JAJSII9E april   2020  – june 2023 DRA821U , DRA821U-Q1

PRODUCTION DATA  

  1.   1
  2. 特長
  3. アプリケーション
  4. 概要
    1. 3.1 機能ブロック図
  5. Revision History
  6. Device Comparison
    1. 5.1 Related Products
  7. Terminal Configuration and Functions
    1. 6.1 Pin Diagram
    2. 6.2 Pin Attributes
    3. 6.3 Signal Descriptions
      1. 6.3.1  ADC
        1. 6.3.1.1 MCU Domain
      2. 6.3.2  DDRSS
        1. 6.3.2.1 MAIN Domain
        2. 6.3.2.2 DDRSS Mapping
      3. 6.3.3  GPIO
        1. 6.3.3.1 MAIN Domain
        2. 6.3.3.2 WKUP Domain
      4. 6.3.4  I2C
        1. 6.3.4.1 MAIN Domain
        2. 6.3.4.2 MCU Domain
        3. 6.3.4.3 WKUP Domain
      5. 6.3.5  I3C
        1. 6.3.5.1 MAIN Domain
        2. 6.3.5.2 MCU Domain
      6. 6.3.6  MCAN
        1. 6.3.6.1 MAIN Domain
        2. 6.3.6.2 MCU Domain
      7. 6.3.7  MCSPI
        1. 6.3.7.1 MAIN Domain
        2. 6.3.7.2 MCU Domain
      8. 6.3.8  UART
        1. 6.3.8.1 MAIN Domain
        2. 6.3.8.2 MCU Domain
        3. 6.3.8.3 WKUP Domain
      9. 6.3.9  MDIO
        1. 6.3.9.1 MCU Domain
        2. 6.3.9.2 MAIN Domain
      10. 6.3.10 CPSW2G
        1. 6.3.10.1 MCU Domain
      11. 6.3.11 CPSW5G
        1. 6.3.11.1 MAIN Domain
      12. 6.3.12 ECAP
        1. 6.3.12.1 MAIN Domain
      13. 6.3.13 EQEP
        1. 6.3.13.1 MAIN Domain
      14. 6.3.14 EPWM
        1. 6.3.14.1 MAIN Domain
      15. 6.3.15 USB
        1. 6.3.15.1 MAIN Domain
      16. 6.3.16 SERDES
        1. 6.3.16.1 MAIN Domain
      17. 6.3.17 OSPI
        1. 6.3.17.1 MCU Domain
      18. 6.3.18 Hyperbus
        1. 6.3.18.1 MCU Domain
      19. 6.3.19 GPMC
        1. 6.3.19.1 MAIN Domain
      20. 6.3.20 MMC
        1. 6.3.20.1 MAIN Domain
      21. 6.3.21 CPTS
        1. 6.3.21.1 MAIN Domain
        2. 6.3.21.2 MCU Domain
      22. 6.3.22 MCASP
        1. 6.3.22.1 MAIN Domain
      23. 6.3.23 DMTIMER
        1. 6.3.23.1 MAIN Domain
        2. 6.3.23.2 MCU Domain
      24. 6.3.24 Emulation and Debug
        1. 6.3.24.1 MAIN Domain
      25. 6.3.25 System and Miscellaneous
        1. 6.3.25.1 Boot Mode Configuration
          1. 6.3.25.1.1 MAIN Domain
          2. 6.3.25.1.2 MCU Domain
        2. 6.3.25.2 Clock
          1. 6.3.25.2.1 MAIN Domain
          2. 6.3.25.2.2 WKUP Domain
        3. 6.3.25.3 System
          1. 6.3.25.3.1 MAIN Domain
          2. 6.3.25.3.2 WKUP Domain
          3. 6.3.25.3.3 VMON
        4. 6.3.25.4 EFUSE
      26. 6.3.26 Power Supply
    4. 6.4 Pin Multiplexing
    5. 6.5 Connections for Unused Pins
  8. Specifications
    1. 7.1 Absolute Maximum Ratings
    2. 7.2 ESD Ratings
    3. 7.3 Recommended Operating Conditions
    4. 7.4 Power-On-Hours (POH)
    5. 7.5 Operating Performance Points
    6. 7.6 Electrical Characteristics
      1. 7.6.1  I2C, Open-Drain, Fail-Safe (I2C OD FS) Electrical Characteristics
      2. 7.6.2  Fail-Safe Reset (FS Reset) Electrical Characteristics
      3. 7.6.3  HFOSC Electrical Characteristics
      4. 7.6.4  eMMCPHY Electrical Characteristics
      5. 7.6.5  SDIO Electrical Characteristics
      6. 7.6.6  ADC12BT Electrical Characteristics
      7. 7.6.7  LVCMOS Electrical Characteristics
      8. 7.6.8  USB2PHY Electrical Characteristics
      9. 7.6.9  SERDES Electrical Characteristics
      10. 7.6.10 DDR Electrical Characteristics
    7. 7.7 VPP Specifications for One-Time Programmable (OTP) eFuses
      1. 7.7.1 Recommended Operating Conditions for OTP eFuse Programming
      2. 7.7.2 Hardware Requirements
      3. 7.7.3 Programming Sequence
      4. 7.7.4 Impact to Your Hardware Warranty
    8. 7.8 Thermal Resistance Characteristics
      1. 7.8.1 Thermal Resistance Characteristics
    9. 7.9 Timing and Switching Characteristics
      1. 7.9.1 Timing Parameters and Information
      2. 7.9.2 Power Supply Sequencing
