SLUU333A July   2008  – January 2022 TPS53124

 

  1.   Trademarks
  2. 1Description
  3. 2Electrical Performance
  4. 3Schematic
  5. 4Test Setup and Results
    1. 4.1 Test Setup
    2. 4.2 Test Procedure
    3. 4.3 Start-Up Performance
    4. 4.4 Transient Response
  6. 5Configuration
    1. 5.1 Bootstrap Diode Selection
  7. 6EVM Assembly Drawing and PCB Layout
  8. 7List of Materials
  9. 8Reference
  10. 9Revision History

4.2 Test Procedure

  1. Make sure the switches SW1 (EN1) and SW2 (EN2) are in OFF position.
  2. Apply appropriate VIN voltage to VIN and VIN_GND terminals.
  3. Turn on SW1 (EN1), CH1-output will start up.
  4. Turn on SW2 (EN2), CH2-output will start up.