SNOU197 july   2023 TLV3607

 

  1.   1
  2.   Description
  3.   Features
  4.   4
  5. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
    3. 1.3 Specification
    4. 1.4 Device Information
  6. 2Hardware
    1. 2.1 Recommended Equipment Setup
    2. 2.2 Board Setup
      1. 2.2.1 Power Supplies
      2. 2.2.2 Inputs
      3. 2.2.3 Outputs
      4. 2.2.4 Hysteresis
    3. 2.3 Quick-Start Procedure
  7. 3Hardware Design Files
    1. 3.1 Schematic
    2. 3.2 PCB Layouts
    3. 3.3 Bill of Materials
  8. 4Additional Information
    1.     Trademarks

1.3 Specification

  • Supply Range: +2.4 V to +5.5 V
  • Input Common Mode Voltage Range: (VEE - 0.2 V) to (VCCI + 0.2 V)
Table 1-1 TLV3607EVM SMA and Test Point to DUT Pin Mapping
TLV3607EVM CONNECTIONS

SMA J7: IN+A

SMA J5: IN+A SENSE

IN+A (Pin 1)
SMA J10: IN-AIN-A (Pin 2)
SMA J11: IN-BIN-B (Pin 3)

SMA J18: IN+B

SMA J12: IN+B SENSE

IN+B (Pin 4)
Test Point 5: VCCIVCCI (Pin 5)
Test Point 2 and 4: VEEVEE (Pin 6, 14)
SMA J15: LE/HYSBLE/HYSB (Pin 7)
SMA J16: SHDNBSHDNB (Pin 8)
SMA J9: OUT+BOUT+B (Pin 9)
SMA J14: OUT-BOUT-B (Pin 10)
SMA J8: OUT-AOUT-A (Pin 11)
SMA J6: OUT+AOUT+A (Pin 12)
Test point 3: VCCOVCCO (Pin 13)
SMA J4: LE/HYSALE/HYSA (Pin 15)
SMA J2: SHDNASHDNA (Pin 16)
Test Points 1 and 6: GNDSystem Ground
Note: There are only sense lines for the non-inverting inputs (IN+A SENSE and IN+B SENSE).