SLAU943 July   2024 AMC6V704

 

  1.   1
  2.   Description
  3.   Get Started
  4.   Features
  5.   Applications
  6.   6
  7. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
    3. 1.3 Specification
    4. 1.4 Device Information
  8. 2Hardware
    1. 2.1 Hardware Setup
      1. 2.1.1 Electrostatic Discharge Caution
      2. 2.1.2 Power Configurations and Jumper Settings
      3. 2.1.3 Connecting the FTDI Digital Controller
    2. 2.2 Hardware Description
      1. 2.2.1 Connector Definitions
  9. 3Software
    1. 3.1 Software Setup
      1. 3.1.1 Software Installation
    2. 3.2 Software Description
      1. 3.2.1 Launching the Software
      2. 3.2.2 Software Features
        1. 3.2.2.1 High Level Configuration Page
        2. 3.2.2.2 Low Level Configuration Page
  10. 4Hardware Design Files
    1. 4.1 EVM Schematics
    2. 4.2 PCB Layout
    3. 4.3 Bill of Materials
  11. 5Additional Information
    1. 5.1 Trademarks
  12. 6Related Documentation From Texas Instruments

4.2 PCB Layout

Figure 5-4 through Figure 5-9 show the board layout for the AMC6V704EVM.

AMC6V704EVM AMC6V704EVM PCB Top Layer LayoutFigure 4-4 AMC6V704EVM PCB Top Layer Layout
AMC6V704EVM AMC6V704EVM PCB Mid Layer 1 Layout (Ground Plane)Figure 4-5 AMC6V704EVM PCB Mid Layer 1 Layout (Ground Plane)
AMC6V704EVM AMC6V704EVM PCB Mid Layer 2 Layout (Power Layer)Figure 4-6 AMC6V704EVM PCB Mid Layer 2 Layout (Power Layer)
AMC6V704EVM AMC6V704EVM PCB Mid Layer 3 Layout (Signal Layer)Figure 4-7 AMC6V704EVM PCB Mid Layer 3 Layout (Signal Layer)
AMC6V704EVM AMC6V704EVM PCB Mid Layer 4 Layout (Ground Plane)Figure 4-8 AMC6V704EVM PCB Mid Layer 4 Layout (Ground Plane)
AMC6V704EVM AMC6V704EVM PCB Bottom Layer Layout Figure 4-9 AMC6V704EVM PCB Bottom Layer Layout