        1. 7.9.2.1 Power Supply Slew Rate Requirement
        2. 7.9.2.2 Combined MCU and Main Domains Power- Up Sequencing
        3. 7.9.2.3 Combined MCU and Main Domains Power- Down Sequencing
        4. 7.9.2.4 Independent MCU and Main Domains Power- Up Sequencing
        5. 7.9.2.5 Independent MCU and Main Domains Power- Down Sequencing
        6. 7.9.2.6 Independent MCU and Main Domains, Entry and Exit of MCU Only Sequencing
        7. 7.9.2.7 Independent MCU and Main Domains, Entry and Exit of DDR Retention State
        8. 7.9.2.8 Independent MCU and Main Domains, Entry and Exit of GPIO Retention Sequencing
      3. 7.9.3 System Timing
        1. 7.9.3.1 Reset Timing
        2. 7.9.3.2 Safety Signal Timing
        3. 7.9.3.3 Clock Timing
      4. 7.9.4 Clock Specifications
        1. 7.9.4.1 Input Clocks / Oscillators
          1. 7.9.4.1.1 WKUP_OSC0 Internal Oscillator Clock Source
            1. 7.9.4.1.1.1 Load Capacitance
            2. 7.9.4.1.1.2 Shunt Capacitance
          2. 7.9.4.1.2 WKUP_OSC0 LVCMOS Digital Clock Source
          3. 7.9.4.1.3 Auxiliary OSC1 Internal Oscillator Clock Source
            1. 7.9.4.1.3.1 Load Capacitance
            2. 7.9.4.1.3.2 Shunt Capacitance
          4. 7.9.4.1.4 Auxiliary OSC1 LVCMOS Digital Clock Source
          5. 7.9.4.1.5 Auxiliary OSC1 Not Used
          6. 7.9.4.1.6 WKUP_LF_CLKIN Internal Oscillator Clock Source
          7. 7.9.4.1.7 WKUP_LF_CLKIN Not Used
        2. 7.9.4.2 Output Clocks
        3. 7.9.4.3 PLLs
        4. 7.9.4.4 Recommended Clock and Control Signal Transition Behavior
        5. 7.9.4.5 Interface Clock Specifications
          1. 7.9.4.5.1 Interface Clock Terminology
          2. 7.9.4.5.2 Interface Clock Frequency
      5. 7.9.5 Peripherals
        1. 7.9.5.1  ATL
          1. 7.9.5.1.1 ATL_PCLK Timing Requirements
          2. 7.9.5.1.2 ATL_AWS[x] Timing Requirements
          3. 7.9.5.1.3 ATL_BWS[x] Timing Requirements
          4. 7.9.5.1.4 ATCLK[x] Switching Characteristics
        2. 7.9.5.2  CPSW2G
          1. 7.9.5.2.1 CPSW2G RMII Timings
            1. 7.9.5.2.1.1 Timing Requirements for RMII[x]_REFCLK – RMII Mode
            2. 7.9.5.2.1.2 Timing Requirements for RMII[x]_RXD[1:0], RMII[x]_CRS_DV, and RMII[x]_RXER – RMII Mode
            3. 7.9.5.2.1.3 Switching Characteristics for RMII[x]_TXD[1:0], and RMII[x]_TXEN – RMII Mode
          2. 7.9.5.2.2 CPSW2G RGMII Timings
            1. 7.9.5.2.2.1 Timing Requirements for RGMII[x]_RCLK – RGMII Mode
            2. 7.9.5.2.2.2 Timing Requirements for RGMII[x]_RD[3:0], and RGMII[x]_RCTL – RGMII Mode
            3. 7.9.5.2.2.3 Switching Characteristics for RGMII[x]_TCLK – RGMII Mode
            4. 7.9.5.2.2.4 Switching Characteristics for RGMII[x]_TD[3:0], and RGMII[x]_TCTL – RGMII Mode
        3. 7.9.5.3  CPSW5G
          1. 7.9.5.3.1 CPSW5G MDIO Interface Timings
          2. 7.9.5.3.2 CPSW5G RMII Timings
            1. 7.9.5.3.2.1 Timing Requirements for RMII[x]_REFCLK – RMII Mode
            2. 7.9.5.3.2.2 Timing Requirements for RMII[x]_RXD[1:0], RMII[x]_CRS_DV, and RMII[x]_RXER – RMII Mode
            3. 7.9.5.3.2.3 Switching Characteristics for RMII[x]_TXD[1:0], and RMII[x]_TXEN – RMII Mode
          3. 7.9.5.3.3 CPSW5G RGMII Timings
            1. 7.9.5.3.3.1 Timing Requirements for RGMII[x]_RCLK – RGMII Mode
            2. 7.9.5.3.3.2 Timing Requirements for RGMII[x]_RD[3:0], and RGMII[x]_RCTL – RGMII Mode
            3. 7.9.5.3.3.3 Switching Characteristics for RGMII[x]_TCLK – RGMII Mode
            4. 7.9.5.3.3.4 Switching Characteristics for RGMII[x]_TD[3:0], and RGMII[x]_TCTL – RGMII Mode
        4. 7.9.5.4  DDRSS
        5. 7.9.5.5  ECAP
          1. 7.9.5.5.1 Timing Requirements for ECAP
          2. 7.9.5.5.2 Switching Characteristics for ECAP
        6. 7.9.5.6  EPWM
