VIN = VOUT(NOM) + 0.3V or 1.6V (whichever is greater), VOUT = 2.85V, IOUT = 1mA, CIN = 1µF, COUT (derated) = 0.75µF, and TA = 25°C (unless otherwise noted)
Figure 5-1 Line Regulation
Figure 5-3 Dropout Voltage vs IOUT
Figure 5-5 IGND vs IOUT
Figure 5-7 Shutdown Current vs VIN
Figure 5-9 Current Limit
Figure 5-11 Enable Logic High Threshold vs Temperature
Figure 5-13 Output Pulldown Resistor vs Temperature
IOUT = 50mA to 200mA, tRISING = 1µs |
Figure 5-15 Load Transient
IOUT = 50mA to 200mA, tRISING = 150ns |
Figure 5-17 Load Transient
IOUT = 1mA to 300mA, tRISING = 1µs |
Figure 5-19 Load Transient
IOUT = 1mA to 300mA, tRISING = 200ns |
Figure 5-21 Load Transient
IOUT = 0mA to 300mA, tRISING = 1µs |
Figure 5-23 Load Transient
IOUT = 0mA to 300mA, tRISING = 200ns |
Figure 5-25 Load Transient
VIN = 3.1V → 4.1V → 3.1V, VIN tRISING = 5µs, IOUT = 150mA |
Figure 5-27 Line Transient
VIN = 3.15V, VEN = 1V, CIN = 0.47µF |
Figure 5-29 PSRR vs Frequency and IOUT
Figure 5-31 Noise vs Frequency and IOUT
IOUT = 300mA, VRMS BW = 10Hz to 100kHz |
Figure 5-33 Noise vs Frequency and VIN
VIN = 3.85V, IOUT = 300mA, VRMS BW = 10Hz to 100kHz |
Figure 5-35 Noise vs Frequency and COUT
VIN = 0V to 3.85V, VEN = 0V to 3.85V, VEN rises 500µs behind VIN, VIN and VEN slew rate = 1V/µs |
Figure 5-37 Start-Up 
VIN = VEN = 0V to 3.85V, VIN and slew rate = 1V/µs |
|
Figure 5-39 Start-Up
Figure 5-2 Load Regulation
Figure 5-4 I GND vs VIN
Figure 5-6 Shutdown Current vs VIN
Figure 5-8 Enable Pin Leakage Current vs
VEN – VIN
Figure 5-10 UVLO Threshold vs Temperature
Figure 5-12 Enable Logic Low Threshold Low vs Temperature
Figure 5-14 Smart Enable Pulldown Resistor vs Temperature and VIN
IOUT = 200mA to 50mA, tFALLING = 1µs |
Figure 5-16 Load Transient
IOUT = 200mA to 50mA, tFALLING = 150ns |
Figure 5-18 Load Transient
IOUT = 300mA to 1mA, tFALLING = 1µs |
Figure 5-20 Load Transient
IOUT = 300mA to 1mA, tFALLING = 200ns |
Figure 5-22 Load Transient
IOUT = 300mA to 0mA, tFALLING = 1µs |
Figure 5-24 Load Transient
IOUT = 300mA to 0mA, tFALLING = 200ns |
Figure 5-26 Load Transient
VIN = 3.1V → 4.1V → 3.1V, VIN tRISING = 5µs, IOUT = 300mA |
Figure 5-28 Line Transient
VEN = 1V, IOUT = 20mA, CIN = 0.47µF |
Figure 5-30 PSRR vs Frequency and VIN
IOUT = 20mA, VRMS BW = 10Hz to 100kHz |
Figure 5-32 Noise vs Frequency and VIN
VIN = 3.85V, IOUT = 20mA, VRMS BW = 10Hz to 100kHz |
Figure 5-34 Noise vs Frequency and COUT
VEN = VEN(HI) to VOUT =
95% of VOUT(NOM), IOUT =
0mA |
Figure 5-36 Start-Up Turn-On Time
VIN = 0V to 3.85V, VEN = 0V to 3.85V, VEN rises 500µs ahead of VIN, VIN and VEN slew rate = 1V/µs |
Figure 5-38 Start-Up
VIN = 3.85V, VEN = 0V to 3.85V, VEN slew rate = 1V/µs, COUT = 10µF |
Figure 5-40 Inrush Current