JAJSGN3C December   2018  – December 2022 TPS7A25

PRODUCTION DATA  

  1. 1 特長
  2. 2 アプリケーション
  3. 3 概要
  4. 4 Revision History
  5. 5 Pin Configuration and Functions
  6. 6 Specifications
    1. 6.1 Absolute Maximum Ratings
    2. 6.2 ESD Ratings
    3. 6.3 Recommended Operating Conditions
    4. 6.4 Thermal Information
    5. 6.5 Electrical Characteristics
  7. 7 Typical Characteristics
  8. 8 Detailed Description
    1. 8.1 Overview
    2. 8.2 Functional Block Diagrams
    3. 8.3 Feature Description
      1. 8.3.1 Output Enable
      2. 8.3.2 Dropout Voltage
      3. 8.3.3 Current Limit
      4. 8.3.4 Undervoltage Lockout (UVLO)
      5. 8.3.5 Thermal Shutdown
      6. 8.3.6 Power Good
      7. 8.3.7 Active Overshoot Pulldown Circuitry
    4. 8.4 Device Functional Modes
      1. 8.4.1 Device Functional Mode Comparison
      2. 8.4.2 Normal Operation
      3. 8.4.3 Dropout Operation
      4. 8.4.4 Disabled
        1.       Application and Implementation
          1. 9.1 Application Information
            1. 9.1.1 Adjustable Device Feedback Resistors
            2. 9.1.2 Recommended Capacitor Types
            3. 9.1.3 Input and Output Capacitor Requirements
            4. 9.1.4 Reverse Current
            5. 9.1.5 Feed-Forward Capacitor (CFF)
            6. 9.1.6 Power Dissipation (PD)
            7. 9.1.7 Estimating Junction Temperature
            8. 9.1.8 Special Consideration for Line Transients
          2. 9.2 Typical Application
            1. 9.2.1 Design Requirements
            2. 9.2.2 Detailed Design Procedure
              1. 9.2.2.1 Transient Response
              2. 9.2.2.2 Selecting Feedback Divider Resistors
              3. 9.2.2.3 Thermal Dissipation
            3. 9.2.3 Application Curve
          3. 9.3 Power Supply Recommendations
          4. 9.4 Layout
            1. 9.4.1 Layout Guidelines
            2. 9.4.2 Layout Examples
  9. 9 Device and Documentation Support
    1. 9.1 Device Support
      1. 9.1.1 Device Nomenclature
    2. 9.2 Documentation Support
      1. 9.2.1 Related Documentation
    3. 9.3 Receiving Notification of Documentation Updates
    4. 9.4 サポート・リソース
    5. 9.5 Trademarks
    6. 9.6 Electrostatic Discharge Caution
    7. 9.7 Glossary
  10. 10Mechanical, Packaging, and Orderable Information
    1. 10.1 Mechanical Data

パッケージ・オプション

デバイスごとのパッケージ図は、PDF版データシートをご参照ください。

メカニカル・データ（パッケージ｜ピン）
  • DRV|6
サーマルパッド・メカニカル・データ
発注情報

9.2.2.2 Selecting Feedback Divider Resistors

For this design example, VOUT is set to 5 V. The following equations set the feedback divider resistors for the desired output voltage:

Equation 10. VOUT = VFB × (1 + R1 / R2)
Equation 11. R1 + R2 ≤ VOUT / (IFB × 100)

For improved output accuracy, use Equation 11 and IFB(TYP) = 10 nA as listed in the Electrical Characteristics table to calculate the upper limit for series feedback resistance, R1 + R2 ≤ 5 MΩ.

The control-loop error amplifier drives the FB pin to the same voltage as the internal reference (VFB = 1.24 V as listed in the Electrical Characteristics table). Use Equation 10 to determine the ratio of R1 / R2 = 3.03. Use this ratio and solve Equation 11 for R2. Now calculate the upper limit for R2 ≤ 1.24 MΩ. Select a standard resistor value for R2 = 1.18 MΩ.

Reference Equation 10 and solve for R1:

Equation 12. R1 = (VOUT / VFB – 1) × R2

From Equation 12, R1 = 3.64 MΩ can be determined. Select a standard resistor value for R1 = 3.6 MΩ. From Equation 10, VOUT = 5.023 V.