          1. 7.9.5.6.1 Timing Requirements for EPWM
          2. 7.9.5.6.2 Switching Characteristics for EPWM
        7. 7.9.5.7  EQEP
          1. 7.9.5.7.1 Timing Requirements for EQEP
          2. 7.9.5.7.2 Switching Characteristics for EQEP
        8. 7.9.5.8  GPIO
        9. 7.9.5.9  GPMC
          1. 7.9.5.9.1 GPMC and NOR Flash — Synchronous Mode
            1. 7.9.5.9.1.1 GPMC and NOR Flash Timing Requirements — Synchronous Mode
            2. 7.9.5.9.1.2 GPMC and NOR Flash Switching Characteristics – Synchronous Mode
          2. 7.9.5.9.2 GPMC and NOR Flash — Asynchronous Mode
            1. 7.9.5.9.2.1 GPMC and NOR Flash Timing Requirements – Asynchronous Mode
            2. 7.9.5.9.2.2 GPMC and NOR Flash Switching Characteristics – Asynchronous Mode
          3. 7.9.5.9.3 GPMC and NAND Flash — Asynchronous Mode
            1. 7.9.5.9.3.1 GPMC and NAND Flash Timing Requirements – Asynchronous Mode
            2. 7.9.5.9.3.2 GPMC and NAND Flash Switching Characteristics – Asynchronous Mode
        10. 7.9.5.10 HyperBus
          1. 7.9.5.10.1 Timing Requirements for HyperBus Initialization
          2. 7.9.5.10.2 HyperBus 166 MHz Switching Characteristics
          3. 7.9.5.10.3 HyperBus 100 MHz Switching Characteristics
        11. 7.9.5.11 I2C
        12. 7.9.5.12 I3C
        13. 7.9.5.13 MCAN
        14. 7.9.5.14 MCASP
          1. 7.9.5.14.1 Timing Requirements for MCASP
        15. 7.9.5.15 MCSPI
          1. 7.9.5.15.1 MCSPI — Controller Mode
          2. 7.9.5.15.2 MCSPI — Peripheral Mode
        16. 7.9.5.16 eMMC/SD/SDIO
          1. 7.9.5.16.1 MMCSD0 - eMMC Interface
            1. 7.9.5.16.1.1 Legacy SDR Mode
            2. 7.9.5.16.1.2 High Speed SDR Mode
            3. 7.9.5.16.1.3 High Speed DDR Mode
            4. 7.9.5.16.1.4 HS200 Mode
            5. 7.9.5.16.1.5 HS400 Mode
          2. 7.9.5.16.2 MMCSDi — MMCSD1 — SD/SDIO Interface
            1. 7.9.5.16.2.1 Default speed Mode
            2. 7.9.5.16.2.2 High Speed Mode
            3. 7.9.5.16.2.3 UHS–I SDR12 Mode
            4. 7.9.5.16.2.4 UHS–I SDR25 Mode
            5. 7.9.5.16.2.5 UHS–I SDR50 Mode
            6. 7.9.5.16.2.6 UHS–I DDR50 Mode
            7. 7.9.5.16.2.7 UHS–I SDR104 Mode
        17. 7.9.5.17 NAVSS
          1. 7.9.5.17.1 Timing Requirements for CPTS Input
          2. 7.9.5.17.2 Switching Characteristics for CPTS Output
        18. 7.9.5.18 OSPI
          1. 7.9.5.18.1 OSPI With Data Training
            1. 7.9.5.18.1.1 OSPI Switching Characteristics – Data Training
          2. 7.9.5.18.2 OSPI Without Data Training
            1. 7.9.5.18.2.1 OSPI Switching Characteristics – DDR Mode
            2. 7.9.5.18.2.2 OSPI Switching Characteristics – SDR Mode
            3. 7.9.5.18.2.3 OSPI Timing Requirements – DDR Mode
            4. 7.9.5.18.2.4 OSPI Timing Requirements – SDR Mode
        19. 7.9.5.19 PCIE
        20. 7.9.5.20 Timers
          1. 7.9.5.20.1 Timing Requirements for Timers
          2. 7.9.5.20.2 Switching Characteristics for Timers
        21. 7.9.5.21 UART
          1. 7.9.5.21.1 UART Timing Requirements
          2. 7.9.5.21.2 UART Switching Characteristics
        22. 7.9.5.22 USB
      6. 7.9.6 Emulation and Debug
        1. 7.9.6.1 Debug Trace
        2. 7.9.6.2 IEEE 1149.1 Standard–Test–Access Port (JTAG)
          1. 7.9.6.2.1 JTAG Electrical Data and Timing
            1. 7.9.6.2.1.1 Timing Requirements for IEEE 1149.1 JTAG
            2. 7.9.6.2.1.2 Switching Characteristics Over Recommended Operating Conditions for IEEE 1149.1 JTAG
  9. Detailed Description
    1. 8.1 Overview
    2. 8.2 Processor Subsystems
      1. 8.2.1 Arm Cortex-A72
      2. 8.2.2 Arm Cortex-R5F
    3. 8.3 Other Subsystems
      1. 8.3.1 MSMC
      2. 8.3.2 NAVSS
        1. 8.3.2.1 NAVSS0
        2. 8.3.2.2 MCU_NAVSS
