JAJSMP4B/GUID-20210414-CA0I-TNC7-KSVD-4GTPJR21JNLP-low.png)
fDAC = 11796.48MSPS, interleave mode, 4.9 GHz matching, includes PCB and cable losses. ILn = fS/n ± fOUT. |
Figure 5-519 TX Single Tone (–12 dBFS) Output Spectrum at 4.9 GHz (0-fDAC)![AFE7900 TX Full Scale vs RF Frequency and Channel at 5898.24MSPS, Mix Mode, 2nd Nyquist Zone GUID-20201210-CA0I-XZRD-4VCK-PKFHKCNQXBQM-low.gif](/ods/images/JAJSMP4B/GUID-20201210-CA0I-XZRD-4VCK-PKFHKCNQXBQM-low.gif)
Excluding PCB and cable losses, Aout = -0.5dBFS, DSA = 0, 4.9 GHz matching |
Figure 5-476 TX Full Scale vs RF Frequency and Channel at 5898.24MSPS, Mix Mode, 2nd Nyquist Zone![AFE7900 TX Output Power vs DSA Setting and Channel at 4.9 GHz GUID-20201210-CA0I-0N03-XZW4-ZC7VNJWLBLTM-low.gif](/ods/images/JAJSMP4B/GUID-20201210-CA0I-0N03-XZW4-ZC7VNJWLBLTM-low.gif)
fDAC = 11796.48 MSPS, Aout = -0.5dBFS, matching 4.9 GHz |
|
Figure 5-478 TX Output Power vs DSA Setting and Channel at 4.9 GHz![AFE7900 TX Uncalibrated Differential Gain Error vs DSA Setting and Channel at 4.9 GHz GUID-20201214-CA0I-PNMP-WXMZ-HHLRRL6XTTDB-low.gif](/ods/images/JAJSMP4B/GUID-20201214-CA0I-PNMP-WXMZ-HHLRRL6XTTDB-low.gif)
fDAC=11796.48MSPS, interleave mode, matching at 4.9 GHz |
Differential Gain Error = POUT(DSA Setting – 1) – POUT(DSA Setting) + 1 |
Figure 5-480 TX Uncalibrated Differential Gain Error vs DSA Setting and Channel at 4.9 GHz![AFE7900 TX Uncalibrated Integrated Gain Error vs DSA Setting and Channel at 4.9 GHz GUID-20201214-CA0I-RQTS-TKLP-5L6HJKVW84FL-low.gif](/ods/images/JAJSMP4B/GUID-20201214-CA0I-RQTS-TKLP-5L6HJKVW84FL-low.gif)
fDAC=11796.48MSPS, interleave mode, matching at 4.9 GHz |
Integrated Gain Error = POUT(DSA Setting) – POUT(DSA Setting = 0) + (DSA Setting) |
Figure 5-482 TX Uncalibrated Integrated Gain Error vs DSA Setting and Channel at 4.9 GHz![AFE7900 TX Uncalibrated Differential Gain Error vs DSA Setting and Temperature at 4.9 GHz GUID-20201214-CA0I-MFHM-K1TV-PTRSMMGJQJ7V-low.gif](/ods/images/JAJSMP4B/GUID-20201214-CA0I-MFHM-K1TV-PTRSMMGJQJ7V-low.gif)
fDAC = 11796.48MSPS, interleaved mode, matching at 4.9 GHz |
Differential Gain Error = POUT(DSA Setting – 1) – POUT(DSA Setting) + 1 |
Figure 5-484 TX Uncalibrated Differential Gain Error vs DSA Setting and Temperature at 4.9 GHz![AFE7900 TX Uncalibrated Integrated Gain Error vs DSA Setting and Temperature at 4.9 GHz GUID-20201214-CA0I-8SWH-T7QV-SC2WVTT1PGQJ-low.gif](/ods/images/JAJSMP4B/GUID-20201214-CA0I-8SWH-T7QV-SC2WVTT1PGQJ-low.gif)
fDAC = 11796.48MSPS, interleaved mode, matching at 4.9 GHz |
Integrated Gain Error = POUT(DSA Setting) – POUT(DSA Setting = 0) + (DSA Setting) |
Figure 5-486 TX Uncalibrated Integrated Gain Error vs DSA Setting and Temperature at 4.9 GHz![AFE7900 TX Uncalibrated Differential Phase Error vs DSA Setting and Channel at 4.9 GHz GUID-20201214-CA0I-MHBN-4P8G-X5T196BR6GD9-low.gif](/ods/images/JAJSMP4B/GUID-20201214-CA0I-MHBN-4P8G-X5T196BR6GD9-low.gif)
