JAJSPQ1 August   2024 AMC0106M05

ADVANCE INFORMATION  

  1.   1
  2. 1 特長
  3. 2 アプリケーション
  4. 3 概要
  5. 4 Pin Configuration and Functions
  6. 5 Specifications
    1. 5.1 Absolute Maximum Ratings
    2. 5.2 ESD Ratings
    3. 5.3 Recommended Operating Conditions
    4. 5.4 Thermal Information (DEN Package)
    5. 5.5 Package Characteristics
    6. 5.6 Electrical Characteristics
    7. 5.7 Switching Characteristics
    8. 5.8 Timing Diagrams
  7. 6 Detailed Description
    1. 6.1 Overview
    2. 6.2 Functional Block Diagram
    3. 6.3 Feature Description
      1. 6.3.1 Analog Input
      2. 6.3.2 Modulator
      3. 6.3.3 Isolation Channel Signal Transmission
      4. 6.3.4 Digital Output
        1. 6.3.4.1 Output Behavior in Case of a Full-Scale Input
        2. 6.3.4.2 Output Behavior in Case of a Missing High-Side Supply
    4. 6.4 Device Functional Modes
  8. 7 Application and Implementation
    1. 7.1 Application Information
    2. 7.2 Typical Application
      1. 7.2.1 Design Requirements
      2. 7.2.2 Detailed Design Procedure
        1. 7.2.2.1 Shunt Resistor Sizing
        2. 7.2.2.2 Input Filter Design
        3. 7.2.2.3 Bitstream Filtering
        4. 7.2.2.4 Designing the Bootstrap Supply
    3. 7.3 Best Design Practices
    4. 7.4 Power Supply Recommendations
    5. 7.5 Layout
      1. 7.5.1 Layout Guidelines
      2. 7.5.2 Layout Example
  9. 8 Device and Documentation Support
    1. 8.1 Documentation Support
      1. 8.1.1 Related Documentation
    2. 8.2 ドキュメントの更新通知を受け取る方法
    3. 8.3 サポート・リソース
    4. 8.4 Trademarks
    5. 8.5 静電気放電に関する注意事項
    6. 8.6 用語集
  10. 9 Revision History
  11. 10Mechanical, Packaging, and Orderable Information
    1. 10.1 Mechanical Data

パッケージ・オプション

メカニカル・データ（パッケージ｜ピン）
サーマルパッド・メカニカル・データ
発注情報

6.4 Device Functional Modes

The AMC0106M05 operates in one of the following states:

  • OFF-state: The low-side of the device (AVDD) is not supplied. The device is not responsive and DOUT is in high-impedance state. Internally, DOUT is clamped to DVDD and DGND by ESD protection diodes.
  • Missing high-side supply: DVDD is supplied within the 推奨動作条件 but VAVDD is below the AVDDUV threshold. The device outputs a constant bitstream of logic 0's as described in the Output Behavior in Case of a Missing High-Side Supply section.
  • Common-mode input violation: AVDD and DVDD are supplied within the respective recommended operating conditions. However, the common-mode input voltage VCM = (VINP + VINN) / 2 is outside the recommended operating conditions. The device outputs invalid data, independent of the differential input voltage VIN.
  • Differential input voltage range violation (full-scale input): VAVDD, VDVDD, and VCM are within the recommended operating conditions. However, the differential input voltage VIN = (VINP – VINN) exceeds the clipping voltage (|VIN| > |VClipping|). The device outputs a fixed pattern as described in the Output Behavior in Case of a Missing High-Side Supply section.
  • Normal operation: VAVDD, VDVDD, VCM, and VIN are within the recommended operating conditions. The device outputs a digital bitstream as explained in the Digital Output section.
Table 6-1 Device Operational Modes
OPERATING CONDITION VDVDD VAVDD VCM
(VINP + VINN) / 2		 VIN
(VINP – VINN)		 DEVICE
RESPONSE
OFF VDVDD < DVDDUV Don't care Don't care Don't care DOUT is in Hi-Z state. DOUT is clamped to DVDD and DGND by ESD protection diodes.
Missing high-side supply Valid(1) VAVDD < AVDDUV Don't care Don't care DOUT is constantly low
Common-mode input voltage range violation Valid(1) Valid(1) VCM < VCM, MIN or VCM > VCM, MAX Don't care Device outputs invalid data
Differential input voltage range violation Valid(1) Valid(1) Valid(1) |VIN| > VClipping Device outputs a single 1 or a single 0 every 128th clock cycle
Normal operation Valid(1) Valid(1) Valid(1) Valid(1) Normal Operation
(1) Valid means within recommended operating conditions.