      3. 8.3.3 PDMA Controller
      4. 8.3.4 Peripherals
        1. 8.3.4.1  ADC
        2. 8.3.4.2  ATL
        3. 8.3.4.3  CPSW2G
        4. 8.3.4.4  CPSW5G
        5. 8.3.4.5  DCC
        6. 8.3.4.6  DDRSS
        7. 8.3.4.7  ECAP
        8. 8.3.4.8  EPWM
        9. 8.3.4.9  ELM
        10. 8.3.4.10 ESM
        11. 8.3.4.11 EQEP
        12. 8.3.4.12 GPIO
        13. 8.3.4.13 GPMC
        14. 8.3.4.14 Hyperbus
        15. 8.3.4.15 I2C
        16. 8.3.4.16 I3C
        17. 8.3.4.17 MCAN
        18. 8.3.4.18 MCASP
        19. 8.3.4.19 MCRC Controller
        20. 8.3.4.20 MCSPI
        21. 8.3.4.21 MMC/SD
        22. 8.3.4.22 OSPI
        23. 8.3.4.23 PCIE
        24. 8.3.4.24 SerDes
        25. 8.3.4.25 WWDT
        26. 8.3.4.26 Timers
        27. 8.3.4.27 UART
        28. 8.3.4.28 USB
  10. Applications, Implementation, and Layout
    1. 9.1 Power Supply Mapping
    2. 9.2 Device Connection and Layout Fundamentals
      1. 9.2.1 Power Supply Decoupling and Bulk Capacitors
        1. 9.2.1.1 Power Distribution Network Implementation Guidance
      2. 9.2.2 External Oscillator
      3. 9.2.3 JTAG and EMU
      4. 9.2.4 Reset
      5. 9.2.5 Unused Pins
      6. 9.2.6 Hardware Design Guide for JacintoTM 7 Devices
    3. 9.3 Peripheral- and Interface-Specific Design Information
      1. 9.3.1 LPDDR4 Board Design and Layout Guidelines
      2. 9.3.2 OSPI and QSPI Board Design and Layout Guidelines
        1. 9.3.2.1 No Loopback and Internal Pad Loopback
        2. 9.3.2.2 External Board Loopback
        3. 9.3.2.3 DQS (only available in Octal Flash devices)
      3. 9.3.3 USB VBUS Design Guidelines
      4. 9.3.4 System Power Supply Monitor Design Guidelines
      5. 9.3.5 High Speed Differential Signal Routing Guidance
      6. 9.3.6 Thermal Solution Guidance
  11. 10Device and Documentation Support
    1. 10.1 Device Nomenclature
      1. 10.1.1 Standard Package Symbolization
      2. 10.1.2 Device Naming Convention
    2. 10.2 Tools and Software
    3. 10.3 Documentation Support
    4. 10.4 サポート・リソース
    5. 10.5 Trademarks
    6. 10.6 静電気放電に関する注意事項
    7. 10.7 用語集
  12. 11Mechanical, Packaging, and Orderable Information
    1. 11.1 Packaging Information

パッケージ・オプション

デバイスごとのパッケージ図は、PDF版データシートをご参照ください。

メカニカル・データ(パッケージ|ピン)
  • ALM|433
サーマルパッド・メカニカル・データ
発注情報
GPMC and NOR Flash Switching Characteristics – Synchronous Mode
NO.(2)PARAMETERDESCRIPTIONMODE(19)MINMAXMINMAXUNIT
100 MHz133 MHz
F01 / tc(clk)Period, output clock GPMC_CLK(18)div_by_1_mode;
GPMC_FCLK_MUX;
TIMEPARAGRANULARITY_X1
107.52ns
F1tw(clkH)Typical pulse duration, output clock GPMC_CLK highdiv_by_1_mode;
GPMC_FCLK_MUX;
TIMEPARAGRANULARITY_X1
-0.3+ 0.475*P(15)-0.3+ 0.475*P(15)ns
F1tw(clkL)Typical pulse duration, output clock GPMC_CLK lowdiv_by_1_mode;
GPMC_FCLK_MUX;
TIMEPARAGRANULARITY_X1
-0.3+ 0.475*P(15)-0.3+ 0.475*P(15)ns
F2td(clkH-csnV)Delay time, output clock GPMC_CLK rising edge to output chip select GPMC_CSn[i] transition(14)div_by_1_mode;
GPMC_FCLK_MUX;
TIMEPARAGRANULARITY_X1;
no extra_delay
-2.2+F(6)3.75+F(6)-2.2+F(6)3.75+F(6)ns
F3td(clkH-CSn[i]V)Delay time, output clock GPMC_CLK rising edge to output chip select GPMC_CSn[i] invalid(14)div_by_1_mode;
GPMC_FCLK_MUX;
TIMEPARAGRANULARITY_X1;
no extra_delay
-2.2+E(5)3.75+E(5)-2.2+E(5)3.75+E(5)ns
F4td(aV-clk)Delay time, output address GPMC_A[27:1] valid to output clock GPMC_CLK first edgediv_by_1_mode;
GPMC_FCLK_MUX;
TIMEPARAGRANULARITY_X1
-2.3+B(2)4.5+B(2)-2.3+B(2)4.5+B(2)ns
F5td(clkH-aIV)Delay time, output clock GPMC_CLK rising edge to output address GPMC_A[27:1] invaliddiv_by_1_mode;
GPMC_FCLK_MUX;
TIMEPARAGRANULARITY_X1
-2.34.5-2.34.5ns
F6td(be[x]nV-clk)Delay time, output lower byte enable and command latch enable GPMC_BE0n_CLE, output upper byte enable GPMC_BE1n valid to output clock GPMC_CLK first edgediv_by_1_mode;
