JAJSNO8 January 2022 TAA5242
ADVANCE INFORMATION
PARAMETER | TEST CONDITIONS | MIN | NOM | MAX | UNIT | ||
---|---|---|---|---|---|---|---|
ADC PERFORMANCE FOR INPUT RECORDING | |||||||
Differential input full-scale AC signal voltage | AC-coupled input | 2 | VRMS | ||||
Single-ended input full-scale AC signal voltage | AC-coupled input | 1 | VRMS | ||||
SNR | Signal-to-noise ratio, A-weighted(1)(2) | IN1 differential AC-coupled input selected and AC signal shorted to ground, 0-dB channel gain | 118 | dB | |||
SNR | Signal-to-noise ratio, A-weighted(1)(2) | IN1 differential DC-coupled input selected and AC signal shorted to ground, 0-dB channel gain, Device in Hign Common Mode Tolerance Mode | 110 | dB | |||
SNR | Signal-to-noise ratio, A-weighted(1)(2) | 1.8V AVDD Operation:IN1 differential AC-coupled input selected and AC signal shorted to ground, 0-dB channel gain | 110 | dB | |||
1.8V AVDD Operation:IN1 differential DC-coupled input selected and AC signal shorted to ground, 0-dB channel gain | 104 | ||||||
DR | Dynamic range, A-weighted(2) | IN1 differential AC-coupled input selected and –60-dB full-scale AC signal input, 0-dB channel gain | 118 | dB | |||
IN1 differential DC-coupled input selected and –60-dB full-scale AC signal input, 0-dB channel gain | 110 | ||||||
DR | Dynamic range, A-weighted(2) | 1.8V AVDD Operation: IN1 differential AC-coupled input selected and –60-dB full-scale AC signal input, 0-dB channel gain | 106 | 110 | dB | ||
1.8V AVDD Operation: IN1 differential DC-coupled input selected and –60-dB full-scale AC signal input, 0-dB channel gain | 104 | ||||||
THD+N | Total harmonic distortion(2) | IN1 differential AC-coupled input selected and –1-dB full-scale AC signal input, 0-dB channel gain | –95 | TBD | dB | ||
IN1 differential DC-coupled input selected and –1-dB full-scale AC signal input, 0-dB channel gain | –95 | ||||||
ADC OTHER PARAMETERS | |||||||
Input impedance | Differential input, between INxP and INxM, 5kΩ Mode | 5.5 | kΩ | ||||
Input impedance | Single-ended input, between INxP and INxM, 5kΩ Mode | 2.75 | kΩ | ||||
Offset | Shorted Input. | TBD | mV | ||||
Digital volume control range | Programmable 0.5-dB steps | –80 | 47 | dB | |||
Input Signal Bandwidth | Upto 192KSPS FS Rate | 0.46 | FS | ||||
>192KSPS | 90 | kHz | |||||
Output data sample rate | Programmable | 3.675 | 768 | kHz | |||
Output data sample word length | Programmable | 16 | 32 | Bits | |||
Digital high-pass filter cutoff frequency | First-order IIR filter | 2 | Hz | ||||
Interchannel isolation | –1-dB full-scale AC signal line-in input to non measurement channel | –134 | dB | ||||
Interchannel gain mismatch | –6-dB full-scale AC signal line-in input, 0-dB channel gain | 0.1 | dB | ||||
Interchannel phase mismatch | 1-kHz sinusoidal signal | 0.01 | Degrees | ||||
PSRR | Power-supply rejection ratio | 100-mVPP, 1-kHz sinusoidal signal on AVDD, differential input selected, 0-dB channel gain | 92 | dB | |||
MICROPHONE BIAS | |||||||
MICBIAS noise | BW = 20 Hz to 20 kHz, A-weighted, 1-µF capacitor between MICBIAS and AVSS | 2 | µVRMS | ||||
MICBIAS voltage | AVDD=1.8V | 1.375 | V | ||||
MICBIAS voltage | AVDD=3.3V | 2.75 | V | ||||
DIGITAL I/O | |||||||
VIL | Low-level digital input logic voltage threshold | All digital pins, IOVDD 1.8-V operation | –0.3 | 0.35 × IOVDD | V | ||
All digital pins, IOVDD 3.3-V operation | –0.3 | 0.8 | |||||
VIH | High-level digital input logic voltage threshold | All digital pins, IOVDD 1.8-V operation | 0.65 × IOVDD | IOVDD + 0.3 | V | ||
All digital pins, IOVDD 3.3-V operation | 2 | IOVDD + 0.3 | |||||
VOL | Low-level digital output voltage | All digital pins, IOL = –2 mA, IOVDD 1.8-V operation | 0.45 | V | |||
All digital pins, IOL = –2 mA, IOVDD 3.3-V operation | 0.4 | ||||||
VOH | High-level digital output voltage | All digital pins, IOH = 2 mA, IOVDD 1.8-V operation | IOVDD – 0.45 | V | |||
All digital pins, IOH = 2 mA, IOVDD 3.3-V operation | 2.4 | ||||||
IIL | Input logic-low leakage for digital inputs | All digital pins, input = 0 V | –5 | 0.1 | 5 | µA | |
IIH | Input logic-high leakage for digital inputs | All digital pins, input = IOVDD | –5 | 0.1 | 5 | µA | |
CIN | Input capacitance for digital inputs | All digital pins | 5 | pF | |||
TYPICAL SUPPLY CURRENT CONSUMPTION | |||||||
IAVDD | Current consumption in sleep mode (software shutdown mode) | All device external clocks stopped | TBD | µA | |||
IIOVDD | 1 | ||||||
IAVDD | Current consumption when MICBIAS ON, MICBIAS voltage 10 V, 30 mA load, ADC off | fS = 48 kHz, BCLK = 256 × fS | TBD | mA | |||
IIOVDD | 0.01 | ||||||
IAVDD | Current consumption with ADC 2-channel operation at fS 16-kHz, MICBIAS off, PLL on, BCLK = 512 × fS | TBD | mA | ||||
IIOVDD | 0.1 | ||||||
IAVDD | Current consumption with ADC 2-channel operation at fS 48-kHz, MICBIAS on, PLL off, BCLK = 512 × fS | TBD | mA | ||||
IIOVDD | 0.1 |