JAJSQ80C september 2013 – october 2020 SN65DSI86
PRODUCTION DATA
Table 8-2 summarizes the DSI data types supported by the SN65DSI86 . Any Data Type received by the DSIx6 that is not listed below will be ignored.
DATA TYPE | DESCRIPTION | DSI CHANNEL | PURPOSE |
---|---|---|---|
0x01 | Vsync Start | A and B | Events for Video Timing |
0x11 | Vsync End | A and B | |
0x21 | Hsync Start | A and B | |
0x31 | HSync End | A and B | |
0x08 | End of Transmission packet (EoTp) | A and B | Marks the end of a HS transmission. |
0x09 | Null Packet | A and B | |
0x19 | Blanking Packet | A and B | |
0x24 | Generic Read Request 2 parameters | A only | Read CFR Request |
0x37 | Set Maximum Return Packet Size | A only | Specifics the maximum amount data returned from a Generic Read Request supported by GPU. |
0x23 | Generic Short Write 2 parameters | A only | Configure CFR |
0x29 | Generic Long Write | A only | Configure CFR and Secondary Data Packets |
0x1E | Pixel Stream 18-bit RGB-666 Packed format | A and B | Active Pixel Data |
0x2E | Pixel Stream 18-bit RGB-666 Loosely Packed Format | A and B | |
0x3E | Pixel Stream 24-bit RGB-888 format | A and B |
DATA TYPE | DESCRIPTION | DSI CHANNEL | PURPOSE |
---|---|---|---|
0x24 | Generic Read Request 2 parameters | CHA Lane 0 | Read CFR requests |
0x23 | Generic Short Write 2 parameters | CHA Lane 0 | Configure CFR. |
0x08 | EoTp | CHA Lane 0 | Indicates end of HS transmission. |
DATA TYPE | DESCRIPTION | DSI CHANNEL | PURPOSE |
---|---|---|---|
0x11 | Generic Short Read Response 1 Byte | CHA Lane 0 | LPDT Response from Read Request |
0x02 | Acknowledge and Error Report | CHA Lane 0 | LPDT Response following a Generic Read/Write with errors. Or an unsolicited BTA. |
N/A | Acknowledge Trigger Message | CHA Lane 0 | Trigger Message used to indicate no errors detected in Generic Request. |