The TS3DV642-Q1 is an analog differential passive mux or demux that works for many high-speed differential interfaces with data rates up to 6 Gbps. The device also works for single ended signals. The TS3DV642-Q1 supports differential signaling with common mode voltage range (CMV) of 0 to 3.6 V and with differential amplitude up to 1800 mVpp, and single ended CMOS signaling with swing limited to 0 to 5.5 V. TS3DV642-Q1 can be used as mux or demux switch for:

• HDMI 1.4 and HDMI 2.0 - up to 6 Gbps per channel
• DisplayPort (DP) for RBR, HBR, and HBR-2 data rates - up to 5.4 Gbps per lane
• DP++
• Mipi DPHY interfaces such as DSI and CSI-2 - up to 4.5 Gbps per lane
• Mipi CPHY based CSI-2
• LVDS

6 Channels of the TS3DV642-Q1 are functionally equivalent and can be used in an arbitrary fashion for differential and single ended signals in any order. For example in Mipi DPHY applications any of the 6 differential channels can be used for clock signals. For Mipi CPHY applications the data pins can be grouped any order to form trio signals. For HDMI application, while TS3DV642-Q1 data signal pins are marked for specific HDMI use, the main-link data, main-link clock, DDC, HPD, CEC can be assigned in any order if required.