SLAU640B April   2019  – March 2023 ADC12DJ5200SE

 

  1.   Introduction
  2. 1Trademarks
  3. 2Equipment
    1. 2.1 Evaluation Board Feature Identification Summary
    2. 2.2 Required Equipment
  4. 3Setup Procedure
    1. 3.1  Install the High Speed Data Converter (HSDC) Pro Software
    2. 3.2  Install the Configuration GUI Software
    3. 3.3  Connect the EVM and TSW14J57EVM
    4. 3.4  Connect the Power Supplies to the Boards (Power Off)
    5. 3.5  Connect the Signal Generators to the EVM (RF Outputs Disabled Until Directed)
    6. 3.6  Turn On the TSW14J57EVM Power and Connect to the PC
    7. 3.7  Turn On the ADC12DJ5200RFEVM/SEEVM Power Supplies and Connect to the PC
    8. 3.8  Turn On the Signal Generator RF Outputs
    9. 3.9  Open the ADC12DJ5200RFEVM/SEEVM GUI and Program the ADC and Clocks
    10. 3.10 Calibrate the ADC Device on the EVM
    11. 3.11 Open the HSDC Software and Load the FPGA Image to the TSW14J57EVM
    12. 3.12 Capture Data Using the HSDC Pro Software
  5. 4Device Configuration
    1. 4.1 Supported JESD204C Device Features
    2. 4.2 Tab Organization
    3. 4.3 Low-Level Control
  6. 5Troubleshooting the ADC12DJ5200RFEVM/SEEVM
  7. 6References
    1. 6.1 Technical Reference Documents
    2. 6.2 TSW14J57EVM Operation
  8. 7HSDC Pro Settings for Optional ADC Device Configuration
    1. 7.1 Changing the Number of Frames per Multi-Frame (K)
    2. 7.2 Customizing the EVM for Optional Clocking Support
      1. 7.2.1 External Clocking Option (Default)
      2. 7.2.2 Onboard Clocking Option
      3. 7.2.3 External Reference Clocking Option
  9. 8Signal Routing
    1. 8.1 Signal Routing
  10.   A Analog Inputs
  11.   B Jumpers and LEDs
    1. 10.1 Jumper settings
  12.   B Revision History

8.1 Signal Routing

#GUID-911CB06F-AB3D-424F-87EE-295A74A909A5/SLAU70103171148 provides the signal routing details for the ADC12DJ5200RFEVM/SEEVM.

Table 8-1 ADCxxDJxx00RFEVM/SEEVM Signal Routing
JESD204C OutputLinkLIDFMC(+) PinsFMC(+) Signal Names(1)
DA0A0A10,A11DP3_M2C
DA1A1C6,C7DP0_M2C
DA2A2A6,A7DP2_M2C
DA3A3A2,A3DP1_M2C
DB0B0B12,B13DP7_M2C_INV
DB1B1A14,A15DP4_M2C_INV
DB2B2B16,B17DP6_M2C_INV
DB3B3A18,A19DP5_M2C_INV
DA4A4Z12,Z13DP11_M2C
DA5A5Y10,Y11DP10_M2C
DA6A6B8,B9DP8_M2C
DA7A7B4,B5DP9_M2C
DB4B4Y14,Y15DP12_M2C_INV
DB5B5Z16,Z17DP13_M2C_INV
DB6B6Y18,Y19DP14_M2C_INV
DB7B7Y22,Y23DP15_M2C_INV
(1) Red items with _INV in the signal name are inverted with respect to standard FMC polarity.