SLOA332A July   2023  – September 2024 LMV821-N , LMV831 , OPA2991 , OPA345 , OPA376 , OPA376-Q1 , OPA377 , OPA377-Q1 , OPA4991 , OPA991 , TL074 , TLV376 , TLV9001 , TLV9002 , TS321

 

  1.   1
  2.   Abstract
  3.   Trademarks
  4. Slew Rate Definition
    1. 1.1 Virtual Ground and Slew Rate
  5. Bipolar Op Amp Slew Rate Example
  6. CMOS Op Amp Slew Rate Example
    1. 3.1 Slew Boost Example 1
    2. 3.2 Slew Boost Example 2
    3. 3.3 Slew Boost Summary
  7. Four Methods to Determine Boost or No Boost Using the Data Sheet
    1. 4.1 Method 1: Compare Slew Rate Versus Gain Bandwidth
    2. 4.2 Method 2: Compare Quiescent Current Versus Similar SR Devices
    3. 4.3 Method 3: Evaluate Large Signal Response
    4. 4.4 Method 4: Evaluate Small Signal Response
  8. Slew Rate Dependencies on Circuit Signal Levels and Op Amp Gain Set by Feedback Network
  9. How Much Output Slew Rate is Needed to Support a Sine Wave or Other Non-step Inputs
  10. Stability Also Plays a Role in Observed Slew Rate
  11. Summary
  12. References
  13. 10Revision History

Four Methods to Determine Boost or No Boost Using the Data Sheet

There are four methods to infer boost or no boost from a data sheet. LMV831 and TLV9001 will be used as examples.

  1. Comparing the slew rate versus the gain bandwidth
  2. Comparing the quiescent current versus similar SR devices
  3. Evaluate the large signal response
  4. Evaluate the small signal response