7 Parameter Measurement Information

Figure 7-1 Test Circuit for Driver Switching

Figure 7-2 Waveforms for Driver Output Switching Measurements

Figure 7-3 Waveforms for Driver Enable or Disable Time Measurements

Figure 7-4 Receiver Switching Measurements

Figure 7-5 Overcurrent and Wake Conditions for EN = H and ILIM_ADJ = 10 kΩ to 110 kΩ,
TX = H (Full Lines); and TX = L (Red Dotted Lines)

Figure 7-6 Wake Conditions for EN = L, RX = H (Full Lines); and RX = L (Red Dotted Lines)

Figure 7-7 Overcurrent and Wake Conditions for EN = H and ILIM_ADJ is floating, TX = H (Full Lines); and TX = L (Red Dotted Lines)