JAJSGK7 データシート

JAJSGK7C December 2018 – September 2020 SN74AXCH1T45

PRODUCTION DATA

パッケージ・オプション

メカニカル・データ（パッケージ｜ピン）

DRY|6
- MPDS221F
DCK|6
- MPDS114E
DTQ|6
- MUSS003A
DBV|6
- MPDS026Q

サーマルパッド・メカニカル・データ

DRY|6
- QFND138E

発注情報

6.1 Absolute Maximum Ratings

over operating free-air temperature range (unless otherwise noted)⁽¹⁾

			MIN	MAX	UNIT
V_CCA	Supply voltage A		–0.5	4.2	V
V_CCB	Supply voltage B		–0.5	4.2	V
V_I	Input Voltage⁽²⁾	I/O Ports (A Port)	–0.5	4.2	V
		I/O Ports (B Port)	–0.5	4.2
		Control Inputs	–0.5	4.2
V_O	Voltage applied to any output in the high-impedance or power-off state⁽²⁾	A Port	–0.5	4.2	V
V_O		B Port	–0.5	4.2	V
V_O	Voltage applied to any output in the high or low state⁽²⁾ ⁽³⁾	A Port	–0.5	V_CCA + 0.2	V
V_O		B Port	–0.5	V_CCB + 0.2	V
I_IK	Input clamp current	V_I < 0	–50		mA
I_OK	Output clamp current	V_O < 0	–50		mA
I_O	Continuous output current		–50	50	mA
	Continuous current through V_CC or GND		–100	100	mA
T_j	Junction Temperature			150	°C
T_stg	Storage temperature		–65	150	°C

(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

(2) The input voltage and output negative-voltage ratings may be exceeded if the input and output current ratings are observed.

(3) The output positive-voltage rating may be exceeded up to 4.2 V maximum if the output current rating is observed.