JAJSDL3D March   2016  – October 2024 SN65DPHY440SS , SN75DPHY440SS

PRODUCTION DATA  

  1.   1
  2. 1 特長
  3. 2 アプリケーション
  4. 3 概要
  5. 4 Pin Configuration and Functions
  6. 5 Specifications
    1. 5.1 Absolute Maximum Ratings
    2. 5.2 ESD Ratings
    3. 5.3 Recommended Operating Conditions
    4. 5.4 Thermal Information
    5. 5.5 Electrical Characteristics, Power Supply
    6. 5.6 Electrical Characteristics
    7. 5.7 Timing Requirements
    8. 5.8 Switching Characteristics
    9. 5.9 Typical Characteristics
  7. 6 Detailed Description
    1. 6.1 Overview
    2. 6.2 Functional Block Diagram
    3. 6.3 Feature Description
      1. 6.3.1 HS Receive Equalization
      2. 6.3.2 HS TX Edge Rate Control
      3. 6.3.3 TX Voltage Swing and Pre-Emphasis Control
      4. 6.3.4 Dynamic De-skew
    4. 6.4 Device Functional Modes
      1. 6.4.1 Shutdown Mode
      2. 6.4.2 LP Mode
      3. 6.4.3 ULPS Mode
      4. 6.4.4 HS Mode
    5. 6.5 Register Maps
      1. 6.5.1  BIT Access Tag Conventions
      2. 6.5.2  Standard CSR Registers (address = 0x000 - 0x07)
      3. 6.5.3  Standard CSR Register (address = 0x08)
      4. 6.5.4  Standard CSR Register (address = 0x09)
      5. 6.5.5  Standard CSR Register (address = 0x0A)
      6. 6.5.6  Standard CSR Register (address = 0x0B)
      7. 6.5.7  Standard CSR Register (address = 0x0D)
      8. 6.5.8  Standard CSR Register (address = 0x0E)
      9. 6.5.9  Standard CSR Register (address = 0x10) [reset = 0xFF]
      10. 6.5.10 Standard CSR Register (address = 0x11) [reset = 0xFF]
  8. 7 Application and Implementation
    1. 7.1 Application Information,
    2. 7.2 Typical Application, CSI-2 Implementations
      1. 7.2.1 Design Requirements
      2. 7.2.2 Detailed Design Procedure
        1. 7.2.2.1 Reset Implementation
      3. 7.2.3 Application Curves
    3. 7.3 Power Supply Recommendations
    4. 7.4 Layout
      1. 7.4.1 Layout Guidelines
      2. 7.4.2 Layout Example
  9. 8 Device and Documentation Support
    1. 8.1 ドキュメントの更新通知を受け取る方法
    2. 8.2 サポート・リソース
    3. 8.3 Trademarks
    4. 8.4 静電気放電に関する注意事項
    5. 8.5 用語集
  10. 9 Revision History
  11. 10Mechanical, Packaging, and Orderable Information

6.4.2 LP Mode

In this mode, the DPHY440 passes LP signals between DA[3:0]P/N and DB[3:0]P/N. The internal terminations for the HS receiver and HS transmitter are disabled when operating in this mode.

The MIPI DSI specification defines bidirectional communication between the host and peripheral. When a response is needed by the peripheral, the response is returned using LP signaling from DB0P/N to DA0P/N. The DPHY440 only supports this communication over lane 0 (DB0P/N to DA0P/N). The remaining lanes cannot be used for LP communications from peripheral to host (reverse direction).