SBOU271 January   2022 TMP1826

 

  1.   Trademarks
  2. 1Introduction
    1. 1.1 EVM Kit Contents
  3. 2EVM Hardware
    1. 2.1 Perforations
    2. 2.2 Subregulator
    3. 2.3 Logic Level Translator
    4. 2.4 Programming Header
    5. 2.5 BSL Button
    6. 2.6 Status LED
  4. 3Software Download
    1. 3.1 Live Software on dev.ti.com
    2. 3.2 Download from dev.ti.com
  5. 4Software
    1. 4.1 Home Tab
    2. 4.2 Data Capture Tab
    3. 4.3 Registers Tab
    4. 4.4 EEPROM Tab
  6. 5Schematic, Board Layout and Bill of Materials
    1. 5.1 Schematic
    2. 5.2 Printed Circuit Board (PCB)
    3. 5.3 Bill of Materials

2.6 Status LED

The red LED (D4) indicates status in the USB2ANY firmware. A blinking LED indicates the MSP430F5528 is waiting for USB connection from the GUI application. At initial power on, or when connected to the GUI, the LED turns off.