CAN Transceiver Physical Layer
Standards:
- ISO 11898-2:2016 High speed medium access unit (original
High Speed CAN transceiver standard)
- ISO 11898-5 High speed medium
access unit with low power mode (super sets -2 standard electrically in
several specs and adds the original wake up capability via the bus in low
power mode).
- ISO 11898-6 High speed medium
access unit with selective wake.
- ISO 8802-3: CSMA/CD –
referenced for collision detection from ISO11898-2
- CAN FD 1.0 Spec and
Papers
- Bosch “Configuration of CAN
Bit Timing”, Paper from 6th International CAN Conference (ICC), 1999. This
is repeated a lot in the DCAN IP CAN Controller spec copied into this system
spec.
- GMW3122: GM requirements for
HS CAN
- SAE J2284-2: High Speed CAN
(HSC) for Vehicle Applications at 250 kbps
- SAE J2284-3: High Speed CAN
(HSC) for Vehicle Applications at 500 kbps
EMC requirements:
- HW Requirements for CAN, LIN,
FR V1.3: German OEM requirements for HS CAN
Conformance Test requirements:
- HS_TRX_Test_Spec_V_1_0: GIFT / ICT CAN test requirements
for High Speed Physical Layer