JAJSMN8D December   2000  – August 2021 DCR021205 , DCR022405

PRODUCTION DATA  

  1. 1 特長
  2. 2 アプリケーション
  3. 3 概要
  4. 4 Revision History
  5. 5 Pin Configuration and Functions
  6. 6 Specifications
    1. 6.1 Absolute Maximum Ratings
    2. 6.2 ESD Ratings
    3. 6.3 Recommended Operating Conditions
    4. 6.4 Thermal Information
    5. 6.5 Electrical Characteristics
    6. 6.6 Typical Characteristics
  7. 7 Detailed Description
    1. 7.1 Overview
    2. 7.2 Functional Block Diagram
    3. 7.3 Feature Description
      1. 7.3.1 Isolation
        1. 7.3.1.1 Operation or Functional Isolation
        2. 7.3.1.2 Basic or Enhanced Isolation
        3. 7.3.1.3 Working Voltage
        4. 7.3.1.4 Isolation Voltage Rating
        5. 7.3.1.5 Repeated High-Voltage Isolation Testing
      2. 7.3.2 Power Stage
      3. 7.3.3 Oscillator and Watchdog
      4. 7.3.4 ERROR Flag
      5. 7.3.5 Synchronization
      6. 7.3.6 Construction
      7. 7.3.7 Decoupling – Ripple Reduction
    4. 7.4 Device Functional Modes
      1. 7.4.1 Device Disable and Enable
      2. 7.4.2 Regulated Output Disable and Enable
  8. 8 Application and Implementation
    1. 8.1 Application Information
      1. 8.1.1 DCR02 Single Voltage Output
      2. 8.1.2 Generating Two Positive Output Voltages
      3. 8.1.3 Generation of Dual Polarity Voltages from Two Self-Synchronized DCR02s
    2. 8.2 Typical Application
      1. 8.2.1 Design Requirements
      2. 8.2.2 Detailed Design Procedure
        1. 8.2.2.1 Input Capacitor
        2. 8.2.2.2 Output Capacitor
        3. 8.2.2.3 Filter Capacitor
        4. 8.2.2.4 ERROR Flag
      3. 8.2.3 Application Curves
  9. 9 Power Supply Recommendations
  10. 10Layout
    1. 10.1 Layout Guidelines
    2. 10.2 Layout Examples
    3. 10.3 Thermal Consideration
  11. 11Device and Documentation Support
    1. 11.1 Documentation Support
      1. 11.1.1 Related Documentation
    2. 11.2 Receiving Notification of Documentation Updates
    3. 11.3 サポート・リソース
    4. 11.4 Trademarks
    5. 11.5 Electrostatic Discharge Caution
    6. 11.6 Glossary
  12. 12Mechanical, Packaging, and Orderable Information

パッケージ・オプション

メカニカル・データ（パッケージ｜ピン）
サーマルパッド・メカニカル・データ
発注情報

7.4.1 Device Disable and Enable

Each of the DCR02 series devices can be disabled or enabled by driving the SYNC pin using an open-drain CMOS gate. If the SYNC pin is pulled low, the DCR02 becomes disabled. The disable time depends upon the external loading. The internal disable function is implemented in 2 µs. Removal of the pulldown causes the DCR02 to be enabled.

Capacitive loading on the SYNC pin must be minimized (≤ 3 pF) to prevent a reduction in the oscillator frequency. The External Synchronization of the DCP01/02 Series of DC/DC Converters Application Report (SBAA035) describes disable and enable control circuitry. This document contains information on how to null the effects of additional capacitance on the SYNC pin. The oscillator’s frequency can be measured at VREC, as this is the fundamental frequency of the ripple component.