JAJSFM1B June   2018  – January 2021 TPS61372

PRODUCTION DATA  

  1. 1 特長
  2. 2 アプリケーション
  3. 3 概要
  4. 4 Revision History
  5. 5 Pin Configuration and Functions
  6. 6 Specifications
    1. 6.1 Absolute Maximum Ratings
    2. 6.2 ESD Ratings
    3. 6.3 Recommended Operating Conditions
    4. 6.4 Thermal Information
    5. 6.5 Electrical Characteristics
    6. 6.6 Typical Characteristics
  7. 7 Detailed Description
    1. 7.1 Overview
    2. 7.2 Functional Block Diagram
    3. 7.3 Feature Description
      1. 7.3.1 Undervoltage Lockout
      2. 7.3.2 Enable and Disable
      3. 7.3.3 Error Amplifier
      4. 7.3.4 Bootstrap Voltage (BST)
      5. 7.3.5 Load Disconnect
      6. 7.3.6 Overvoltage Protection
      7. 7.3.7 Thermal Shutdown
      8. 7.3.8 Start-Up
      9. 7.3.9 Short Protection
    4. 7.4 Device Functional Modes
      1. 7.4.1 Operation
      2. 7.4.2 Auto PFM Mode
      3. 7.4.3 Forced PWM Mode
      4. 7.4.4 Mode Selectable
  8. 8 Application and Implementation
    1. 8.1 Application Information
    2. 8.2 Typical Application
      1. 8.2.1 Design Requirements
      2. 8.2.2 Detailed Design Procedure
        1. 8.2.2.1 Custom Design With WEBENCH® Tools
        2. 8.2.2.2 Setting the Output Voltage
        3. 8.2.2.3 Selecting the Inductor
        4. 8.2.2.4 Selecting the Output Capacitors
        5. 8.2.2.5 Selecting the Input Capacitors
        6. 8.2.2.6 Loop Stability and Compensation
          1. 8.2.2.6.1 Small Signal Model
        7. 8.2.2.7 Loop Compensation Design Steps
        8. 8.2.2.8 Selecting the Bootstrap Capacitor
      3. 8.2.3 Application Curves
  9. 9 Power Supply Recommendations
  10. 10Layout
    1. 10.1 Layout Guidelines
    2. 10.2 Layout Example
      1. 10.2.1 Thermal Considerations
  11. 11Device and Documentation Support
    1. 11.1 Device Support
      1. 11.1.1 Third-Party Products Disclaimer
      2. 11.1.2 Development Support
        1. 11.1.2.1 Custom Design With WEBENCH® Tools
    2. 11.2 ドキュメントの更新通知を受け取る方法
    3. 11.3 サポート・リソース
    4. 11.4 Trademarks
    5. 11.5 静電気放電に関する注意事項
    6. 11.6 用語集
  12. 12Mechanical, Packaging, and Orderable Information

パッケージ・オプション

デバイスごとのパッケージ図は、PDF版データシートをご参照ください。

メカニカル・データ（パッケージ｜ピン）
  • YKB|16
サーマルパッド・メカニカル・データ
発注情報

8.2.2.2 Setting the Output Voltage

The output voltage of the TPS61372 is externally adjustable using a resistor divider network. The relationship between the output voltage and the resistor divider is given by Equation 1.

Equation 1. GUID-3D299AF3-820D-4AB0-B300-A562083E3250-low.gif

where

  • VOUT is the output voltage
  • RUP is the top divider resistor
  • RDOWN is the bottom divider resistor

Choose RDOWN to be approximately 100 kΩ. Slightly increasing or decreasing RDOWN can result in closer output voltage matching when using standard value resistors. In this design, RDOWN = 100 kΩ and RUP = 1.909 MΩ (1 MΩ + 909 kΩ) , resulting in an output voltage of 12 V.

For the best accuracy, TI recommends RDOWN to be around 100 kΩ to ensure that the current following through RDOWN is at least 100 times larger than FB pin leakage current. Changing RDOWN towards the lower value increases the robustness against noise injection. Changing RDOWN towards the higher values reduces the quiescent current for achieving higher efficiency at the light load currents.