JAJSJF6C October   2021  – August 2023 TRF1208

PRODUCTION DATA  

  1.   1
  2. 1 特長
  3. 2 アプリケーション
  4. 3 概要
  5. 4 Revision History
  6. 5 Pin Configuration and Functions
  7. 6 Specifications
    1. 6.1 Absolute Maximum Ratings
    2. 6.2 ESD Ratings
    3. 6.3 Recommended Operating Conditions
    4. 6.4 Thermal Information
    5. 6.5 Electrical Characteristics: TRF1208
    6. 6.6 Electrical Characteristics: TRF1208B
    7. 6.7 Typical Characteristics: TRF1208
    8. 6.8 Typical Characteristics: TRF1208B
  8. 7 Detailed Description
    1. 7.1 Overview
    2. 7.2 Functional Block Diagram
    3. 7.3 Feature Description
      1. 7.3.1 Fully-Differential Amplifier
      2. 7.3.2 Single Supply Operation
    4. 7.4 Device Functional Modes
      1. 7.4.1 Power-Down Mode
  9. 8 Application and Implementation
    1. 8.1 Application Information
      1. 8.1.1 Driving a High-Speed ADC
      2. 8.1.2 Calculating Output Voltage Swing
      3. 8.1.3 Thermal Considerations
    2. 8.2 Typical Applications
      1. 8.2.1 TRF1208 in Receive Chain
        1. 8.2.1.1 Design Requirements
        2. 8.2.1.2 Detailed Design Procedure
      2. 8.2.2 TRF1208 in a Transmit Chain
        1. 8.2.2.1 Design Requirements
        2. 8.2.2.2 Detailed Design Procedure
    3. 8.3 Power Supply Recommendations
    4. 8.4 Layout
      1. 8.4.1 Layout Guidelines
      2. 8.4.2 Layout Example
  10. 9 Device and Documentation Support
    1. 9.1 Device Support
      1. 9.1.1 サード・パーティ製品に関する免責事項
    2. 9.2 Documentation Support
      1. 9.2.1 Related Documentation
    3. 9.3 ドキュメントの更新通知を受け取る方法
    4. 9.4 サポート・リソース
    5. 9.5 Trademarks
    6. 9.6 静電気放電に関する注意事項
    7. 9.7 用語集
  11. 10Mechanical, Packaging, and Orderable Information

パッケージ・オプション

メカニカル・データ（パッケージ｜ピン）
サーマルパッド・メカニカル・データ
発注情報

6.6 Electrical Characteristics: TRF1208B

at TA = 25°C, VDD = 3.3 V, 50-Ω single-ended input, and 100-Ω differential output (unless otherwise noted)
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
AC PERFORMANCE
SSBW Small-signal 3-dB bandwidth VO = 0.1 VPP 10.5 GHz
LSBW Large-signal 3-dB bandwidth VO = 1 VPP 10.5 GHz
1-dB BW Bandwidth for 1-dB flatness 8.8 GHz
S21 Power gain f = 2 GHz 10.5 dB
S11 Input return loss f = 10 MHz to 8 GHz –10 dB
S12 Reverse isolation f = 2 GHz –32 dB
Gain imbalance f = 10 MHz to 8 GHz ±0.3 dB
Phase imbalance f = 10 MHz to 8 GHz ±3 °
CMRR Common-mode rejection ratio(1) f = 2 GHz –45 dB
HD2 Second-order harmonic distortion f = 0.5 GHz, PO = +3 dBm –59 dBc
f = 2 GHz, PO = +3 dBm –56
f = 6 GHz, PO = +3 dBm –57
f = 8 GHz, PO = +3 dBm –58
HD3 Third-order harmonic distortion f = 0.5 GHz, PO = +3 dBm –63 dBc
f = 2 GHz, PO = +3 dBm –70
f = 6 GHz, PO = +3 dBm –62
f = 8 GHz, PO = +3 dBm –53
IMD2 Second-order intermodulation distortion f = 0.5 GHz, PO = –4 dBm per tone
(10-MHz spacing)		 –60 dBc
f = 2 GHz, PO = –4 dBm per tone
(10-MHz spacing)		 –56
f = 6 GHz, PO = –4 dBm per tone
(10-MHz spacing)		 –50
f = 8 GHz, PO = –4 dBm per tone
(10-MHz spacing)		 –46
IMD3 Third-order intermodulation distortion f = 0.5 GHz, PO = –4 dBm per tone
(10-MHz spacing)		 –74 dBc
f = 2 GHz, PO = –4 dBm per tone
(10-MHz spacing)		 –80
f = 6 GHz, PO = –4 dBm per tone
(10-MHz spacing)		 –63
f = 8 GHz, PO = –4 dBm per tone
(10-MHz spacing)		 –50
OP1dB Output 1-dB compression point f = 0.5 GHz 9.5 dBm
f = 2 GHz 14
f = 6 GHz 11
f = 8 GHz 8
OIP2 Output second-order intercept point f = 0.5 GHz, PO = –4 dBm per tone
(10-MHz spacing)		 55 dBm
f = 2 GHz, PO = –4 dBm per tone
(10-MHz spacing)		 51
f = 6 GHz, PO = –4 dBm per tone
(10-MHz spacing)		 45
f = 8 GHz, PO = –4 dBm per tone
(10-MHz spacing)		 42
OIP3 Output third-order intercept point f = 0.5 GHz, PO = –4 dBm per tone
(10-MHz spacing)		 33 dBm
f = 2 GHz, PO = –4 dBm per tone
(10-MHz spacing)		 36
f = 6 GHz, PO = –4 dBm per tone
(10-MHz spacing)		 28
f = 8 GHz, PO = –4 dBm per tone
(10-MHz spacing)		 21
NF Noise figure f = 0.5 GHz 9.0 dB
f = 2 GHz 9.4
f = 6 GHz 9.9
f = 8 GHz 10.2
IMPEDANCE
ZO-DIFF Differential output impedance f = DC (internal to the device) 3 Ω
ZIN Single ended input impedance INM pin terminated with 50 Ω 50 Ω
TRANSIENT
VOMAX Maximum output voltage (differential) 2 VPP
VOSAT Saturated output voltage level (differential) f = 2 GHz 2.8 VPP
tREC Overdrive recovery time Using a –0.5-VP input pulse of 2-ns duration 0.2 ns
POWER SUPPLY
IQA Active current Current on VDD pin, PD = 0 138 mA
IQPD Power-down quiescent current Current on VDD pin, PD = 1 7 mA
ENABLE
VPDHIGH PD pin logic high 1.45 V
VPDLOW PD pin logic low 0.8 V
IPDBIAS PD bias current (current on PD pin) PD = high (1.8-V logic) 50 100 µA
PD = high (3.3-V logic) 200 250
CPD PD pin capacitance 2 pF
tON Turn-on time 50% VPD to 90% RF 200 ns
tOFF Turn-off time 50% VPD to 10% RF 50 ns
(1) Calculated using the formula (S21-S31)/(S21+S31). Port-1: INP, Port-2: OUTP, Port-3: OUTM.