SNVU894 December   2024 LM5169

 

  1.   1
  2.   Description
  3.   Get Started
  4.   Features
  5.   Applications
  6.   6
  7. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
    3. 1.3 Specification
    4. 1.4 Device Information
    5. 1.5 General TI High Voltage Evaluation User Safety Guidelines
  8. 2Hardware
    1. 2.1 Quick Start Procedure
    2. 2.2 Detailed Descriptions
      1. 2.2.1 Compatibility With the LM5017
  9. 3Implementation Results
    1. 3.1 Performance Curves
    2. 3.2 EVM Characteristics
  10. 4Hardware Design Files
    1. 4.1 Schematic
    2. 4.2 PCB Layout
    3. 4.3 Bill of Materials
  11. 5Additional Information
    1. 5.1 Trademarks

2.1 Quick Start Procedure

  1. Connect the input voltage supply to the VIN connector (+ and –).
  2. Connect the load or loads to the VOUT and the VOUT2 connectors (+ and –).
  3. Set the input supply voltage to an appropriate level between 20V to 115V.
  4. Turn on the power supply. The EVM powers up and provides VOUT = 10V, and VOUT2 = 10V.

See Figure 2-3 for the location of the connectors.

LM5169FEVM LM5169FEVM (Top View) Figure 2-1 LM5169FEVM (Top View)
LM5169FEVM LM5169FEVM (Bottom View) Figure 2-2 LM5169FEVM (Bottom View)