9 USB to MDIO Procedure

Follow this procedure when using the USB to MDIO GUI for the 510 EVM application:

1. Follow the general USB to MDIO userguide:
2. Change the extended register to No.
   Figure 9-1 Example of Changing Extended Register to NO
3. Use 000D and 000E for extended register.

2.4 Vpp with Extended Register Example:

//Set Output operating mode for 2.4 Vpp 
begin
000D 0001
000E 08F6
000D 4001
000E 1000 //enable 2.4 Vpp operating mode

000D 0007
000E 020E
000D 4007
000E B000 //Request increased the transmit level in MMD07

000D 001F
000E 0010
000D 401F
000E 4000 //soft reset
end

1V Vpp with Extended Register Example:

//Set Output operating mode for 1V Vpp 
begin
000D 0001
000E 08F6
000D 4001
000E 0000 //enable 1 Vpp operating mode

000D 0007
000E 020E
000D 4007
000E 8000 //Do not request increased transmit level in MMD07

000D 001F
000E 0010
000D 401F
000E 4000 //soft reset
end