SLLU314 March   2020 ISO1044

 

  1.   ISO1044 Isolated CAN Transceiver Evaluation Module
    1.     Trademarks
    2. 1 Introduction
    3. 2 Overview
    4. 3 Pin Configuration of the ISO1044 CAN Transceiver
    5. 4 ISO1044 Board Block Diagram and Image
    6. 5 EVM Schematics and Layout
    7. 6 Bill of Materials
      1. 6.1 Bill of Materials
    8. 7 EVM Setup and Operation
      1. 7.1 Protection Configurations

ISO1044 Isolated CAN Transceiver Evaluation Module

This user’s guide describes the evaluation module (EVM) for the family of ISO1044 isolated CAN transceivers. This EVM allows designers to evaluate device performance for fast development and analysis of isolated systems. The EVM supports evaluation of all ISO1044 devices in a 8-pin SOIC (D) package.

CAUTION

This evaluation module is made available for isolator parameter performance evaluation only and is not intended for isolation voltage testing. To prevent damage to the EVM, any voltage applied as a supply or digital input/output must be maintained within the 0 V to 5.5 V recommended operating range.