그림 1에는 BAW 공진기 기술의 구조가 나와 있습니다. 구조에는 금속 필름과 기계 에너지를 제한하는 다른 층 사이에 끼워진 얇은 압전 필름 층이 포함되어 있습니다. BAW는 이 압전 변환을 사용하여 진동을 생성합니다.
건물 자동화 시스템은 확장 가능한 수준에서 안전성, 견고성 및 안정성을 극대화합니다. IP 카메라, 비디오 감시 및 HVAC와 같은 애플리케이션에서 더 나은 성능을 얻으려면 정확한 클록 데이터로 구성된 복잡하고 안정적인 네트워크가 필요합니다.
위에 나열된 것과 같은 고급 건물 자동화 시스템에는 다음과 같은 성능 메트릭이 필요합니다.
건물 자동화 시스템에서 CDC6C 및 LMK6C BAW 오실레이터를 다음 장치의 레퍼런스 클록으로 사용할 수 있습니다.
장치 | 주파수 |
---|---|
오디오 | 12.288MHz/24.576MHz |
100M 이더넷 | 25MHz |
MCU | 16MHz/25MHz |
이미지 센서 | 37.125MHz/54MHz |
SoC 시스템 클록 | 48MHz/50MHz |
WIFI/BLE | 38.4MHz/48MHz |
HDMI/SDI | 297MHz |
Gb 이더넷 | 125MHz |
위에 나열된 모든 주파수에서 지터 성능, 안정성 및 안정성은 핵심 성능 요소입니다. 이러한 모든 메트릭은 BAW 오실레이터 솔루션을 통해 충족할 수 있습니다.
그림 6에는 IP 카메라 및 HVAC 시스템의 일반적인 블록 다이어그램이 나와 있습니다. IP 카메라 애플리케이션의 경우 BAW 오실레이터를 ASIC, MCU, 이미지 센서, 오디오 코덱, HDMI/SDI 및 이더넷 PHY의 레퍼런스 클록으로 사용할 수 있습니다. HVAC 시스템의 경우 BAW 오실레이터를 WIFI/BLE, MCU, FPGA 및 이더넷 PHY에 대한 레퍼런스로 사용할 수 있습니다.
장치 | 유형 | 기능 | 주요 기능 |
---|---|---|---|
LMK6C/D/P/H | 초저 지터 오실레이터(LVCMOS, LVDS, LVPECL 및 HCSL 출력 형식) | ASIC, MCU, 이미지 센서, 오디오 코덱, HDMI/SDI 및 이더넷 PHY의 레퍼런스 클록 | 1MHz~400MHz 사이의 모든 주파수, ±25ppm 주파수 정확도, 200fs RMS 지터 |
CDC6C | 저전력 LVCMOS 오실레이터 | ASIC, MCU, 이미지 센서, 오디오 코덱 및 이더넷 PHY의 레퍼런스 클록 | 250kHz~200MHz 사이의 표준 주파수, ±50ppm 주파수 정확도, 1ps RMS 지터 |
LMK1Cxxxx | 1:x LVCMOS 버퍼 | 팬아웃하여 MCU, PHYs 및 HDMI/SDI를 클로킹 | 1.8V~3.3V 공급, 20fs의 초저 가산 지터 |
TPL5010 | 나노타이머 | 전원 게이팅 기능이 있는 초저전력 시스템 타이머 | 1.8V~5.5V 공급, 일반 전류 소비 35nA |
TI PROVIDES TECHNICAL AND RELIABILITY DATA (INCLUDING DATASHEETS), DESIGN RESOURCES (INCLUDING REFERENCE DESIGNS), APPLICATION OR OTHER DESIGN ADVICE, WEB TOOLS, SAFETY INFORMATION, AND OTHER RESOURCES “AS IS” AND WITH ALL FAULTS, AND DISCLAIMS ALL WARRANTIES, EXPRESS AND IMPLIED, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY RIGHTS.
These resources are intended for skilled developers designing with TI products. You are solely responsible for (1) selecting the appropriate TI products for your application, (2) designing, validating and testing your application, and (3) ensuring your application meets applicable standards, and any other safety, security, or other requirements. These resources are subject to change without notice. TI grants you permission to use these resources only for development of an application that uses the TI products described in the resource. Other reproduction and display of these resources is prohibited. No license is granted to any other TI intellectual property right or to any third party intellectual property right. TI disclaims responsibility for, and you will fully indemnify TI and its representatives against, any claims, damages, costs, losses, and liabilities arising out of your use of these resources.
TI’s products are provided subject to TI’s Terms of Sale (www.ti.com/legal/termsofsale.html) or other applicable terms available either on ti.com or provided in conjunction with such TI products. TI’s provision of these resources does not expand or otherwise alter TI’s applicable warranties or warranty disclaimers for TI products.IMPORTANT NOTICE
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2024, Texas Instruments Incorporated