GPMC_FCLK_MUX;
TIMEPARAGRANULARITY_X1
-2.3+B(2)1.9+B(2)-2.3+B(2)1.9+B(2)ns
F7td(clkH-be[x]nIV)Delay time, output clock GPMC_CLK rising edge to output lower byte enable and command latch enable GPMC_BE0n_CLE, output upper byte enable GPMC_BE1n invalid(11)div_by_1_mode;
GPMC_FCLK_MUX;
TIMEPARAGRANULARITY_X1
-2.3+D(4)1.9+D(4)-2.3+D(4)1.9+D(4)ns
F7td(clkL-be[x]nIV)Delay time, GPMC_CLK falling edge to GPMC_BE0n_CLE, GPMC_BE1n invalid(12)div_by_1_mode;
GPMC_FCLK_MUX;
TIMEPARAGRANULARITY_X1
-2.3+D(4)1.9+D(4)-2.3+D(4)1.9+D(4)ns
F7td(clkL-be[x]nIV).Delay time, GPMC_CLK falling edge to GPMC_BE0n_CLE, GPMC_BE1n invalid(13)div_by_1_mode;
GPMC_FCLK_MUX;
TIMEPARAGRANULARITY_X1
-2.3+D(4)1.9+D(4)-2.3+D(4)1.9+D(4)ns
F8td(clkH-advn)Delay time, output clock GPMC_CLK rising edge to output address valid and address latch enable GPMC_ADVn_ALE transitiondiv_by_1_mode;
GPMC_FCLK_MUX;
TIMEPARAGRANULARITY_X1;
no extra_delay
-2.3+G(7)4.5+G(7)-2.3+G(7)4.5+G(7)ns
F9td(clkH-advnIV)Delay time, output clock GPMC_CLK rising edge to output address valid and address latch enable GPMC_ADVn_ALE invaliddiv_by_1_mode;
GPMC_FCLK_MUX;
TIMEPARAGRANULARITY_X1;
no extra_delay
-2.3+D(4)4.5+D(4)-2.3+D(4)4.5+D(4)ns
F10td(clkH-oen)Delay time, output clock GPMC_CLK rising edge to output enable GPMC_OEn_REn transitiondiv_by_1_mode;
GPMC_FCLK_MUX;
TIMEPARAGRANULARITY_X1;
no extra_delay
-2.3H(8)3.5+H(8)-2.3H(8)3.5+H(8)ns
F11td(clkH-oenIV)Delay time, output clock GPMC_CLK rising edge to output enable GPMC_OEn_REn invaliddiv_by_1_mode;
GPMC_FCLK_MUX;
TIMEPARAGRANULARITY_X1;
no extra_delay
-2.3+E(8)3.5+E(8)-2.3+E(8)3.5+E(8)ns
F14td(clkH-wen)Delay time, output clock GPMC_CLK rising edge to output write enable GPMC_WEn transitiondiv_by_1_mode;
GPMC_FCLK_MUX;
TIMEPARAGRANULARITY_X1;
no extra_delay
-2.3+I(9)4.5+I(9)-2.3+I(9)4.5+I(9)ns
F15td(clkH-do)Delay time, output clock GPMC_CLK rising edge to output data GPMC_AD[15:0] transition(11)div_by_1_mode;
GPMC_FCLK_MUX;
TIMEPARAGRANULARITY_X1
-2.3+J(10)2.7+J(10)-2.3+J(10)2.7+J(10)ns
F15td(clkL-do)Delay time, GPMC_CLK falling edge to GPMC_AD[15:0] data bus transition(12)div_by_1_mode;
GPMC_FCLK_MUX;
TIMEPARAGRANULARITY_X1
-2.3+J(10)2.7+J(10)-2.3+J(10)2.7+J(10)ns
F15td(clkL-do).Delay time, GPMC_CLK falling edge to GPMC_AD[15:0] data bus transition(13)div_by_1_mode;
GPMC_FCLK_MUX;
TIMEPARAGRANULARITY_X1
-2.3+J(10)2.7+J(10)-2.3+J(10)2.7+J(10)ns
F17td(clkH-be[x]n)Delay time, output clock GPMC_CLK rising edge to output lower byte enable and command latch enable GPMC_BE0n_CLE transition(11)div_by_1_mode;
GPMC_FCLK_MUX;
TIMEPARAGRANULARITY_X1
-2.3+J(10)1.9+J(10)-2.3+J(10)1.9+J(10)ns
F17td(clkL-be[x]n)Delay time, GPMC_CLK falling edge to GPMC_BE0n_CLE, GPMC_BE1n transition(12)div_by_1_mode;
GPMC_FCLK_MUX;
TIMEPARAGRANULARITY_X1
-2.3+J(10)1.9+J(10)-2.3+J(10)1.9+J(10)ns
F17td(clkL-be[x]n).Delay time, GPMC_CLK falling edge to GPMC_BE0n_CLE, GPMC_BE1n transition(13)div_by_1_mode;
GPMC_FCLK_MUX;
TIMEPARAGRANULARITY_X1
-2.3+J(10)1.9+J(10)-2.3+J(10)1.9+J(10)ns
F18tw(csnV)Pulse duration, output chip select GPMC_CSn[i] low(14)ReadA(1)A(1)ns
WriteA(1)A(1)ns
F19tw(be[x]nV)Pulse duration, output lower byte enable and command latch enable GPMC_BE0n_CLE, output upper byte enable GPMC_BE1n lowReadC(3)C(3)ns
WriteC(3)C(3)ns
F20tw(advnV)Pulse duration, output address valid and address latch enable GPMC_ADVn_ALE lowReadK(16)K(16)ns
WriteK(16)K(16)ns
For single read: A = (CSRdOffTime - CSOnTime) × (TimeParaGranularity + 1) × GPMC_FCLK(17)
For burst read: A = (CSRdOffTime - CSOnTime + (n - 1) × PageBurstAccessTime) × (TimeParaGranularity + 1) × GPMC_FCLK(17)
For burst write: A = (CSWrOffTime - CSOnTime + (n - 1) × PageBurstAccessTime) × (TimeParaGranularity + 1) × GPMC_FCLK(17)
With n being the page burst access number.
