SLVSH18 December   2024 TPS4HC120-Q1

PRODUCTION DATA  

  1.   1
  2. 1 Features
  3. 2 Applications
  4. 3 Description
  5. 4 Pin Configuration and Functions
    1.     6
  6. 5 Specifications
    1. 5.1 Absolute Maximum Ratings
    2. 5.2 ESD Ratings
    3. 5.3 Recommended Operating Conditions
    4. 5.4 Thermal Information
    5. 5.5 Electrical Characteristics
    6. 5.6 SNS Timing Characteristics
    7. 5.7 Switching Characteristics
    8. 5.8 Typical Characteristics
  7. 6 Detailed Description
    1. 6.1 Overview
    2. 6.2 Functional Block Diagram
    3. 6.3 Feature Description
      1. 6.3.1 Pin Current and Voltage Conventions
      2. 6.3.2 Low Power Mode
      3. 6.3.3 Accurate Current Sense
      4. 6.3.4 Adjustable Current Limit
      5. 6.3.5 Inductive-Load Switching-Off Clamp
      6. 6.3.6 Fault Detection and Reporting
        1. 6.3.6.1 Diagnostic Enable Function
        2. 6.3.6.2 Multiplexing of Current Sense
        3. 6.3.6.3 FAULT Reporting
        4. 6.3.6.4 Fault Table
      7. 6.3.7 Full Diagnostics
        1. 6.3.7.1 Short-to-GND and Overload Detection
        2. 6.3.7.2 Open-Load Detection
          1. 6.3.7.2.1 Channel On
          2. 6.3.7.2.2 Channel Off
        3. 6.3.7.3 Short-to-Battery Detection
        4. 6.3.7.4 Reverse-Polarity and Battery Protection
        5. 6.3.7.5 Thermal Fault Detection
          1. 6.3.7.5.1 Thermal Protection Behavior
      8. 6.3.8 Full Protections
        1. 6.3.8.1 UVLO Protection
        2. 6.3.8.2 Loss of GND Protection
        3. 6.3.8.3 Loss of Power Supply Protection
        4. 6.3.8.4 Reverse Polarity Protection
        5. 6.3.8.5 Protection for MCU I/Os
    4. 6.4 Device Functional Modes
      1. 6.4.1 Working Mode
  8. 7 Application and Implementation
    1. 7.1 Application Information
    2. 7.2 Typical Application
      1. 7.2.1 Design Requirements
      2. 7.2.2 Detailed Design Procedure
      3. 7.2.3 Application Curves
    3. 7.3 EMC Transient Disturbances Test
    4. 7.4 Power Supply Recommendations
    5. 7.5 Layout
      1. 7.5.1 Layout Guidelines
      2. 7.5.2 Layout Examples
        1. 7.5.2.1 Without a GND Network
        2. 7.5.2.2 With a GND Network
  9. 8 Device and Documentation Support
    1. 8.1 Receiving Notification of Documentation Updates
    2. 8.2 Support Resources
    3. 8.3 Trademarks
    4. 8.4 Electrostatic Discharge Caution
    5. 8.5 Glossary
  10. 9 Revision History
  11. 10Mechanical, Packaging, and Orderable Information

パッケージ・オプション

メカニカル・データ（パッケージ｜ピン）
サーマルパッド・メカニカル・データ
発注情報

5.6 SNS Timing Characteristics

VBB = 6V to 18V, TA = –40°C to 125°C (unless otherwise noted)
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
SNS TIMING - CURRENT SENSE
tSNSION1 Settling time from rising edge of DIAG_EN
50% of VDIAG_EN to 90% of settled ISNS		 VEN = 5V, VDIAG_EN = 0V to 5V
RSNS = 1kΩ, IL = 30mA		 60 µs
VENx= 5V, VDIAG_EN = 0V to 5V
RSNS = 1kΩ, IL = 1A		 30 µs
tSNSION2 Settling time from rising edge of EN and DIAG_EN
50% of VDIAG_EN  VEN to 90% of settled ISNS		 VEN = VDIAG_EN = 0V to 5V
VBB = 13.5V RSNS = 1kΩ, RLOAD = 20Ω		 150 µs
tSNSION3 Settling time from rising edge of EN with DIAG_EN HI;
50% of VDIAG_EN  VEN to 90% of settled ISNS		 VEN = 0V to 5V, VDIAG_EN = 5V, VBB = 13.5V, RSNS = 1kΩ, RLOAD = 20Ω 150 µs
tSNSIOFF Settling time from falling edge of DIAG_EN VEN = 5V, VDIAG_EN = 5V to 0V  VBB = 13.5V
RSNS = 1kΩ, RL = 20Ω		 20 µs
tSETTLEH Settling time from rising edge of load step VEN = 5V, VDIAG_EN = 5V
RSNS = 1kΩ, IOUT = 10mA to 1A 		 20 µs
tSETTLEL Settling time from falling edge of load step VEN = 5V, VDIAG_EN = 5V
RSNS = 1kΩ, IOUT = 1A to 10mA		 20 µs
tSELx Multi-sense transition delay from channel to channel VEN = 5V, VDIAG_EN = 5V
RSNS = 1kΩ, IOUT1 = 1A to IOUT2 = 0.5A		 50 µs