SLVSCW2A September   2015  – February 2016 TPS657095

PRODUCTION DATA.  

  1. 1 Features
  2. 2 Applications
  3. 3 Description
  4. 4 Revision History
  5. 5 Pin Configuration and Functions
  6. 6 Specifications
    1. 6.1 Absolute Maximum Ratings
    2. 6.2 ESD Ratings
    3. 6.3 Recommended Operating Conditions
    4. 6.4 Thermal Information
    5. 6.5 Electrical Characteristics
    6. 6.6 Timing Requirements
    7. 6.7 Typical Characteristics
  7. 7 Detailed Description
    1. 7.1 Overview
    2. 7.2 Functional Block Diagram
    3. 7.3 Feature Description
      1. 7.3.1  State Diagram
      2. 7.3.2  Power-up Timing
      3. 7.3.3  GPO
      4. 7.3.4  GPIO
      5. 7.3.5  LED_EN
      6. 7.3.6  PWM Dimming
      7. 7.3.7  Crystal Oscillator and CLKOUT
      8. 7.3.8  LDOs
      9. 7.3.9  Undervoltage Lockout
      10. 7.3.10 Power Up/Power Down Default States
      11. 7.3.11 Output Voltage Discharge for LDO1 and LDO2
      12. 7.3.12 Power-Good Status Bits for LDO1 and LDO2
      13. 7.3.13 Short-Circuit Protection
      14. 7.3.14 Thermal Shutdown
      15. 7.3.15 LED Driver
      16. 7.3.16 4kByte OTP Memory
        1. 7.3.16.1 Programming the 4KByte OTP Memory
    4. 7.4 Device Functional Modes
      1. 7.4.1 Shutdown Mode
      2. 7.4.2 Operational Mode
    5. 7.5 Programming
      1. 7.5.1 Serial Interface
    6. 7.6 Register Map
      1. 7.6.1  DEV_AND_REV_ID Register Address: 00h
      2. 7.6.2  OTP_REV Register Address: 01h
      3. 7.6.3  GPIO_CTRL Register Address: 02h
      4. 7.6.4  PWM_OSC_CNTRL Register Address: 03h
      5. 7.6.5  ISINK_CURRENT Register Address: 04h
      6. 7.6.6  LDO_CTRL Register Address: 05h
      7. 7.6.7  LDO1_VCTRL Register Address: 06h
      8. 7.6.8  LDO2_VCTRL Register Address: 07h
      9. 7.6.9  PWM_DUTY_THR_L Register Address: 08h
      10. 7.6.10 PWM_DUTY_THR_H Register Address: 09h
      11. 7.6.11 RESERVED Register Address: 0Ah
      12. 7.6.12 PWM_DUTY_L Register Address: 0Bh
      13. 7.6.13 PWM_DUTY_H Register Address: 0Ch
      14. 7.6.14 RESERVED Register Address: 0Dh
      15. 7.6.15 SPARE Register Address: 0Eh
      16. 7.6.16 4K_OTP_PASSWORD Register Address: 0Fh
  8. 8 Application and Implementation
    1. 8.1 Application Information
    2. 8.2 Typical Application
      1. 8.2.1 Design Requirements
      2. 8.2.2 Detailed Design Procedure
        1. 8.2.2.1 Output Capacitor Selection
        2. 8.2.2.2 Input Capacitor Selection
      3. 8.2.3 Application Curves
  9. 9 Power Supply Recommendations
  10. 10Layout
    1. 10.1 Layout Guidelines
    2. 10.2 Layout Example
  11. 11Device and Documentation Support
    1. 11.1 Device Support
      1. 11.1.1 Third-Party Products Disclaimer
    2. 11.2 Community Resources
    3. 11.3 Trademarks
    4. 11.4 Electrostatic Discharge Caution
    5. 11.5 Glossary
  12. 12Mechanical, Packaging, and Orderable Information
    1. 12.1 Package Summary
    2. 12.2 Chip Scale Package Dimensions

パッケージ・オプション

メカニカル・データ（パッケージ｜ピン）
サーマルパッド・メカニカル・データ
発注情報

5 Pin Configuration and Functions

YFF Package
16-Pin DSBGA
Top View
TPS657095 Pinout.gif

Pin Functions

PIN I/O DESCRIPTION
NAME NUMBER
VCC C1, D3 I Supply Input. Connect a 1uF cap close to the C1 pin. Connect pins C1 and D3 together externally.
GND B1 I Ground connection (main device ground - connect to ground plane on PCB)
AVCC D4 I Analog Supply Input. Connect a 1uF cap close to pin. The D4 pin must be connected externally to the D3 and C1 pins.
AGND C4 I Analog Ground connection (device quiet ground - connect to ground plane on PCB)
VLDO1 D1 O Output voltage from LDO1
VLDO2 A1 O Output voltage from LDO2
ISINK A2 O Open drain current sink; connect to the cathode of LED
GPO D2 O general purpose output
LED_EN C2 I LED enable pin ( 0 = disabled, 1 = enabled)
GPIO B2 I General Purpose Input/Output (see GPIO_CTRL Register for details) As an input, it is used to enable LDO2
SCL B3 I clock input for the I2C compatible interface
SDA C3 I/O data input for the I2C compatible interface
XO B4 I connection for external crystal to clock generator (input of amplifier)
XI A4 I connection for external crystal to clock generator (output of amplifier)
CLKOUT A3 O clock output