B = ClkActivationTime × GPMC_FCLK(17)
For single read: C = RdCycleTime × (TimeParaGranularity + 1) × GPMC_FCLK(17)
For burst read: C = (RdCycleTime + (n - 1) × PageBurstAccessTime) × (TimeParaGranularity + 1) × GPMC_FCLK(17)
For burst write: C = (WrCycleTime + (n - 1) × PageBurstAccessTime) × (TimeParaGranularity + 1) × GPMC_FCLK(17)
With n being the page burst access number.
For single read: D = (RdCycleTime - AccessTime) × (TimeParaGranularity + 1) × GPMC_FCLK(17)
For burst read: D = (RdCycleTime - AccessTime) × (TimeParaGranularity + 1) × GPMC_FCLK(17)
For burst write: D = (WrCycleTime - AccessTime) × (TimeParaGranularity + 1) × GPMC_FCLK(17)
For single read: E = (CSRdOffTime - AccessTime) × (TimeParaGranularity + 1) × GPMC_FCLK(17)
For burst read: E = (CSRdOffTime - AccessTime) × (TimeParaGranularity + 1) × GPMC_FCLK(17)
For burst write: E = (CSWrOffTime - AccessTime) × (TimeParaGranularity + 1) × GPMC_FCLK(17)
For csn falling edge (CS activated):
  • Case GPMCFCLKDIVIDER = 0:
    • F = 0.5 × CSExtraDelay × GPMC_FCLK(17)
  • Case GPMCFCLKDIVIDER = 1:
    • F = 0.5 × CSExtraDelay × GPMC_FCLK(17) if (ClkActivationTime and CSOnTime are odd) or (ClkActivationTime and CSOnTime are even)
    • F = (1 + 0.5 × CSExtraDelay) × GPMC_FCLK(17) otherwise
  • Case GPMCFCLKDIVIDER = 2:
    • F = 0.5 × CSExtraDelay × GPMC_FCLK(17) if ((CSOnTime - ClkActivationTime) is a multiple of 3)
    • F = (1 + 0.5 × CSExtraDelay) × GPMC_FCLK(17) if ((CSOnTime - ClkActivationTime - 1) is a multiple of 3)
    • F = (2 + 0.5 × CSExtraDelay) × GPMC_FCLK(17) if ((CSOnTime - ClkActivationTime - 2) is a multiple of 3)
For ADV falling edge (ADV activated):
  • Case GPMCFCLKDIVIDER = 0:
    • G = 0.5 × ADVExtraDelay × GPMC_FCLK(17)
  • Case GPMCFCLKDIVIDER = 1:
    • G = 0.5 × ADVExtraDelay × GPMC_FCLK(17) if (ClkActivationTime and ADVOnTime are odd) or (ClkActivationTime and ADVOnTime are even)
    • G = (1 + 0.5 × ADVExtraDelay) × GPMC_FCLK(17) otherwise
  • Case GPMCFCLKDIVIDER = 2:
    • G = 0.5 × ADVExtraDelay × GPMC_FCLK(17) if ((ADVOnTime - ClkActivationTime) is a multiple of 3)
    • G = (1 + 0.5 × ADVExtraDelay) × GPMC_FCLK(17) if ((ADVOnTime - ClkActivationTime - 1) is a multiple of 3)
    • G = (2 + 0.5 × ADVExtraDelay) × GPMC_FCLK(17) if ((ADVOnTime - ClkActivationTime - 2) is a multiple of 3)

For ADV rising edge (ADV deactivated) in Reading mode:
  • Case GPMCFCLKDIVIDER = 0:
    • G = 0.5 × ADVExtraDelay × GPMC_FCLK(17)
  • Case GPMCFCLKDIVIDER = 1:
    • G = 0.5 × ADVExtraDelay × GPMC_FCLK(17) if (ClkActivationTime and ADVRdOffTime are odd) or (ClkActivationTime and ADVRdOffTime are even)
    • G = (1 + 0.5 × ADVExtraDelay) × GPMC_FCLK(17) otherwise
  • Case GPMCFCLKDIVIDER = 2:
    • G = 0.5 × ADVExtraDelay × GPMC_FCLK(17) if ((ADVRdOffTime - ClkActivationTime) is a multiple of 3)
    • G = (1 + 0.5 × ADVExtraDelay) × GPMC_FCLK(17) if ((ADVRdOffTime - ClkActivationTime - 1) is a multiple of 3)
    • G = (2 + 0.5 × ADVExtraDelay) × GPMC_FCLK(17) if ((ADVRdOffTime - ClkActivationTime - 2) is a multiple of 3)

For ADV rising edge (ADV deactivated) in Writing mode:
  • Case GPMCFCLKDIVIDER = 0:
    • G = 0.5 × ADVExtraDelay × GPMC_FCLK(17)
  • Case GPMCFCLKDIVIDER = 1:
    • G = 0.5 × ADVExtraDelay × GPMC_FCLK(17) if (ClkActivationTime and ADVWrOffTime are odd) or (ClkActivationTime and ADVWrOffTime are even)
