SLVK148B August   2023  – September 2023 TPS7H2211-SEP

PRODUCTION DATA  

  1.   1
  2.   Trademarks
  3. 1Device Information
    1. 1.1 Product Description
    2. 1.2 Device Details
  4. 2Total Dose Test Setup
    1. 2.1 Test Overview
    2. 2.2 Test Description and Facilities
    3. 2.3 Test Setup Details
      1. 2.3.1 Unbiased
      2. 2.3.2 Biased
    4. 2.4 Test Configuration and Condition
  5. 3TID Characterization Test Results
    1. 3.1 TID Characterization Summary Results
    2. 3.2 TPS7H2211-SEP Specification Compliance Matrix
  6. 4Applicable and Reference Documents
    1. 4.1 Applicable Documents
    2. 4.2 Reference Documents
  7. 5Revision History
  8.   A Appendix: HDR TID Report Data

3.2 TPS7H2211-SEP Specification Compliance Matrix

ParameterTest ConditionsMINTYPMAXUnitSPECIDTest Number
POWER SUPPLIES AND CURRENTS
VINUVLOR3.23.43.8VVIN_UVLO_RISE5
VINUVLOF2.62.93.2VVIN_UVLO_FALL5.1
HYSTVIN-UVLO0.550.75VVIN_UVLO_HYST5.2
IQIOUT = 0 mA, EN = 7 V, IOUT = 0 mA, EN = 7 V510mAIQ_VIN3
IFEN = 0 V, VOUT = 0 V, measured VOUT current, VIN = 14 V11.3mAFORWARD_LEAKAGE4.9
IFEN = 0 V, VOUT = 0 V, measured VOUT current, VIN = 12 V0.650.94mAFORWARD_LEAKAGE_12V4.7
IFEN = 0 V, VOUT = 0 V, measured VOUT current, VIN = 9 V0.150.49mAFORWARD_LEAKAGE_9V4.5
IFEN = 0 V, VOUT = 0 V, measured VOUT current, VIN = 4.5 V0.040.23mAFORWARD_LEAKAGE_4p5V4.1
ISD VINEN = 0 V, VOUT = 0 V, measured VIN current, VIN = 14 V6.910mAISD_VIN_14V4.8
ISD VINEN = 0 V, VOUT = 0 V, measured VIN current, VIN = 12 V5.99.5mAISD_VIN_12V4.6
ISD VINEN = 0 V, VOUT = 0 V, measured VIN current, VIN = 9 V4.48mAISD_VIN_9V4.4
ISD VINEN = 0 V, VOUT = 0 V, measured VIN current, VIN = 4.5 V3.77mAISD_VIN_4p5V4
VRCP_ENTEREN = 7 V, VIN = 4.5 V390mVNS92N7_1
VRCP_ENTEREN = 7 V, VIN = 14 V363mVNSPQQO_1
VRCP_EXITEN = 7 V, VIN = 4.5 V264mVNSMFME_1
VRCP_EXITEN = 7 V, VIN = 14 V249mVNSY0QQ_1
tRCPEN = 7 V, VIN = 4.5 V208µsNS8C9O_1
tRCPEN = 7 V, VIN = 14 V247µsNSOWO7_1
IRCPEN = 0 V, VOUT = 0 to 14 V and VOUT > VIN, EN = 0 V, VOUT = 0 to 14 V and VOUT > VIN44250µAIRCP_EN_0V3.1, 3.3
IRCPEN = 7 V, VIN = 0 V, VOUT = 0 to 14 V, EN = 7 V, VIN = 0 V, VOUT = 0 to 14 V37240µAIRCP_EN_7V3.4, 3.5
SOFT START
ISS6583µASS_I_Charge6.3, 6.7
ENABLE (EN) INPUT
VIHEN0.590.630.67VEN_VTH_RISING_PLASTIC6, 6.4
VILEN0.490.520.55VEN_VTH_FALLING_PLASTIC6.1, 6.5
HYSTEN951061mVEN_HYST_PLASTIC6.2, 6.6
tLOWRTIMER = 0 V, RTIMER = 0 V20µsEN_LOW_TIME_SHORT_RETRY
tLOW_OFFVOUT falls to < 90%

47

µsEN_LOW_TIME_CYCLING_PLASTIC
VINEN75%VIN_EN_PERCENTAGE
IENEN = 7 V, VIN = 14 V, EN = 7 V, VIN = 14 V212nAIEN_VIN6.8, 6.9
OVERVOLTAGE PROTECTION (OVP)
VOVPR1.071.151.22VOVP_VTH_Rising_PLASTIC7, 7.3
VOVPF1.041.121.19VOVP_VTH_Falling_PLASTIC7.1, 7.4
HYSTOVP4.6 V < VIN < 14 V, 4.6 V < VIN < 14 V

24

28

33

mVOVP_HYST_PLASTIC7.2, 7.5
IOVPOVP = 7 V, OVP = 7 V1.512nAOVP_ILEAK7.6, 7.7
CURRENT LIMIT

IL_trip

VIN = 12 V, CSS = 2 nF, VIN = 12 V, CSS = 2 nF

8ANSFVE3_1
IL_peakVIN = 12 V, 10 Ω to 10 mΩ short in 1 µs, switch inductance = 270 nH, VIN = 12 V, 10 Ω to 10 mΩ short in 1 µs, switch inductance = 270 nH25AFTO_Current_Limit
tftrVIN = 12 V, 10 Ω to 10 mΩ short in 1 µs, switch inductance = 270 nH, VIN = 12 V, 10 Ω to 10 mΩ short in 1 µs, switch inductance = 270 nH2.3µsCurrent_Limit_Timer
tftoVIN = 12 V, CSS = 2 nF, VIN = 12 V, CSS = 2 nF51µsFTO_OFF_TIME
THERMAL SHUTDOWN
Thermal shutdown155°CThermal_SHDN
Thermal shutdown hysteresis20°CThermal_SHDN_Hyst
RESISTANCE CHARACTERISTICS
RONVIN = 14 V, Iout = 3.5 A44.346mΩRON_VIN_14V_25_Plastic8.4
RONVIN = 12 V, Iout = 3.5 A4446mΩRON_VIN_12V_25_Plastic8.3
RONVIN = 9 V, Iout = 3.5 A43.645mΩRON_VIN_9V_25_Plastic8.2
RONVIN = 6 V, Iout = 3.5 A43.545mΩRON_VIN_6V_25_Plastic8.1
RONVIN = 4.5 V, Iout = 3.5 A47.649mΩRON_VIN_4P5V_25_Plastic8.0