JAJSOW1 データシート

JAJSOW1G November 2014 – July 2022 ISO7821

PRODUCTION DATA

パッケージ・オプション

デバイスごとのパッケージ図は、PDF版データシートをご参照ください。

メカニカル・データ（パッケージ｜ピン）

DWW|16
DW|16

サーマルパッド・メカニカル・データ

発注情報

6.9 Switching Characteristics, 5 V

V_CC1 = V_CC2 = 5 V ± 10% (over recommended operating conditions unless otherwise noted)

PARAMETER		TEST CONDITIONS	MIN	TYP	MAX	UNIT
t_PLH, t_PHL	Propagation delay time	See Figure 7-1	6	10.7	16	ns
PWD⁽¹⁾	Pulse width distortion \|t_PHL – t_PLH\|	See Figure 7-1		0.6	4.6	ns
t_sk(pp) ⁽²⁾	Part-to-part skew time				4.5	ns
t_r	Output signal rise time	See Figure 7-1		2.4	3.9	ns
t_f	Output signal fall time	See Figure 7-1		2.4	3.9	ns
t_PHZ	Disable propagation delay, high-to-high impedance output for ISO7821DWW and ISO7821FDWW	See Figure 7-2		12	20	ns
t_PLZ	Disable propagation delay, low-to-high impedance output for ISO7821DWW and ISO7821FDWW			12	20	ns
t_PZH	Enable propagation delay, high impedance-to-high output for ISO7821DWW			10	20	ns
t_PZH	Enable propagation delay, high impedance-to-high output for ISO7821FDWW			2	2.5	μs
t_PZL	Enable propagation delay, high impedance-to-low output for ISO7821DWW			2	2.5	μs
t_PZL	Enable propagation delay, high impedance-to-low output for ISO7821FDWW			10	20	ns
t_fs	Default output delay time from input power loss	Measured from the time V_CC goes below 1.7 V. See Figure 7-3		0.2	9	μs
t_ie	Time interval error	2¹⁶ - 1 PRBS data at 100 Mbps		1		ns

(1) Also known as Pulse Skew.

(2) t_sk(pp) is the magnitude of the difference in propagation delay times between any terminals of different devices switching in the same direction while operating at identical supply voltages, temperature, input signals and loads.