    • G = (1 + 0.5 × ADVExtraDelay) × GPMC_FCLK(17) otherwise
  • Case GPMCFCLKDIVIDER = 2:
    • G = 0.5 × ADVExtraDelay × GPMC_FCLK(17) if ((ADVWrOffTime - ClkActivationTime) is a multiple of 3)
    • G = (1 + 0.5 × ADVExtraDelay) × GPMC_FCLK(17) if ((ADVWrOffTime - ClkActivationTime - 1) is a multiple of 3)
    • G = (2 + 0.5 × ADVExtraDelay) × GPMC_FCLK(17) if ((ADVWrOffTime - ClkActivationTime - 2) is a multiple of 3)
For OE falling edge (OE activated) and IO DIR rising edge (Data Bus input direction):
  • Case GPMCFCLKDIVIDER = 0:
    • H = 0.5 × OEExtraDelay × GPMC_FCLK(17)
  • Case GPMCFCLKDIVIDER = 1:
    • H = 0.5 × OEExtraDelay × GPMC_FCLK(17) if (ClkActivationTime and OEOnTime are odd) or (ClkActivationTime and OEOnTime are even)
    • H = (1 + 0.5 × OEExtraDelay) × GPMC_FCLK(17) otherwise
  • Case GPMCFCLKDIVIDER = 2:
    • H = 0.5 × OEExtraDelay × GPMC_FCLK(17) if ((OEOnTime - ClkActivationTime) is a multiple of 3)
    • H = (1 + 0.5 × OEExtraDelay) × GPMC_FCLK(17) if ((OEOnTime - ClkActivationTime - 1) is a multiple of 3)
    • H = (2 + 0.5 × OEExtraDelay) × GPMC_FCLK(17) if ((OEOnTime - ClkActivationTime - 2) is a multiple of 3)

For OE rising edge (OE deactivated):
  • Case GPMCFCLKDIVIDER = 0:
    • H = 0.5 × OEExtraDelay × GPMC_FCLK(17)
  • Case GPMCFCLKDIVIDER = 1:
    • H = 0.5 × OEExtraDelay × GPMC_FCLK(17) if (ClkActivationTime and OEOffTime are odd) or (ClkActivationTime and OEOffTime are even)
    • H = (1 + 0.5 × OEExtraDelay) × GPMC_FCLK(17) otherwise
  • Case GPMCFCLKDIVIDER = 2:
    • H = 0.5 × OEExtraDelay × GPMC_FCLK(17) if ((OEOffTime - ClkActivationTime) is a multiple of 3)
    • H = (1 + 0.5 × OEExtraDelay) × GPMC_FCLK(17) if ((OEOffTime - ClkActivationTime - 1) is a multiple of 3)
    • H = (2 + 0.5 × OEExtraDelay) × GPMC_FCLK(17) if ((OEOffTime - ClkActivationTime - 2) is a multiple of 3)
For WE falling edge (WE activated):
  • Case GPMCFCLKDIVIDER = 0:
    • I = 0.5 × WEExtraDelay × GPMC_FCLK(17)
  • Case GPMCFCLKDIVIDER = 1:
    • I = 0.5 × WEExtraDelay × GPMC_FCLK(17) if (ClkActivationTime and WEOnTime are odd) or (ClkActivationTime and WEOnTime are even)
    • I = (1 + 0.5 × WEExtraDelay) × GPMC_FCLK(17) otherwise
  • Case GPMCFCLKDIVIDER = 2:
    • I = 0.5 × WEExtraDelay × GPMC_FCLK(17) if ((WEOnTime - ClkActivationTime) is a multiple of 3)
    • I = (1 + 0.5 × WEExtraDelay) × GPMC_FCLK(17) if ((WEOnTime - ClkActivationTime - 1) is a multiple of 3)
    • I = (2 + 0.5 × WEExtraDelay) × GPMC_FCLK(17) if ((WEOnTime - ClkActivationTime - 2) is a multiple of 3)

For WE rising edge (WE deactivated):
  • Case GPMCFCLKDIVIDER = 0:
    • I = 0.5 × WEExtraDelay × GPMC_FCLK (17)
  • Case GPMCFCLKDIVIDER = 1:
    • I = 0.5 × WEExtraDelay × GPMC_FCLK(17) if (ClkActivationTime and WEOffTime are odd) or (ClkActivationTime and WEOffTime are even)
    • I = (1 + 0.5 × WEExtraDelay) × GPMC_FCLK(17) otherwise
  • Case GPMCFCLKDIVIDER = 2:
    • I = 0.5 × WEExtraDelay × GPMC_FCLK(17) if ((WEOffTime - ClkActivationTime) is a multiple of 3)
    • I = (1 + 0.5 × WEExtraDelay) × GPMC_FCLK(17) if ((WEOffTime - ClkActivationTime - 1) is a multiple of 3)
    • I = (2 + 0.5 × WEExtraDelay) × GPMC_FCLK(17) if ((WEOffTime - ClkActivationTime - 2) is a multiple of 3)
J = GPMC_FCLK(17)
First transfer only for CLK DIV 1 mode.