fDAC = 11796.48MSPS, interleaved mode, matching at 4.9 GHz |
Differential Phase Error = PhaseOUT(DSA Setting – 1) – PhaseOUT(DSA Setting) |
Figure 5-488 TX Uncalibrated Differential Phase Error vs DSA Setting and Channel at 4.9 GHz![AFE7900 TX Uncalibrated Integrated Phase Error vs DSA Setting and Channel at 4.9 GHz GUID-20201214-CA0I-RMJG-TVLH-MFVCZZQGN34X-low.gif](/ods/images/JAJSMP4B/GUID-20201214-CA0I-RMJG-TVLH-MFVCZZQGN34X-low.gif)
fDAC = 11796.48MSPS, interleaved mode, matching at 4.9 GHz |
Integrated Phase Error = Phase(DSA Setting) – Phase(DSA Setting = 0) |
|
Figure 5-490 TX Uncalibrated Integrated Phase Error vs DSA Setting and Channel at 4.9 GHz![AFE7900 TX Uncalibrated Differential Phase Error vs DSA Setting and Temperature at 4.9 GHz GUID-20201214-CA0I-VJMJ-QCP2-3Q6GBTM36W3F-low.gif](/ods/images/JAJSMP4B/GUID-20201214-CA0I-VJMJ-QCP2-3Q6GBTM36W3F-low.gif)
fDAC = 11796.48MSPS, interleaved mode, matching at 4.9 GHz |
Differential Phase Error = PhaseOUT(DSA Setting – 1) – PhaseOUT(DSA Setting) |
Figure 5-492 TX Uncalibrated Differential Phase Error vs DSA Setting and Temperature at 4.9 GHz![AFE7900 TX Uncalibrated Integrated Phase Error vs DSA Setting and Temperature at 4.9 GHz GUID-20201214-CA0I-X9FM-DD6P-J4BQFT6GHGRR-low.gif](/ods/images/JAJSMP4B/GUID-20201214-CA0I-X9FM-DD6P-J4BQFT6GHGRR-low.gif)
fDAC = 11796.48MSPS, interleaved mode, matching at 4.9 GHz |
Integrated Phase Error = Phase(DSA Setting) – Phase(DSA Setting = 0) |
Figure 5-494 TX Uncalibrated Integrated Phase Error vs DSA Setting and Temperature at 4.9 GHz![AFE7900 TX Output Noise vs Channel and Attenuation at 4.9 GHz GUID-20210419-CA0I-1SS4-CJZC-1DPT9ND94CP8-low.gif](/ods/images/JAJSMP4B/GUID-20210419-CA0I-1SS4-CJZC-1DPT9ND94CP8-low.gif)
fDAC = 11796.48MSPS, interleaved mode, matching at 4.9 GHz, POUT = –13 dBFS |
|
|
Figure 5-496 TX Output Noise vs Channel and Attenuation at 4.9 GHz![AFE7900 TX NSD vs Output Frequency and Digital Amplitude at 4.9GHz (DSA=6dB) GUID-20201210-CA0I-CD95-FLBQ-VLFPB9456FRT-low.gif](/ods/images/JAJSMP4B/GUID-20201210-CA0I-CD95-FLBQ-VLFPB9456FRT-low.gif)
fDAC=11796.48MSPS, interleave mode, matching at 4.9GHz, Aout = –13 dBFS. |
|
Figure 5-498 TX NSD vs Output Frequency and Digital Amplitude at 4.9GHz (DSA=6dB)![AFE7900 TX IMD3 vs Tone Spacing and Channel at 4.9 GHz GUID-20201210-CA0I-1ZLZ-RNFH-QTJ4TKNTGRZT-low.gif](/ods/images/JAJSMP4B/GUID-20201210-CA0I-1ZLZ-RNFH-QTJ4TKNTGRZT-low.gif)
fDAC = 11796.48MSPS, interleaved mode, matching at 4.9 GHz, fCENTER = 4.9GHz, –13 dBFS each tone |
Figure 5-500 TX IMD3 vs Tone Spacing and Channel at 4.9 GHz![AFE7900 TX IMD3 vs Digital Level at 4.9 GHz GUID-20201210-CA0I-TTMJ-BVMN-S0DB64WNP4ZV-low.gif](/ods/images/JAJSMP4B/GUID-20201210-CA0I-TTMJ-BVMN-S0DB64WNP4ZV-low.gif)
fDAC = 11796.48MSPS, interleaved mode, matching at 4.9 GHz, fCENTER = 4.9GHz, fSPACING = 20 MHz |