Half cycle; for all data after initial transfer for CLK DIV 1 mode.
Half cycle of GPMC_CLKOUT; for all data for modes other than CLK DIV 1 mode. GPMC_CLKOUT divide down from GPMC_FCLK.
In GPMC_CSn[i], i is equal to 0, 1, 2 or 3. In GPMC_WAIT[j], j is equal to 0 or 1.
P = GPMC_CLK period in ns
For read: K = (ADVRdOffTime - ADVOnTime) × (TimeParaGranularity + 1) × GPMC_FCLK(17)
For write: K = (ADVWrOffTime - ADVOnTime) × (TimeParaGranularity + 1) × GPMC_FCLK(17)
GPMC_FCLK is general-purpose memory controller internal functional clock period in ns.
Related to the GPMC_CLK output clock maximum and minimum frequencies programmable in the GPMC module by setting the GPMC_CONFIG1_i configuration register bit field GPMCFCLKDIVIDER.
For div_by_1_mode:
  • GPMC_CONFIG1_i register: GPMCFCLKDIVIDER = 0h:
    • GPMC_CLK frequency = GPMC_FCLK frequency

For GPMC_FCLK_MUX:
  • CTRLMMR_GPMC_CLKSEL[1-0] CLK_SEL = 01 = PER1_PLL_CLKOUT / 3 = 300 / 3 = 100MHz

For TIMEPARAGRANULARITY_X1:
  • GPMC_CONFIG1_i Register: TIMEPARAGRANULARITY = 0h = x1 latencies (affecting RD/WRCYCLETIME, RD/WRACCESSTIME, PAGEBURSTACCESSTIME, CSONTIME, CSRD/WROFFTIME, ADVONTIME, ADVRD/WROFFTIME, OEONTIME, OEOFFTIME, WEONTIME, WEOFFTIME, CYCLE2CYCLEDELAY, BUSTURNAROUND, TIMEOUTSTARTVALUE, WRDATAONADMUXBUS)

For no extra_delay:
  • GPMC_CONFIG2_i Register: CSEXTRADELAY = 0h = CSn Timing control signal is not delayed
  • GPMC_CONFIG4_i Register: WEEXTRADELAY = 0h = nWE timing control signal is not delayed
  • GPMC_CONFIG4_i Register: OEEXTRADELAY = 0h = nOE timing control signal is not delayed
  • GPMC_CONFIG3_i Register: ADVEXTRADELAY = 0h = nADV timing control signal is not delayed
GUID-15E6DF0F-CED7-41F6-9B7C-2CB448FFBD55-low.gif
In GPMC_CSn[i], i is equal to 0, 1, 2 or 3.
In GPMC_WAIT[j], j is equal to 0 or 1.
Figure 7-57 GPMC and NOR Flash — Synchronous Single Read (GPMCFCLKDIVIDER = 0)
GUID-BF774493-D226-4746-84E1-EC253E2F6E02-low.gif
In GPMC_CSn[i], i is equal to 0, 1, 2 or 3.
In GPMC_WAIT[j], j is equal to 0 or 1.
Figure 7-58 GPMC and NOR Flash — Synchronous Burst Read — 4x16–bit (GPMCFCLKDIVIDER = 0)
GUID-303303DA-BB3E-4C9A-90F8-0578C57AA6AD-low.gif
In GPMC_CSn[i], i is equal to 0, 1, 2 or 3.
In GPMC_WAIT[j], j is equal to 0 or 1.
Figure 7-59 GPMC and NOR Flash—Synchronous Burst Write (GPMCFCLKDIVIDER = 0)
GUID-7E193CA0-1BFB-4848-BF90-F82174643C4A-low.gif
In GPMC_CSn[i], i is equal to 0, 1, 2 or 3.
In GPMC_WAIT[j], j is equal to 0 or 1.
Figure 7-60 GPMC and Multiplexed NOR Flash — Synchronous Burst Read
GUID-D3F03E5A-08AB-4266-B4A5-94F63115813E-low.gif
In GPMC_CSn[i], i is equal to 0, 1, 2 or 3.
In GPMC_WAIT[j], j is equal to 0 or 1.
Figure 7-61 GPMC and Multiplexed NOR Flash — Synchronous Burst Write