Figure 5-502 TX IMD3 vs Digital Level at 4.9 GHz![AFE7900 TX 100-MHz NR Output Spectrum at 4.9 GHz GUID-20201215-CA0I-H4GB-J34L-S0RG9VB6MJXQ-low.png](/ods/images/JAJSMP4B/GUID-20201215-CA0I-H4GB-J34L-S0RG9VB6MJXQ-low.png)
TM1.1, POUT_RMS = –13 dBFS |
Figure 5-504 TX 100-MHz NR Output Spectrum at 4.9 GHz![AFE7900 TX 20-MHz LTE alt-ACPR vs Digital Level at 4.9 GHz GUID-20201210-CA0I-FVNB-MNWV-TWR6Z86HPLKF-low.gif](/ods/images/JAJSMP4B/GUID-20201210-CA0I-FVNB-MNWV-TWR6Z86HPLKF-low.gif)
Matching at 4.9 GHz, single carrier 20-MHz BW TM1.1 LTE |
Figure 5-506 TX 20-MHz LTE alt-ACPR vs Digital Level at 4.9 GHz![AFE7900 TX 100-MHz NR alt-ACPR vs Digital Level at 4.9 GHz GUID-20201210-CA0I-DKPL-PKJV-7KS2RJ3WL3RL-low.gif](/ods/images/JAJSMP4B/GUID-20201210-CA0I-DKPL-PKJV-7KS2RJ3WL3RL-low.gif)
Matching at 4.9 GHz, single carrier 100-MHz BW TM1.1 NR |
Figure 5-508 TX 100-MHz NR alt-ACPR vs Digital Level at 4.9 GHz![AFE7900 TX 20-MHz LTE alt-ACPR vs DSA at 4.9 GHz GUID-20201210-CA0I-WG9V-TGSC-4RHST37FRBTT-low.gif](/ods/images/JAJSMP4B/GUID-20201210-CA0I-WG9V-TGSC-4RHST37FRBTT-low.gif)
Matching at 4.9 GHz, single carrier 20-MHz BW TM1.1 LTE |
Figure 5-510 TX 20-MHz LTE alt-ACPR vs DSA at 4.9 GHz![AFE7900 TX 100-MHz NR alt-ACPR vs DSA at 4.9 GHz GUID-20201210-CA0I-FFQ2-GP2W-MNTNKNZF0PVF-low.gif](/ods/images/JAJSMP4B/GUID-20201210-CA0I-FFQ2-GP2W-MNTNKNZF0PVF-low.gif)
Matching at 4.9 GHz, single carrier 100-MHz BW TM1.1 NR |
|
Figure 5-512 TX 100-MHz NR alt-ACPR vs DSA at 4.9 GHz![AFE7900 TX HD3 vs Digital Amplitude and Output Frequency at 4.9 GHz GUID-20201210-CA0I-DBXK-L2PH-26V7ZHV6V0BB-low.gif](/ods/images/JAJSMP4B/GUID-20201210-CA0I-DBXK-L2PH-26V7ZHV6V0BB-low.gif)
Matching at 4.9 GHz, fDAC = 11.79648GSPS, interleave mode, normalized to output power at harmonic frequency |
|
Figure 5-514 TX HD3 vs Digital Amplitude and Output Frequency at 4.9 GHz![AFE7900 TX Single Tone (–1 dBFS) Output Spectrum at 4.9 GHz (±300 MHz) GUID-20210414-CA0I-D7LB-GPZ8-HWDDFZVBWC78-low.png](/ods/images/JAJSMP4B/GUID-20210414-CA0I-D7LB-GPZ8-HWDDFZVBWC78-low.png)
fDAC = 11796.48MSPS, interleave mode, 4.9 GHz matching, includes PCB and cable losses |
Figure 5-516 TX Single Tone (–1 dBFS) Output Spectrum at 4.9 GHz (±300 MHz)![AFE7900 TX Single Tone (–6 dBFS) Output Spectrum at 4.9 GHz (±300 MHz) GUID-20210414-CA0I-PZPW-BM7Q-VDZWPL7PFZTS-low.png](/ods/images/JAJSMP4B/GUID-20210414-CA0I-PZPW-BM7Q-VDZWPL7PFZTS-low.png)
fDAC = 11796.48MSPS, interleave mode, 4.9 GHz matching, includes PCB and cable losses |
Figure 5-518 TX Single Tone (–6 dBFS) Output Spectrum at 4.9 GHz (±300 MHz)![AFE7900 TX Single Tone (–12 dBFS) Output Spectrum at 4.9 GHz (±300 MHz) GUID-20210414-CA0I-JBBG-PFHL-ZFWQ9F64FVH8-low.png](/ods/images/JAJSMP4B/GUID-20210414-CA0I-JBBG-PFHL-ZFWQ9F64FVH8-low.png)
fDAC = 11796.48MSPS, interleave mode, 4.9 GHz matching, includes PCB and cable losses |
Figure 5-520 TX Single Tone (–12 dBFS) Output Spectrum at 4.9 GHz (±300 MHz)